On Fri, Apr 22, 2016 at 10:27 AM, Budur Nagaraju <nbud...@gmail.com> wrote: > HI > > I thought Its promiscuous mode issue ,after reboot of engine unable to reach > again ? is there anyways to resolve ?
Are you using a nested env? > Thanks, > Nagaraju > > > On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju <nbud...@gmail.com> wrote: >> >> I found the solution ,promiscuous mode was rejecting the packets this was >> causing the issue ,enabled and now able to ping without any issues. >> Thanks for the support ! >> >> On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbud...@gmail.com> wrote: >>> >>> HI >>> >>> Any updates issue is blocking ? >>> >>> Thanks, >>> Nagaraju >>> >>> >>> On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbud...@gmail.com> >>> wrote: >>>> >>>> Below are the details, unable to ping the gateway from the ovirt engine >>>> ,able to ping the ovirt engine from host as both are there in the same >>>> network. >>>> >>>> >>>> [root@oe ~]# ip addr >>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>>> inet 127.0.0.1/8 scope host lo >>>> inet6 ::1/128 scope host >>>> valid_lft forever preferred_lft forever >>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>>> state UP qlen 1000 >>>> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff >>>> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0 >>>> inet6 fe80::216:3eff:fe33:38e5/64 scope link >>>> valid_lft forever preferred_lft forever >>>> [root@oe ~]# >>>> [root@oe ~]# >>>> [root@oe ~]# >>>> [root@oe ~]# ip route >>>> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9 >>>> 169.254.0.0/16 dev eth0 scope link metric 1002 >>>> default via 10.206.67.254 dev eth0 >>>> [root@oe ~]# >>>> [root@oe ~]# >>>> [root@oe ~]# >>>> [root@oe ~]# brctl show >>>> bridge name bridge id STP enabled interfaces >>>> [root@oe ~]# >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <d...@redhat.com> >>>> wrote: >>>>> >>>>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbud...@gmail.com> >>>>> wrote: >>>>> > HI >>>>> > >>>>> > Installed hosted engine and after configuring IP to ovirt engine >>>>> > unable to >>>>> > ping the gateway and found that there is no issue with the Network . >>>>> >>>>> You mean that from inside the engine machine, you cannot ping the >>>>> gateway? >>>>> >>>>> Can you ping it from the host? >>>>> >>>>> Please share output of these commands, from both the host and the >>>>> engine vm: >>>>> >>>>> ip addr >>>>> ip route >>>>> brctl show >>>>> >>>>> Thanks, >>>>> >>>>> > >>>>> > Is there any thing am missing while installing Hosted engine ? below >>>>> > is >>>>> > output details, >>>>> > >>>>> > >>>>> > --== CONFIGURATION PREVIEW ==-- >>>>> > >>>>> > Engine FQDN : oe.bnglab.psecure.net >>>>> > Bridge name : ovirtmgmt >>>>> > SSH daemon port : 22 >>>>> > Gateway address : 10.206.67.254 >>>>> > Host name for web application : hosted_engine_1 >>>>> > Host ID : 1 >>>>> > Image alias : hosted_engine >>>>> > Image size GB : 25 >>>>> > Storage connection : >>>>> > 10.204.207.152:/home/heoe >>>>> > Console type : vnc >>>>> > Memory size MB : 4096 >>>>> > MAC address : 00:16:3e:2f:5c:40 >>>>> > Boot type : cdrom >>>>> > Number of CPUs : 2 >>>>> > ISO image (for cdrom boot) : >>>>> > /ovirt/CentOS-6.7-x86_64-minimal.iso >>>>> > CPU Type : model_SandyBridge >>>>> > >>>>> > Please confirm installation settings (Yes, No)[Yes]: yes >>>>> > [ INFO ] Stage: Transaction setup >>>>> > [ INFO ] Stage: Misc configuration >>>>> > [ INFO ] Stage: Package installation >>>>> > [ INFO ] Stage: Misc configuration >>>>> > [ INFO ] Configuring libvirt >>>>> > [ INFO ] Configuring VDSM >>>>> > [ INFO ] Starting vdsmd >>>>> > [ INFO ] Waiting for VDSM hardware info >>>>> > [ INFO ] Waiting for VDSM hardware info >>>>> > [ INFO ] Creating Storage Domain >>>>> > [ INFO ] Creating Storage Pool >>>>> > [ INFO ] Connecting Storage Pool >>>>> > [ INFO ] Verifying sanlock lockspace initialization >>>>> > [ INFO ] Creating VM Image >>>>> > [ INFO ] Disconnecting Storage Pool >>>>> > [ INFO ] Start monitoring domain >>>>> > [ INFO ] Configuring VM >>>>> > [ INFO ] Updating hosted-engine configuration >>>>> > [ INFO ] Stage: Transaction commit >>>>> > [ INFO ] Stage: Closing up >>>>> > The following network ports should be opened: >>>>> > tcp:5900 >>>>> > tcp:5901 >>>>> > udp:5900 >>>>> > udp:5901 >>>>> > An example of the required configuration for iptables can >>>>> > be found >>>>> > at: >>>>> > /etc/ovirt-hosted-engine/iptables.example >>>>> > In order to configure firewalld, copy the files from >>>>> > /etc/ovirt-hosted-engine/firewalld to >>>>> > /etc/firewalld/services >>>>> > and execute the following commands: >>>>> > firewall-cmd -service hosted-console >>>>> > [ INFO ] Creating VM >>>>> > You can now connect to the VM with the following command: >>>>> > /usr/bin/remote-viewer vnc://localhost:5900 >>>>> > Use temporary password "2049ZfXr" to connect to vnc >>>>> > console. >>>>> > Please note that in order to use remote-viewer you need to >>>>> > be able >>>>> > to run graphical applications. >>>>> > This means that if you are using ssh you have to supply the >>>>> > -Y >>>>> > flag (enables trusted X11 forwarding). >>>>> > Otherwise you can run the command from a terminal in your >>>>> > preferred desktop environment. >>>>> > If you cannot run graphical applications you can connect to >>>>> > the >>>>> > graphic console from another host or connect to the console using the >>>>> > following command: >>>>> > virsh -c qemu+tls://Test/system console HostedEngine >>>>> > If you need to reboot the VM you will need to start it >>>>> > manually >>>>> > using the command: >>>>> > hosted-engine --vm-start >>>>> > You can then set a temporary password using the command: >>>>> > hosted-engine --add-console-password >>>>> > The VM has been started. Install the OS and shut down or >>>>> > reboot >>>>> > it. To continue please make a selection: >>>>> > >>>>> > (1) Continue setup - VM installation is complete >>>>> > (2) Reboot the VM and restart installation >>>>> > (3) Abort setup >>>>> > (4) Destroy VM and abort setup >>>>> > >>>>> > _______________________________________________ >>>>> > Users mailing list >>>>> > Users@ovirt.org >>>>> > http://lists.ovirt.org/mailman/listinfo/users >>>>> > >>>>> >>>>> >>>>> >>>>> -- >>>>> Didi >>>> >>>> >>> >> > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users