Hello, What's "couple of vdsm hooks"? Could you provide the source code of those?
Regards, Yevgeny On Mon, Jul 4, 2016 at 1:43 PM, Giorgio Biacchi <[email protected]> wrote: > Hi list, > I'm trying a test installation of the new Ovirt Node Image and engine > before > upgrading my 3.6 installation. > > In my current environment every hypervisor access the NFS shared data > domain via > infiniband. With a couple of vdsm hooks I was able to set the infiniband > link in > connected mode and set a MTU of 65520. In my case the infiniband link is > used as > a common NIC, I don't use RDMA, only IP over infiniband to access the data > domain. > > Now, when I attempt to setup host networking, the system try to bridge the > connection "ibstorage" (defined in networks tab) with ib0 device. But a non > ethernet device cannot be bridged that way and host networking setup fails. > > Any idea or suggestion? With 3.6 (node and engine) all was fine. > > Thanks > -- > gb > > PGP Key: http://pgp.mit.edu/ > Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34 > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
