OK, it seems that my config volume for the hosted engine is empty, I cannot tar anything out of it and I'm quite sure it has been empty for ever as I got some strange warning every time.
Is there a way to recover that from files ? Backups/snapshots are empty so... 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: > On Thu, Jul 21, 2016 at 12:38 PM, Matt . <yamakasi....@gmail.com> wrote: >> The deploy went OK from the GUI but it's still not "active" as Hosted >> engine Host. The install also wen very fast so it looked like it >> didn't do anything witl the deploy setting in the GUI @ the hosted >> engine tab. > > The difference with a standard host is just that it should create > /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent > and ovirt-ha-broker so it shouldn't be that longer. > > At the end, due to the issue with syncing the local maintenance mode > from the engine, you have to connect to the host and run > 'hosted-engine -set-maintenance --mode=none' from there. > > Can you please post the result of > hosted-engine --vm-status and the status of ovirt-ha-agent? > >> Or should I re-deploy again on the commandline after adding the host >> through the GUI ? >> >> About the initial GW, I didn't see that in the GUI. >> >> 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>> On Thu, Jul 21, 2016 at 12:28 PM, Matt . <yamakasi....@gmail.com> wrote: >>>> No problem I checked it out and applied it, no solution it seems. >>> >>> Do you mean that it's still referring to your initial gateway or that >>> the deploy failed? >>> >>>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>> On Thu, Jul 21, 2016 at 12:09 PM, Matt . <yamakasi....@gmail.com> wrote: >>>>>> OK, I did a deploy from the engine and the Hosted is "Not Active" and >>>>> >>>>> Yes, sorry, I forgot to mention that. >>>>> We have an open bug about re-activating an hosted-engine host from the >>>>> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >>>>> Connecting to the host and exiting the maintenance mode from there is >>>>> the temporary solution. >>>>> >>>>>> Engine HA is empty on 4.0.1 >>>>>> >>>>>> 2016-07-21 11:58 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>>>>>> True, but you can up an IP on any device in that case because you know >>>>>>> what you are doing. >>>>>>> >>>>>>> I think that this can be finetuned, or at least multiple IPs would be >>>>>>> nice as I now need to add one IP from my vrrp setup, so if there is a >>>>>>> failover.... or I need to take down the second switch I'm also done. >>>>>>> >>>>>>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . <yamakasi....@gmail.com> >>>>>>>> wrote: >>>>>>>>> OK, I will check this laster on, as I was having issues with the >>>>>>>>> deploy from the GUI before as nothing really happened, I thought it >>>>>>>>> was a bug on the first 4.0 release ? >>>>>>>>> >>>>>>>>> I think this should be investigated, the whole deployment as it would >>>>>>>>> be good to have the possibility to list some GW's in case you use >>>>>>>>> failover. >>>>>>>>> >>>>>>>>> I was even thinking of setting the engine IP there, should be working >>>>>>>>> as good as also. >>>>>>>> >>>>>>>> Not really since the agent is pinging also when the engine VM is down >>>>>>>> due to maintenance. >>>>>>>> >>>>>>>>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . <yamakasi....@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>>> OK, I already thought that but where is this saved as I don't have >>>>>>>>>>> any >>>>>>>>>>> rights as root to the ha_agent folder on the HE storage ? >>>>>>>>>> >>>>>>>>>> It's not a folder: it's a tar file directly saved over a VDSM volume. >>>>>>>>>> Editing it's a bit tricky. >>>>>>>>>> >>>>>>>>>>> In worst case scenario, how would i be able to deploy a new hosted >>>>>>>>>>> engine from a hosted engine ? This sounds undoable to me and also >>>>>>>>>>> unwanted as the HE is OK so far. >>>>>>>>>> >>>>>>>>>> With a 4.0 engine, when you choose to deploy a new host from the >>>>>>>>>> webadmin or from the rest API you can also choose to deploy it as an >>>>>>>>>> hosted-engine host if the engine has been deployed with >>>>>>>>>> hosted-engine. >>>>>>>>>> In this case, if I'm not wrong, you can also specify a different >>>>>>>>>> gateway value. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>>>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . <yamakasi....@gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>>> Even when I change that on each host before I do a new deploy it >>>>>>>>>>>>> still >>>>>>>>>>>>> uses the old GW address. >>>>>>>>>>>> >>>>>>>>>>>> If you deploy additional hosts with the CLI utility, each new host >>>>>>>>>>>> will be deployed consuming the answerfile generated by the first >>>>>>>>>>>> host >>>>>>>>>>>> and saved on the shared storage. >>>>>>>>>>>> You have to manually tweak there if you to avoid. >>>>>>>>>>>> >>>>>>>>>>>> Another smarted option is to deploy additional HE host from the >>>>>>>>>>>> webadmin interface. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>>>>>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . >>>>>>>>>>>>>> <yamakasi....@gmail.com> wrote: >>>>>>>>>>>>>>> OK, I tried to edit the answerfiles on the other hosts to use >>>>>>>>>>>>>>> another >>>>>>>>>>>>>>> IP but it doesn't ping and still uses the old GW address. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> The gateway address is saved under >>>>>>>>>>>>>> /etc/ovirt-hosted-engine/hosted-engine.conf >>>>>>>>>>>>>> on each host. >>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2016-07-20 22:27 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>>>>>>>>>>>>>>> Maybe it's a good idea to be able to add multiple addresses it >>>>>>>>>>>>>>>> should >>>>>>>>>>>>>>>> ping in order of response. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola >>>>>>>>>>>>>>>> <sbona...@redhat.com>: >>>>>>>>>>>>>>>>> Il 20/Lug/2016 10:06 PM, "Matt ." <yamakasi....@gmail.com> ha >>>>>>>>>>>>>>>>> scritto: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I'm trying to add a host to a HE installation but my gateway >>>>>>>>>>>>>>>>>> is not >>>>>>>>>>>>>>>>>> pingable. It's a floating IP which is usable but not >>>>>>>>>>>>>>>>>> pingable in this >>>>>>>>>>>>>>>>>> case. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> During the first install of the HE I could give any IP to >>>>>>>>>>>>>>>>>> ping and I >>>>>>>>>>>>>>>>>> used a source IP for the floating GW address. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> What can I do to get around this as the network is OK, even >>>>>>>>>>>>>>>>>> when the >>>>>>>>>>>>>>>>>> GW is not pingable. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I think that gw not pingable will be interpreted as network >>>>>>>>>>>>>>>>> failure by the >>>>>>>>>>>>>>>>> agent and will lower the score of the hosts. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Any idea is welcome! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks! >>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>>>>>> Users@ovirt.org >>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users