OK, it seems that a snapshot was having the files but linux didn't saw a change between the images as the size was still the same.
I'm going to dd back :) 2016-07-21 20:04 GMT+02:00 Matt . <yamakasi....@gmail.com>: > OK, it seems that my config volume for the hosted engine is empty, I > cannot tar anything out of it and I'm quite sure it has been empty for > ever as I got some strange warning every time. > > Is there a way to recover that from files ? Backups/snapshots are empty so... > > 2016-07-21 13:43 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >> On Thu, Jul 21, 2016 at 12:38 PM, Matt . <yamakasi....@gmail.com> wrote: >>> The deploy went OK from the GUI but it's still not "active" as Hosted >>> engine Host. The install also wen very fast so it looked like it >>> didn't do anything witl the deploy setting in the GUI @ the hosted >>> engine tab. >> >> The difference with a standard host is just that it should create >> /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent >> and ovirt-ha-broker so it shouldn't be that longer. >> >> At the end, due to the issue with syncing the local maintenance mode >> from the engine, you have to connect to the host and run >> 'hosted-engine -set-maintenance --mode=none' from there. >> >> Can you please post the result of >> hosted-engine --vm-status and the status of ovirt-ha-agent? >> >>> Or should I re-deploy again on the commandline after adding the host >>> through the GUI ? >>> >>> About the initial GW, I didn't see that in the GUI. >>> >>> 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>> On Thu, Jul 21, 2016 at 12:28 PM, Matt . <yamakasi....@gmail.com> wrote: >>>>> No problem I checked it out and applied it, no solution it seems. >>>> >>>> Do you mean that it's still referring to your initial gateway or that >>>> the deploy failed? >>>> >>>>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>> On Thu, Jul 21, 2016 at 12:09 PM, Matt . <yamakasi....@gmail.com> wrote: >>>>>>> OK, I did a deploy from the engine and the Hosted is "Not Active" and >>>>>> >>>>>> Yes, sorry, I forgot to mention that. >>>>>> We have an open bug about re-activating an hosted-engine host from the >>>>>> engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 >>>>>> Connecting to the host and exiting the maintenance mode from there is >>>>>> the temporary solution. >>>>>> >>>>>>> Engine HA is empty on 4.0.1 >>>>>>> >>>>>>> 2016-07-21 11:58 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>>>>>>> True, but you can up an IP on any device in that case because you know >>>>>>>> what you are doing. >>>>>>>> >>>>>>>> I think that this can be finetuned, or at least multiple IPs would be >>>>>>>> nice as I now need to add one IP from my vrrp setup, so if there is a >>>>>>>> failover.... or I need to take down the second switch I'm also done. >>>>>>>> >>>>>>>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . <yamakasi....@gmail.com> >>>>>>>>> wrote: >>>>>>>>>> OK, I will check this laster on, as I was having issues with the >>>>>>>>>> deploy from the GUI before as nothing really happened, I thought it >>>>>>>>>> was a bug on the first 4.0 release ? >>>>>>>>>> >>>>>>>>>> I think this should be investigated, the whole deployment as it would >>>>>>>>>> be good to have the possibility to list some GW's in case you use >>>>>>>>>> failover. >>>>>>>>>> >>>>>>>>>> I was even thinking of setting the engine IP there, should be working >>>>>>>>>> as good as also. >>>>>>>>> >>>>>>>>> Not really since the agent is pinging also when the engine VM is down >>>>>>>>> due to maintenance. >>>>>>>>> >>>>>>>>>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . <yamakasi....@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>>> OK, I already thought that but where is this saved as I don't have >>>>>>>>>>>> any >>>>>>>>>>>> rights as root to the ha_agent folder on the HE storage ? >>>>>>>>>>> >>>>>>>>>>> It's not a folder: it's a tar file directly saved over a VDSM >>>>>>>>>>> volume. >>>>>>>>>>> Editing it's a bit tricky. >>>>>>>>>>> >>>>>>>>>>>> In worst case scenario, how would i be able to deploy a new hosted >>>>>>>>>>>> engine from a hosted engine ? This sounds undoable to me and also >>>>>>>>>>>> unwanted as the HE is OK so far. >>>>>>>>>>> >>>>>>>>>>> With a 4.0 engine, when you choose to deploy a new host from the >>>>>>>>>>> webadmin or from the rest API you can also choose to deploy it as an >>>>>>>>>>> hosted-engine host if the engine has been deployed with >>>>>>>>>>> hosted-engine. >>>>>>>>>>> In this case, if I'm not wrong, you can also specify a different >>>>>>>>>>> gateway value. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>>>>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . <yamakasi....@gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> Even when I change that on each host before I do a new deploy it >>>>>>>>>>>>>> still >>>>>>>>>>>>>> uses the old GW address. >>>>>>>>>>>>> >>>>>>>>>>>>> If you deploy additional hosts with the CLI utility, each new host >>>>>>>>>>>>> will be deployed consuming the answerfile generated by the first >>>>>>>>>>>>> host >>>>>>>>>>>>> and saved on the shared storage. >>>>>>>>>>>>> You have to manually tweak there if you to avoid. >>>>>>>>>>>>> >>>>>>>>>>>>> Another smarted option is to deploy additional HE host from the >>>>>>>>>>>>> webadmin interface. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi >>>>>>>>>>>>>> <stira...@redhat.com>: >>>>>>>>>>>>>>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . >>>>>>>>>>>>>>> <yamakasi....@gmail.com> wrote: >>>>>>>>>>>>>>>> OK, I tried to edit the answerfiles on the other hosts to use >>>>>>>>>>>>>>>> another >>>>>>>>>>>>>>>> IP but it doesn't ping and still uses the old GW address. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The gateway address is saved under >>>>>>>>>>>>>>> /etc/ovirt-hosted-engine/hosted-engine.conf >>>>>>>>>>>>>>> on each host. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2016-07-20 22:27 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>>>>>>>>>>>>>>>> Maybe it's a good idea to be able to add multiple addresses >>>>>>>>>>>>>>>>> it should >>>>>>>>>>>>>>>>> ping in order of response. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola >>>>>>>>>>>>>>>>> <sbona...@redhat.com>: >>>>>>>>>>>>>>>>>> Il 20/Lug/2016 10:06 PM, "Matt ." <yamakasi....@gmail.com> >>>>>>>>>>>>>>>>>> ha scritto: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'm trying to add a host to a HE installation but my >>>>>>>>>>>>>>>>>>> gateway is not >>>>>>>>>>>>>>>>>>> pingable. It's a floating IP which is usable but not >>>>>>>>>>>>>>>>>>> pingable in this >>>>>>>>>>>>>>>>>>> case. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> During the first install of the HE I could give any IP to >>>>>>>>>>>>>>>>>>> ping and I >>>>>>>>>>>>>>>>>>> used a source IP for the floating GW address. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> What can I do to get around this as the network is OK, even >>>>>>>>>>>>>>>>>>> when the >>>>>>>>>>>>>>>>>>> GW is not pingable. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I think that gw not pingable will be interpreted as network >>>>>>>>>>>>>>>>>> failure by the >>>>>>>>>>>>>>>>>> agent and will lower the score of the hosts. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Any idea is welcome! >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks! >>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>>>>>>> Users@ovirt.org >>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users