Hi, Is the iSCSI domain that supposed to be connected through the bond the current master domain?
Also, can you please provide the output of 'iscsiadm -m session -P3' ? Thanks On Mon, Aug 15, 2016 at 4:31 PM, Uwe Laverenz <u...@laverenz.de> wrote: > Hi all, > > I'd like to test iSCSI multipathing with OVirt 4.02 and see the following > problem: if I try to add an iSCSI-Bond the host loses connection to _all_ > storage domains. > > I guess I'm doing something wrong. :) > > I have built a small test environment for this: > > The storage is provided by a freenas box with two dedicated interfaces for > two separate iSCSI networks. > > Each interface has one address in one network (no VLANs, no trunking). For > each network there is one portal configured. Both portals point to the same > target. The target has 4 LUNs. > > The host also has two dedicated interfaces for iSCSI and finds the target > over both portals, all LUNs are selected for use and show 2 paths. > > My questions: > > 1) Is this setup ok or did I miss something? > > 2) The LUNs already show 2 paths (multipath -ll), one "active" and one > "enabled", what difference would a Datacenter iSCSI-bond make? > > 3) What combination of checkboxes do I have to use? > > Logical Letworks > > [ ] ISCSIA > [ ] ISCSIB > > Storage Targets > > [ ] iqn.2005-10.org.freenas.ctl:tgt01 10.0.131.121 3260 > [ ] iqn.2005-10.org.freenas.ctl:tgt01 10.0.132.121 3260 > > > As stated in the beginning: all my tests made the host lose connection to > all storage domains (NFS included) and I can not see what I am doing wrong. > > Thank you very much! > > cu, > Uwe > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users