Here is the output of of the commands /proc/scsi/scsi and blkid
http://pastebin.com/GgL61Wcu On Tue, Sep 20, 2016 at 8:56 PM, Budur Nagaraju <nbud...@gmail.com> wrote: > Noting more configuration ,if I configure openfiler as a iSCSI Lun able > to detect the lun , moment I configure EMC Lun unable to detect the Lun ID . > > Any other configs do I need to do in Host ? any comands to delete the old > Lun ID ? > > .[root@pbuovirt3 ~]# cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 03 Id: 00 Lun: 00 > Vendor: HP Model: P410i Rev: 2.00 > Type: RAID ANSI SCSI revision: 00 > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: HP Model: LOGICAL VOLUME Rev: 2.00 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: Optiarc Model: DVD RW AD-7561S Rev: AH52 > Type: CD-ROM ANSI SCSI revision: 05 > Host: scsi8 Channel: 00 Id: 00 Lun: 00 > Vendor: DGC Model: LUNZ Rev: 3103 > Type: Direct-Access ANSI SCSI revision: 04 > [root@pbuovirt3 ~]# > > > > > > On Tue, Sep 20, 2016 at 8:51 PM, Dan Yasny <dya...@gmail.com> wrote: > >> It looks like iscsi does the job, bu multipath doesn't. What do you use >> on the hosts? How is multipath.conf configured? Any other special >> configuration you use? >> >> Also, can you paste /proc/scsi/scsi and blkid >> >> On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju <nbud...@gmail.com> >> wrote: >> >>> >>> Below are the details, >>> >>> http://pastebin.com/aLBMH3Q6 >>> >>> On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny <dya...@gmail.com> wrote: >>> >>>> Try this on the host: >>>> >>>> iscsiadm -m discovery -t st -p 10.206.67.46 >>>> iscsiadm -m node -L all >>>> iscsiadm -m node >>>> iscsiadm -m session >>>> multipath -ll >>>> >>>> and pastebin the output >>>> >>>> On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju <nbud...@gmail.com> >>>> wrote: >>>> >>>>> Yes I did that too but no luck :( >>>>> >>>>> Thanks, >>>>> Nagaraju >>>>> >>>>> >>>>> On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny <dya...@gmail.com> wrote: >>>>> >>>>>> After you discover, did you also click the login button? >>>>>> >>>>>> On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju <nbud...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Below are the Steps, >>>>>>> >>>>>>> Under Storage Tab:New Domain -->Name>Domain >>>>>>> Type-->Data/iSCSi-->Select the Host -->Discover the Targets , >>>>>>> >>>>>>> After giving all the info able to detect the iSCSI targets but uable >>>>>>> to get the Lun id ,below are the details of the logs. >>>>>>> >>>>>>> >>>>>>> http://pastebin.com/ph1YSqhH >>>>>>> >>>>>>> Thanks, >>>>>>> Nagaraju >>>>>>> >>>>>>> >>>>>>> On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny <dya...@gmail.com> wrote: >>>>>>> >>>>>>>> Can you describe what you tried to do and how it failed? >>>>>>>> >>>>>>>> On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju <nbud...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> HI All, >>>>>>>>> >>>>>>>>> While configuring iSCSI LUN is not getting detected any documents >>>>>>>>> to configure iSCSI in oVirt ? >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> Nagaraju >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list >>>>>>>>> Users@ovirt.org >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users