> Should it be? It was not in the instructions for the migration from > bare-metal to Hosted VM
The hosted engine will only migrate to hosts that have the services running. Please put one other host to maintenance and select Hosted engine action: DEPLOY in the reinstall dialog. Best regards Martin Sivak On Tue, Jun 27, 2017 at 1:23 PM, cmc <[email protected]> wrote: > I changed the 'os.other.devices.display.protocols.value.3.6 = > spice/qxl,vnc/cirrus,vnc/qxl' line to have the same display protocols > as 4 and the hosted engine now appears in the list of VMs. I am > guessing the compatibility version was causing it to use the 3.6 > version. However, I am still unable to migrate the engine VM to > another host. When I try putting the host it is currently on into > maintenance, it reports: > > Error while executing action: Cannot switch the Host(s) to Maintenance mode. > There are no available hosts capable of running the engine VM. > > Running 'hosted-engine --vm-status' still shows 'Engine status: > unknown stale-data'. > > The ovirt-ha-broker service is only running on one host. It was set to > 'disabled' in systemd. It won't start as there is no > /etc/ovirt-hosted-engine/hosted-engine.conf on the other two hosts. > Should it be? It was not in the instructions for the migration from > bare-metal to Hosted VM > > Thanks, > > Cam > > On Thu, Jun 22, 2017 at 1:07 PM, cmc <[email protected]> wrote: >> Hi Tomas, >> >> So in my /usr/share/ovirt-engine/conf/osinfo-defaults.properties on my >> engine VM, I have: >> >> os.other.devices.display.protocols.value = >> spice/qxl,vnc/vga,vnc/qxl,vnc/cirrus >> os.other.devices.display.protocols.value.3.6 = spice/qxl,vnc/cirrus,vnc/qxl >> >> That seems to match - I assume since this is 4.1, the 3.6 should not apply >> >> Is there somewhere else I should be looking? >> >> Thanks, >> >> Cam >> >> On Thu, Jun 22, 2017 at 11:40 AM, Tomas Jelinek <[email protected]> wrote: >>> >>> >>> On Thu, Jun 22, 2017 at 12:38 PM, Michal Skrivanek >>> <[email protected]> wrote: >>>> >>>> >>>> > On 22 Jun 2017, at 12:31, Martin Sivak <[email protected]> wrote: >>>> > >>>> > Tomas, what fields are needed in a VM to pass the check that causes >>>> > the following error? >>>> > >>>> >>>>> WARN [org.ovirt.engine.core.bll.exportimport.ImportVmCommand] >>>> >>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action >>>> >>>>> 'ImportVm' >>>> >>>>> failed for user SYSTEM. Reasons: VAR__ACTION__IMPORT >>>> >>>>> >>>> >>>>> ,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS >>>> >>>> to match the OS and VM Display type;-) >>>> Configuration is in osinfo….e.g. if that is import from older releases on >>>> Linux this is typically caused by the cahgen of cirrus to vga for non-SPICE >>>> VMs >>> >>> >>> yep, the default supported combinations for 4.0+ is this: >>> os.other.devices.display.protocols.value = >>> spice/qxl,vnc/vga,vnc/qxl,vnc/cirrus >>> >>>> >>>> >>>> > >>>> > Thanks. >>>> > >>>> > On Thu, Jun 22, 2017 at 12:19 PM, cmc <[email protected]> wrote: >>>> >> Hi Martin, >>>> >> >>>> >>> >>>> >>> just as a random comment, do you still have the database backup from >>>> >>> the bare metal -> VM attempt? It might be possible to just try again >>>> >>> using it. Or in the worst case.. update the offending value there >>>> >>> before restoring it to the new engine instance. >>>> >> >>>> >> I still have the backup. I'd rather do the latter, as re-running the >>>> >> HE deployment is quite lengthy and involved (I have to re-initialise >>>> >> the FC storage each time). Do you know what the offending value(s) >>>> >> would be? Would it be in the Postgres DB or in a config file >>>> >> somewhere? >>>> >> >>>> >> Cheers, >>>> >> >>>> >> Cam >>>> >> >>>> >>> Regards >>>> >>> >>>> >>> Martin Sivak >>>> >>> >>>> >>> On Thu, Jun 22, 2017 at 11:39 AM, cmc <[email protected]> wrote: >>>> >>>> Hi Yanir, >>>> >>>> >>>> >>>> Thanks for the reply. >>>> >>>> >>>> >>>>> First of all, maybe a chain reaction of : >>>> >>>>> WARN [org.ovirt.engine.core.bll.exportimport.ImportVmCommand] >>>> >>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action >>>> >>>>> 'ImportVm' >>>> >>>>> failed for user SYSTEM. Reasons: VAR__ACTION__IMPORT >>>> >>>>> >>>> >>>>> ,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS >>>> >>>>> is causing the hosted engine vm not to be set up correctly and >>>> >>>>> further >>>> >>>>> actions were made when the hosted engine vm wasnt in a stable state. >>>> >>>>> >>>> >>>>> As for now, are you trying to revert back to a previous/initial >>>> >>>>> state ? >>>> >>>> >>>> >>>> I'm not trying to revert it to a previous state for now. This was a >>>> >>>> migration from a bare metal engine, and it didn't report any error >>>> >>>> during the migration. I'd had some problems on my first attempts at >>>> >>>> this migration, whereby it never completed (due to a proxy issue) but >>>> >>>> I managed to resolve this. Do you know of a way to get the Hosted >>>> >>>> Engine VM into a stable state, without rebuilding the entire cluster >>>> >>>> from scratch (since I have a lot of VMs on it)? >>>> >>>> >>>> >>>> Thanks for any help. >>>> >>>> >>>> >>>> Regards, >>>> >>>> >>>> >>>> Cam >>>> >>>> >>>> >>>>> Regards, >>>> >>>>> Yanir >>>> >>>>> >>>> >>>>> On Wed, Jun 21, 2017 at 4:32 PM, cmc <[email protected]> wrote: >>>> >>>>>> >>>> >>>>>> Hi Jenny/Martin, >>>> >>>>>> >>>> >>>>>> Any idea what I can do here? The hosted engine VM has no log on any >>>> >>>>>> host in /var/log/libvirt/qemu, and I fear that if I need to put the >>>> >>>>>> host into maintenance, e.g., to upgrade it that I created it on >>>> >>>>>> (which >>>> >>>>>> I think is hosting it), or if it fails for any reason, it won't get >>>> >>>>>> migrated to another host, and I will not be able to manage the >>>> >>>>>> cluster. It seems to be a very dangerous position to be in. >>>> >>>>>> >>>> >>>>>> Thanks, >>>> >>>>>> >>>> >>>>>> Cam >>>> >>>>>> >>>> >>>>>> On Wed, Jun 21, 2017 at 11:48 AM, cmc <[email protected]> wrote: >>>> >>>>>>> Thanks Martin. The hosts are all part of the same cluster. >>>> >>>>>>> >>>> >>>>>>> I get these errors in the engine.log on the engine: >>>> >>>>>>> >>>> >>>>>>> 2017-06-19 03:28:05,030Z WARN >>>> >>>>>>> [org.ovirt.engine.core.bll.exportimport.ImportVmCommand] >>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Validation of action >>>> >>>>>>> 'ImportVm' >>>> >>>>>>> failed for user SYST >>>> >>>>>>> EM. Reasons: >>>> >>>>>>> >>>> >>>>>>> VAR__ACTION__IMPORT,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_VM_DISPLAY_TYPE_IS_NOT_SUPPORTED_BY_OS >>>> >>>>>>> 2017-06-19 03:28:05,030Z INFO >>>> >>>>>>> [org.ovirt.engine.core.bll.exportimport.ImportVmCommand] >>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Lock freed to object >>>> >>>>>>> 'EngineLock:{exclusiveLocks='[a >>>> >>>>>>> 79e6b0e-fff4-4cba-a02c-4c00be151300=<VM, >>>> >>>>>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName HostedEngine>, >>>> >>>>>>> HostedEngine=<VM_NAME, ACTION_TYPE_FAILED_NAME_ALREADY_USED>]', >>>> >>>>>>> sharedLocks= >>>> >>>>>>> '[a79e6b0e-fff4-4cba-a02c-4c00be151300=<REMOTE_VM, >>>> >>>>>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName HostedEngine>]'}' >>>> >>>>>>> 2017-06-19 03:28:05,030Z ERROR >>>> >>>>>>> [org.ovirt.engine.core.bll.HostedEngineImporter] >>>> >>>>>>> (org.ovirt.thread.pool-6-thread-23) [] Failed importing the Hosted >>>> >>>>>>> Engine VM >>>> >>>>>>> >>>> >>>>>>> The sanlock.log reports conflicts on that same host, and a >>>> >>>>>>> different >>>> >>>>>>> error on the other hosts, not sure if they are related. >>>> >>>>>>> >>>> >>>>>>> And this in the /var/log/ovirt-hosted-engine-ha/agent log on the >>>> >>>>>>> host >>>> >>>>>>> which I deployed the hosted engine VM on: >>>> >>>>>>> >>>> >>>>>>> MainThread::ERROR::2017-06-19 >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> 13:09:49,743::ovf_store::124::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(getEngineVMOVF) >>>> >>>>>>> Unable to extract HEVM OVF >>>> >>>>>>> MainThread::ERROR::2017-06-19 >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> 13:09:49,743::config::445::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(_get_vm_conf_content_from_ovf_store) >>>> >>>>>>> Failed extracting VM OVF from the OVF_STORE volume, falling back >>>> >>>>>>> to >>>> >>>>>>> initial vm.conf >>>> >>>>>>> >>>> >>>>>>> I've seen some of these issues reported in bugzilla, but they were >>>> >>>>>>> for >>>> >>>>>>> older versions of oVirt (and appear to be resolved). >>>> >>>>>>> >>>> >>>>>>> I will install that package on the other two hosts, for which I >>>> >>>>>>> will >>>> >>>>>>> put them in maintenance as vdsm is installed as an upgrade. I >>>> >>>>>>> guess >>>> >>>>>>> restarting vdsm is a good idea after that? >>>> >>>>>>> >>>> >>>>>>> Thanks, >>>> >>>>>>> >>>> >>>>>>> Campbell >>>> >>>>>>> >>>> >>>>>>> On Wed, Jun 21, 2017 at 10:51 AM, Martin Sivak <[email protected]> >>>> >>>>>>> wrote: >>>> >>>>>>>> Hi, >>>> >>>>>>>> >>>> >>>>>>>> you do not have to install it on all hosts. But you should have >>>> >>>>>>>> more >>>> >>>>>>>> than one and ideally all hosted engine enabled nodes should >>>> >>>>>>>> belong to >>>> >>>>>>>> the same engine cluster. >>>> >>>>>>>> >>>> >>>>>>>> Best regards >>>> >>>>>>>> >>>> >>>>>>>> Martin Sivak >>>> >>>>>>>> >>>> >>>>>>>> On Wed, Jun 21, 2017 at 11:29 AM, cmc <[email protected]> wrote: >>>> >>>>>>>>> Hi Jenny, >>>> >>>>>>>>> >>>> >>>>>>>>> Does ovirt-hosted-engine-ha need to be installed across all >>>> >>>>>>>>> hosts? >>>> >>>>>>>>> Could that be the reason it is failing to see it properly? >>>> >>>>>>>>> >>>> >>>>>>>>> Thanks, >>>> >>>>>>>>> >>>> >>>>>>>>> Cam >>>> >>>>>>>>> >>>> >>>>>>>>> On Mon, Jun 19, 2017 at 1:27 PM, cmc <[email protected]> wrote: >>>> >>>>>>>>>> Hi Jenny, >>>> >>>>>>>>>> >>>> >>>>>>>>>> Logs are attached. I can see errors in there, but am unsure how >>>> >>>>>>>>>> they >>>> >>>>>>>>>> arose. >>>> >>>>>>>>>> >>>> >>>>>>>>>> Thanks, >>>> >>>>>>>>>> >>>> >>>>>>>>>> Campbell >>>> >>>>>>>>>> >>>> >>>>>>>>>> On Mon, Jun 19, 2017 at 12:29 PM, Evgenia Tokar >>>> >>>>>>>>>> <[email protected]> >>>> >>>>>>>>>> wrote: >>>> >>>>>>>>>>> From the output it looks like the agent is down, try starting >>>> >>>>>>>>>>> it by >>>> >>>>>>>>>>> running: >>>> >>>>>>>>>>> systemctl start ovirt-ha-agent. >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> The engine is supposed to see the hosted engine storage domain >>>> >>>>>>>>>>> and >>>> >>>>>>>>>>> import it >>>> >>>>>>>>>>> to the system, then it should import the hosted engine vm. >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> Can you attach the agent log from the host >>>> >>>>>>>>>>> (/var/log/ovirt-hosted-engine-ha/agent.log) >>>> >>>>>>>>>>> and the engine log from the engine vm >>>> >>>>>>>>>>> (/var/log/ovirt-engine/engine.log)? >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> Thanks, >>>> >>>>>>>>>>> Jenny >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> On Mon, Jun 19, 2017 at 12:41 PM, cmc <[email protected]> >>>> >>>>>>>>>>> wrote: >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> Hi Jenny, >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>>> What version are you running? >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> 4.1.2.2-1.el7.centos >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>>> For the hosted engine vm to be imported and displayed in the >>>> >>>>>>>>>>>>> engine, you >>>> >>>>>>>>>>>>> must first create a master storage domain. >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> To provide a bit more detail: this was a migration of a >>>> >>>>>>>>>>>> bare-metal >>>> >>>>>>>>>>>> engine in an existing cluster to a hosted engine VM for that >>>> >>>>>>>>>>>> cluster. >>>> >>>>>>>>>>>> As part of this migration, I built an entirely new host and >>>> >>>>>>>>>>>> ran >>>> >>>>>>>>>>>> 'hosted-engine --deploy' (followed these instructions: >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> http://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_Metal_to_an_EL-Based_Self-Hosted_Environment/). >>>> >>>>>>>>>>>> I restored the backup from the engine and it completed >>>> >>>>>>>>>>>> without any >>>> >>>>>>>>>>>> errors. I didn't see any instructions regarding a master >>>> >>>>>>>>>>>> storage >>>> >>>>>>>>>>>> domain in the page above. The cluster has two existing master >>>> >>>>>>>>>>>> storage >>>> >>>>>>>>>>>> domains, one is fibre channel, which is up, and one ISO >>>> >>>>>>>>>>>> domain, >>>> >>>>>>>>>>>> which >>>> >>>>>>>>>>>> is currently offline. >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>>> What do you mean the hosted engine commands are failing? >>>> >>>>>>>>>>>>> What >>>> >>>>>>>>>>>>> happens >>>> >>>>>>>>>>>>> when >>>> >>>>>>>>>>>>> you run hosted-engine --vm-status now? >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> Interestingly, whereas when I ran it before, it exited with >>>> >>>>>>>>>>>> no >>>> >>>>>>>>>>>> output >>>> >>>>>>>>>>>> and a return code of '1', it now reports: >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> --== Host 1 status ==-- >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> conf_on_shared_storage : True >>>> >>>>>>>>>>>> Status up-to-date : False >>>> >>>>>>>>>>>> Hostname : >>>> >>>>>>>>>>>> kvm-ldn-03.ldn.fscfc.co.uk >>>> >>>>>>>>>>>> Host ID : 1 >>>> >>>>>>>>>>>> Engine status : unknown stale-data >>>> >>>>>>>>>>>> Score : 0 >>>> >>>>>>>>>>>> stopped : True >>>> >>>>>>>>>>>> Local maintenance : False >>>> >>>>>>>>>>>> crc32 : 0217f07b >>>> >>>>>>>>>>>> local_conf_timestamp : 2911 >>>> >>>>>>>>>>>> Host timestamp : 2897 >>>> >>>>>>>>>>>> Extra metadata (valid at timestamp): >>>> >>>>>>>>>>>> metadata_parse_version=1 >>>> >>>>>>>>>>>> metadata_feature_version=1 >>>> >>>>>>>>>>>> timestamp=2897 (Thu Jun 15 16:22:54 2017) >>>> >>>>>>>>>>>> host-id=1 >>>> >>>>>>>>>>>> score=0 >>>> >>>>>>>>>>>> vm_conf_refresh_time=2911 (Thu Jun 15 16:23:08 2017) >>>> >>>>>>>>>>>> conf_on_shared_storage=True >>>> >>>>>>>>>>>> maintenance=False >>>> >>>>>>>>>>>> state=AgentStopped >>>> >>>>>>>>>>>> stopped=True >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> Yet I can login to the web GUI fine. I guess it is not HA due >>>> >>>>>>>>>>>> to >>>> >>>>>>>>>>>> being >>>> >>>>>>>>>>>> in an unknown state currently? Does the hosted-engine-ha rpm >>>> >>>>>>>>>>>> need >>>> >>>>>>>>>>>> to >>>> >>>>>>>>>>>> be installed across all nodes in the cluster, btw? >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> Thanks for the help, >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>> Cam >>>> >>>>>>>>>>>> >>>> >>>>>>>>>>>>> >>>> >>>>>>>>>>>>> Jenny Tokar >>>> >>>>>>>>>>>>> >>>> >>>>>>>>>>>>> >>>> >>>>>>>>>>>>> On Thu, Jun 15, 2017 at 6:32 PM, cmc <[email protected]> >>>> >>>>>>>>>>>>> wrote: >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> Hi, >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> I've migrated from a bare-metal engine to a hosted engine. >>>> >>>>>>>>>>>>>> There >>>> >>>>>>>>>>>>>> were >>>> >>>>>>>>>>>>>> no errors during the install, however, the hosted engine >>>> >>>>>>>>>>>>>> did not >>>> >>>>>>>>>>>>>> get >>>> >>>>>>>>>>>>>> started. I tried running: >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> hosted-engine --status >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> on the host I deployed it on, and it returns nothing (exit >>>> >>>>>>>>>>>>>> code >>>> >>>>>>>>>>>>>> is 1 >>>> >>>>>>>>>>>>>> however). I could not ping it either. So I tried starting >>>> >>>>>>>>>>>>>> it via >>>> >>>>>>>>>>>>>> 'hosted-engine --vm-start' and it returned: >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> Virtual machine does not exist >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> But it then became available. I logged into it >>>> >>>>>>>>>>>>>> successfully. It >>>> >>>>>>>>>>>>>> is not >>>> >>>>>>>>>>>>>> in the list of VMs however. >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> Any ideas why the hosted-engine commands fail, and why it >>>> >>>>>>>>>>>>>> is not >>>> >>>>>>>>>>>>>> in >>>> >>>>>>>>>>>>>> the list of virtual machines? >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> Thanks for any help, >>>> >>>>>>>>>>>>>> >>>> >>>>>>>>>>>>>> Cam >>>> >>>>>>>>>>>>>> _______________________________________________ >>>> >>>>>>>>>>>>>> Users mailing list >>>> >>>>>>>>>>>>>> [email protected] >>>> >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>>>>>>>>>>> >>>> >>>>>>>>>>>>> >>>> >>>>>>>>>>> >>>> >>>>>>>>>>> >>>> >>>>>>>>> _______________________________________________ >>>> >>>>>>>>> Users mailing list >>>> >>>>>>>>> [email protected] >>>> >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>>>> _______________________________________________ >>>> >>>>>> Users mailing list >>>> >>>>>> [email protected] >>>> >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>>> >>>> >>>>> >>>> > _______________________________________________ >>>> > Users mailing list >>>> > [email protected] >>>> > http://lists.ovirt.org/mailman/listinfo/users >>>> > >>>> > >>>> >>> _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
