On Thu, Oct 5, 2017 at 10:15 AM, Fabrice Bacchella < [email protected]> wrote:
> I have HP blades too (ProLiant BL460c Gen9). I have set the fencing to > ilo4 and everything works fine. > > Nothing special on the ilo side, just up to date firmware. > > Also these blades are BL460c Gen9 I'm not the admin of fw of blades, but I can see that the blades have version 2.53 for firmware and version 1.0.9 for their power mgmt controller. And the enclosures have fw with version 4.60 Did you create a special user for the iLO fencing of the servers (in my case fenceuser)? If so, which kind of privileges did you assign to this user? I also see that the IPMI settings seem ok: IPMI/DCMI over LAN Access is enabled IPMI/DCMI over LAN Port is the default 623 one but fence_ilo4 -a ilo_ip -l fenceuser -S /usr/local/bin/my_fence_script.sh -o status Failed: Unable to obtain correct plug status or plug is not available Even if I try -4 and/or -P and/or -L operator and/or -A password I get the same error
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
