On Thu, Oct 5, 2017 at 1:58 PM, Martin Perina <[email protected]> wrote:
> > > On Thu, Oct 5, 2017 at 11:38 AM, Gianluca Cecchi < > [email protected]> wrote: > >> On Thu, Oct 5, 2017 at 11:04 AM, Martin Perina <[email protected]> >> wrote: >> >>> >>> >>> >>> Please take a look at man page of fence_ilo_ssh and scroll down to >>> STDIN PARAMETERS section. These parameters needs to be used in Options >>> field in webadmin >>> >>> >> >> It seems on ovirt node the man pages are missing, probably to cut off >> installation base.. ;-) >> > > Unfortunately you are right, space saving :-( > > > >> Anyway I would check installing the ordinary rpm package on a base CentOS >> 7 system. >> In the mean time I have checked the STDIN PARAMETERS section of >> fence_ilo4 man page for a CentOS 6.7 clustersuite server I have at hand, >> thanks. I think it should be similar >> > > They should be more or less the same ... > > > >> >> >> >>>> All in all do you think it is the best agent for ilo4 based blades? >>>> >>> >>> Yes, according to our knowledge ilo4 should be used for all new HP >>> servers (and also ilo4 agent has most of default parameters, so if you >>> don't have some special configuration on your server you should be fine. >>> >>> >>> >>>> I have made some test with fence_ilo4 but unable to get success... what >>>> should I enable on ilo web administration page in this case, if you think >>>> the agent would be better for any reason? >>>> >>> >>> If you are using admin user, then the default should be fine. If you >>> are want to create a special user just for oVirt PM operations then >>> following permissions needs to be assigned to user within iLO4 >>> configuration: >>> >>> Virtual power and reset >>> Remote Console Access >>> Virtual Media >>> >>> And you need to add following into Options for the host PM settings: >>> >>> privlvl=operator >>> >>> >>> Thanks >>> >>> Martin >>> >>> >> Perfect: it works. >> Assigned the three privileges to the fenceuser user and now the >> corresponding command line works >> >> # fence_ilo4 -a ilo_ip -l fenceuser -L operator -S >> /usr/local/bin/my_fence_script.sh -o status >> Status: ON >> # >> >> And also from gui the test is ok using ilo4 type and >> "privlvl=operator,inet4_only=1" option >> > > Great to hear! > > > >> >> BTW: for the fence_ilo_ssh agent it is enough to have only the "Virtual >> power and reset" privilege for the dedicated user (at least to get the >> status of the blade) >> > That's right, but engine will fail to restart the server in case it is not responding if not all 3 are set .... > > Thanks for info! > > Martin > > > >> >> Thanks again, >> Gianluca >> >> >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
