Hrm, not sure what i am doing wrong then, does not seem to be working for me. I am not using the hosted engine, but a direct install on a physical server. I thought i have enabled support for libgfapi with this command:
# engine-config -g LibgfApiSupported LibgfApiSupported: false version: 3.6 LibgfApiSupported: false version: 4.0 LibgfApiSupported: true version: 4.1 restarted the engine, shutdown the vm completely and started it back up a short time later. I am using this command to check: ps ax | grep qemu | grep 'file=gluster\|file=/rhev' Output is file=gluster://10.20.102.181/gl-vm12/.... Thanks Bryan -----Original Message----- From: Kasturi Narra <kna...@redhat.com> To: Bryan Sockel <bryan.soc...@altn.com> Cc: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>, users <users@ovirt.org> Date: Tue, 14 Nov 2017 12:56:49 +0530 Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2 yes, it does work with 4.1.7.6 version On Tue, Nov 14, 2017 at 4:49 AM, Bryan Sockel <bryan.soc...@altn.com> wrote: Is libgfapi supposed to be working in 4.1.7.6? Bryan -----Original Message----- From: Alessandro De Salvo <alessandro.desa...@roma1.infn.it> To: users@ovirt.org Date: Thu, 9 Nov 2017 09:35:01 +0100 Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2 Hi again, OK, tried to stop all the vms, except the engine, set engine-config -s LibgfApiSupported=true (for 4.2 only) and restarted the engine. When I tried restarting the VMs they are still not using gfapi, so it does not seem to help. Cheers, Alessandro Il 09/11/17 09:12, Alessandro De Salvo ha scritto: Hi, where should I enable gfapi via the UI? The only command I tried was engine-config -s LibgfApiSupported=true but the result is what is shown in my output below, so it’s set to true for v4.2. Is it enough? I’ll try restarting the engine. Is it really needed to stop all the VMs and restart them all? Of course this is a test setup and I can do it, but for production clusters in the future it may be a problem. Thanks, Alessandro Il giorno 09 nov 2017, alle ore 07:23, Kasturi Narra <kna...@redhat.com> ha scritto: Hi , The procedure to enable gfapi is below. 1) stop all the vms running 2) Enable gfapi via UI or using engine-config command 3) Restart ovirt-engine service 4) start the vms. Hope you have not missed any !! Thanks kasturi On Wed, Nov 8, 2017 at 11:58 PM, Alessandro De Salvo <alessandro.desa...@roma1.infn.it> wrote: Hi, I'm using the latest 4.2 beta release and want to try the gfapi access, but I'm currently failing to use it. My test setup has an external glusterfs cluster v3.12, not managed by oVirt. The compatibility flag is correctly showing gfapi should be enabled with 4.2: # engine-config -g LibgfApiSupported LibgfApiSupported: false version: 3.6 LibgfApiSupported: false version: 4.0 LibgfApiSupported: false version: 4.1 LibgfApiSupported: true version: 4.2 The data center and cluster have the 4.2 compatibility flags as well. However, when starting a VM with a disk on gluster I can still see the disk is mounted via fuse. Any clue of what I'm still missing? Thanks, Alessandro _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users