I know, have been using Linux since 2000 and redoing the network isn't difficult, but in this case something didn't work well. Right now I'm stuck with a degraded Gluster setup after the reinstallation for which I have posted another thread.
On Wed, Nov 15, 2017 at 1:58 PM, Petr Horacek <phora...@redhat.com> wrote: > Manual change of ifcfg files and restart of network service (not reboot) > should restore connectivity. Then you should be able to access Engine and > setup the new network there so it will be persisted and recognized by oVirt. > > Glad you managed to run it. > > > 2017-11-15 13:45 GMT+02:00 Rudi Ahlers <rudiahl...@gmail.com>: > >> Hi Petr, >> >> Thanx for getting back to me. >> >> I ended up reinstalling the server. Even after I manually edited the >> ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well. >> The gateway was never added (even though it was listed in the files) and >> the /etc/resolv.conf file kept on being overwritten despite NetworkManager >> being off. >> >> On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phora...@redhat.com> >> wrote: >> >>> Hello, >>> >>> could you please share your current configuration from >>> /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_STOR >>> AGE_IFACE,DESIRED_MGMT_IFACE}? >>> >>> Thanks, >>> Petr >>> >>> 2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahl...@gmail.com>: >>> >>>> Hi, >>>> >>>> Can someone please help me "move" the network bridge to another port? I >>>> have tried a couple times but it doesn't seem to work. >>>> Our internal LAN IP range is 192.168.102.0/24 and the storage area >>>> network is 10.10.10.0/24 >>>> >>>> When I installed hosted-engine, I accidently told it to use the >>>> 10.10.10.81 interface and a bridge was created accordingly. But I cannot >>>> access the 10.10.10.0/24 IP range via our VPN (for security reasons) >>>> so I can't access the hosted-engine >>>> >>>> I tried to remove the bridge interface with brctl but it didn't work as >>>> expected. >>>> >>>> root@virt1 ~]# brctl show >>>> bridge name bridge id STP enabled interfaces >>>> ;vdsmdummy; 8000.000000000000 no >>>> ovirtmgmt 8000.0cc47aeaffd8 no ens2f0 >>>> >>>> >>>> Even though I tried to remove ens2f0 and added ens2f3, it never worked. >>>> The bridge / network would stop working and I wold need to login to the >>>> server's IPMI card and remove ens2f0. >>>> >>>> Can someone please guide me in moving the bridge to the >>>> 192.168.102.0/24 network? >>>> >>>> >>>> >>>> -- >>>> Kind Regards >>>> Rudi Ahlers >>>> Website: http://www.rudiahlers.co.za >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> >> >> -- >> Kind Regards >> Rudi Ahlers >> Website: http://www.rudiahlers.co.za >> > > -- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users