On Tue, 2017-11-21 at 09:00 +0200, Edward Haas wrote:
> On Tue, Nov 21, 2017 at 1:24 AM, Edward Clay <edward.c...@uk2group.co
> m> wrote:
> > Hello,
> > 
> > We have an issue where hosts are configured with the public facing
> > nework interface as the ovirtmgmt network and it's default route is
> > added to a ovirt created table but not to the main routing
> > table.  From my searching I've found this snippet from https://www.
> > ovirt.org/develop/release-management/features/network/multiple-
> > gateways/ which seems to explain why I can't ping anything or
> > communicate with any other system needing a default route.
> 
> By default, the default route is set on the ovirtmgmt network (the
> default one, defined on the interface/ip which you added the host to
> Engine).
> Do you have a different network set up which you will like to set the
> default route on?
> 
>  
> > "And finally, here's the host's main routing table. Any traffic
> > coming in to the host will use the ip rules and an interface's
> > routing table. The main routing table is only used for traffic
> > originating from the host."
> > 
> > I'm seeing the following main and custom ovirt created tables.
> > 
> > main:
> > # ip route show table main
> > 10.0.0.0/8 via 10.4.16.1 dev enp3s0.106 
> > 10.4.16.0/24 dev enp3s0.106 proto kernel scope link src 10.4.16.15 
> > 1.1.1.0/24 dev PUBLICB proto kernel scope link src
> > 1.1.1.1 169.254.0.0/16 dev enp6s0 scope link metric 1002 
> > 169.254.0.0/16 dev enp3s0 scope link metric 1003 
> > 169.254.0.0/16 dev enp7s0 scope link metric 1004 
> > 169.254.0.0/16 dev enp3s0.106 scope link metric 1020 
> > 169.254.0.0/16 dev PRIVATE scope link metric 1022 
> > 169.254.0.0/16 dev PUBLIC scope link metric 1024 
> > 
> > table 1138027711
> > # ip route show table 1138027711
> > default via 1.1.1.1 dev PUBLIC
> > 1.1.1.0/24 via 1.1.1.1 dev PUBLIC
> > 
> > If I manually execute the following command to add the default
> > route as well to the main table I can ping ouside of the local
> > network.
> > 
> > ip route add 0.0.0.0/0 via 1.1.1.1 dev PUBLIC
> > 
> > If I attempt to modify the /etc/sysconfig/network-scripts/route-
> > PUBLIC ad reboot the server ad one would think this file is
> > recreated by vdsm on boot.
> > 
> > What I'm looking for is the correct way to setup a default gateway
> > for the main routing table so the hosts can get OS updates and
> > communicate with the outside world.
> 
> Providing the output from "ip addr" may help clear up some things.
> It looks like you have on the host the default route set as 10.4.16.1
> (on enp3s0.106), could you elaborate what this interface is?

We have setup vlan taging to utilize the 2 internetal network
interfaces (originally enp6s0 and enp7s0) to be configured with
mulitiple networks each.  We eventually added 10Gb nics to all servers
to improve san glusterfs performance which is enp3s0 which replaced
enp6s0 in our setup.
enp3s0.106 = ovirtmgmt network access to private internal networks
onlyenp3s0.206 = private network bridge PRIVATE used for private
internal network access for VMsenp7s0.606 = is used for public access
for both VMs (bridge) and each host/cp/san in our ovirt setup named
PUBLIC
# ip addr show1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
state UNKNOWN qlen 1    link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00    inet 127.0.0.1/8 scope host lo       valid_lft
forever preferred_lft forever    inet6 ::1/128 scope
host        valid_lft forever preferred_lft forever2: enp6s0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000    link/ether 00:25:90:38:d6:2c brd
ff:ff:ff:ff:ff:ff    inet6 fe80::225:90ff:fe38:d62c/64 scope
link        valid_lft forever preferred_lft forever3: enp3s0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff    inet6
fe80::92e2:baff:fe1d:a400/64 scope link        valid_lft forever
preferred_lft forever4: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu
1500 qdisc pfifo_fast state UP qlen 1000    link/ether
00:25:90:38:d6:2d brd ff:ff:ff:ff:ff:ff20: enp3s0.106@enp3s0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen
1000    link/ether 90:e2:ba:1d:a4:00 brd ff:ff:ff:ff:ff:ff    inet
10.4.16.15/24 brd 10.4.16.255 scope global enp3s0.106       valid_lft
forever preferred_lft forever21: enp3s0.206@enp3s0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
PRIVATEB state UP qlen 1000    link/ether 90:e2:ba:1d:a4:00 brd
ff:ff:ff:ff:ff:ff22: PRIVATE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu
1500 qdisc noqueue state UP qlen 1000    link/ether 90:e2:ba:1d:a4:00
brd ff:ff:ff:ff:ff:ff23: enp7s0.606@enp7s0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master PUBLICB
state UP qlen 1000    link/ether 00:25:90:38:d6:2d brd
ff:ff:ff:ff:ff:ff24: PUBLIC: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UP qlen 1000    link/ether 00:25:90:38:d6:2d brd
ff:ff:ff:ff:ff:ff    inet 1.1.1.10/24 brd 1.1.1.255 scope global
PUBLICB       valid_lft forever preferred_lft forever25: ;vdsmdummy;:
<BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000    link/ether 0e:32:93:dd:a4:55 brd ff:ff:ff:ff:ff:ff

So all this being said I just need to reconfigure things in a way that
the PUBLIC interface has a default route in the main routing
table.  Otherwise all ovirt host are unable to communicate with the
outside world until I manually add a default route to 1.1.1.1 via the
PUBLIC interface.  Is that possible.
> Thanks,
> Edy.
> 
> > _______________________________________________
> > 
> > Users mailing list
> > 
> > Users@ovirt.org
> > 
> > http://lists.ovirt.org/mailman/listinfo/users
> > 
> > 
-- 
Edward Clay
Systems Adminstrator
UK2 Group -- US Operations 
Phone: 1-800-222-2165
E-Mail: edward.c...@uk2group.com
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to