Hi staff, Installing a fresh ovirt - CentOS 7.5.1804 up to date, ovirt version : # rpm -qa | grep ovirt ovirt-hosted-engine-ha-2.2.11-1.el7.centos.noarch ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch ovirt-host-dependencies-4.2.2-2.el7.centos.x86_64 ovirt-vmconsole-1.0.5-4.el7.centos.noarch ovirt-provider-ovn-driver-1.2.10-1.el7.centos.noarch ovirt-hosted-engine-setup-2.2.20-1.el7.centos.noarch ovirt-engine-appliance-4.2-20180504.1.el7.centos.noarch python-ovirt-engine-sdk4-4.2.6-2.el7.centos.x86_64 ovirt-host-deploy-1.7.3-1.el7.centos.noarch ovirt-release42-4.2.3.1-1.el7.noarch ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch cockpit-ovirt-dashboard-0.11.24-1.el7.centos.noarch ovirt-setup-lib-1.1.4-1.el7.centos.noarch ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch ovirt-host-4.2.2-2.el7.centos.x86_64 ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch
ON PHYSICAL SERVERS (not on VMware, why should I be ?? ;) I got exactly the same error : [ INFO ] TASK [Get local VM IP] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:69:3a:c6 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.073313", "end": "2018-06-25 16:11:36.025277", "rc": 0, "start": "2018-06-25 16:11:35.951964", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up I have 4 NIC : em1 10.0.0.230/8 is for ovirmgmt, it have the gateway em2 10.0.0.229/8 is for a vmnetwork em3+em4 in bond0 192.168.0.30 are for gluster with jumbo frames, volumes (ENGINE, ISO,EXPORT,DATA) are up and operationals. I tried to stop em2 (ONBOOT=No and restart network), so the network is actually : # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether e0:db:55:15:eb:70 brd ff:ff:ff:ff:ff:ff inet 10.0.0.230/8 brd 10.255.255.255 scope global em1 valid_lft forever preferred_lft forever inet6 fe80::e2db:55ff:fe15:eb70/64 scope link valid_lft forever preferred_lft forever 3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether e0:db:55:15:eb:71 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP group default qlen 1000 link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP group default qlen 1000 link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP group default qlen 1000 link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff inet 192.168.0.30/24 brd 192.168.0.255 scope global bond0 valid_lft forever preferred_lft forever inet6 fe80::e2db:55ff:fe15:eb72/64 scope link valid_lft forever preferred_lft forever # ip r default via 10.0.1.254 dev em1 10.0.0.0/8 dev em1 proto kernel scope link src 10.0.0.230 169.254.0.0/16 dev em1 scope link metric 1002 169.254.0.0/16 dev bond0 scope link metric 1006 192.168.0.0/24 dev bond0 proto kernel scope link src 192.168.0.30 but same issue, after "/usr/sbin/ovirt-hosted-engine-cleanup" and restarting the deployment. NetworkManager was stopped and disabled at the node install, and it is still stopped.After the error, the network shows this after device 6 (bond0) : 7: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:38:e0:5a brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 8: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000 link/ether 52:54:00:38:e0:5a brd ff:ff:ff:ff:ff:ff 11: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master virbr0 state UNKNOWN group default qlen 1000 link/ether fe:16:3e:69:3a:c6 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe69:3ac6/64 scope link valid_lft forever preferred_lft forever I do not see ovirmgmt... And I don't know if I can access the engine vm as I have not its IP :( I tried to ping addresses after 192.168.122.1, but no one are accessible so I stopped at 122.10. The VM seems up (kvm process), qemu-kvm process taking 150% of cpu in "top"... I pasted the log here : https://pastebin.com/Ebzh1uEh PLEASE ! This issue seems to be reccurent since the beginning of 2018 (see messages here on list ! Jamie Lawrence in February, supo...@logicworks.pt in april, shamil...@gmail.com and Yaniv Kaul in May, florentl on june 01...). Can anyone give us a way to solve this ? -- Cordialement, Frank Soyer Le Lundi, Juin 04, 2018 16:07 CEST, Simone Tiraboschi <stira...@redhat.com> a écrit: On Mon, Jun 4, 2018 at 2:20 PM, Phillip Bailey <phbai...@redhat.com> wrote:Hi Florent, Could you please provide the log for the stage in which the wizard is failing? Logs can be found in /var/log/ovirt-hosted-engine-setup. Thanks! -Phillip Bailey On Fri, Jun 1, 2018 at 7:57 AM, florentl <florentl.i...@laposte.net> wrote:Hi all, I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518. Every times I get stuck on : [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} I tried with static IP Address and with DHCP but both failed. To be more specific, I installed three nodes, deployed glusterfs with the wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi Hypervisor). Unfortunately I think that the issue is trying to run a nested env over ESXi.AFAIk nesting KVM VMs over ESX is still problematic. I'd suggest to repeat the experiment nesting over KVM on L0. My node IP is : 192.168.176.40 / and I want the hosted-engine vm has 192.168.176.43. Thanks, Florent _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F3BNUQ2T434EASIX56F7KQQJVF7OCDUM/ _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RU34XDM2W6GPDCRRGWORBTPH2BUN3CJR/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FSRFTRJ4IJOANILD4ZGSHNEVS3Q6SOTE/