Well,
unfortunatly, it was a "false-positive". This morning I tried again, with the 
idea that at one moment the deploy will ask for the final destination for the 
engine, I will restart bond0+gluster+volume engine at thos moment.
Re-launching the deploy on the second "fresh" host (the first one with all 
errors yesterday let it in a doutful state) with em2 and gluster+bond0 off :
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group 
default qlen 1000
    link/ether e0:db:55:15:f0:f0 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.227/8 brd 10.255.255.255 scope global em1
       valid_lft forever preferred_lft forever
    inet6 fe80::e2db:55ff:fe15:f0f0/64 scope link 
       valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f1 brd ff:ff:ff:ff:ff:ff
4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f2 brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f3 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,MASTER> mtu 9000 qdisc noqueue state DOWN group 
default qlen 1000
    link/ether 3a:ab:a2:f2:38:5c brd ff:ff:ff:ff:ff:ff

# ip r
default via 10.0.1.254 dev em1 
10.0.0.0/8 dev em1 proto kernel scope link src 10.0.0.227 
169.254.0.0/16 dev em1 scope link metric 1002 ... does NOT work this morning
[ INFO  ] TASK [Get local VM IP]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, 
"cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:01:c6:32 | awk '{ 
print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.083587", "end": "2018-06-26 
11:26:07.581706", "rc": 0, "start": "2018-06-26 11:26:07.498119", "stderr": "", 
"stderr_lines": [], "stdout": "", "stdout_lines": []}I'm sure that the network 
was the same yesterday when my attempt finally pass the "get local vm ip". Why 
not today ?
After the error, the network was :
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group 
default qlen 1000
    link/ether e0:db:55:15:f0:f0 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.227/8 brd 10.255.255.255 scope global em1
       valid_lft forever preferred_lft forever
    inet6 fe80::e2db:55ff:fe15:f0f0/64 scope link 
       valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f1 brd ff:ff:ff:ff:ff:ff
4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f2 brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:f0:f3 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,MASTER> mtu 9000 qdisc noqueue state DOWN group 
default qlen 1000
    link/ether 3a:ab:a2:f2:38:5c brd ff:ff:ff:ff:ff:ff
7: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
group default qlen 1000
    link/ether 52:54:00:ae:8d:93 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
8: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 
state DOWN group default qlen 1000
    link/ether 52:54:00:ae:8d:93 brd ff:ff:ff:ff:ff:ff
9: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master 
virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:16:3e:01:c6:32 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc16:3eff:fe01:c632/64 scope link 
       valid_lft forever preferred_lft forever

# ip r
default via 10.0.1.254 dev em1 
10.0.0.0/8 dev em1 proto kernel scope link src 10.0.0.227 
169.254.0.0/16 dev em1 scope link metric 1002 
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 
 
 So, finally, I have no idea why this appends :(((


Le Mardi, Juin 26, 2018 09:21 CEST, Simone Tiraboschi <stira...@redhat.com> a 
écrit:
  On Mon, Jun 25, 2018 at 6:32 PM fsoyer <fso...@systea.fr> wrote:Well, 
answering to myself for more informations.
Thinking that the network was part of the problem, I tried to stop gluster 
volumes, stop gluster on host, and stop bond0.
So, the host now had just em1 with one IP.
And... The winner is... Yes : the install passed the "[Get local VM IP]" and 
continued !!

I hit ctrl-c, restart the bond0, restart deploy : it crashed. So it seems that 
more than one network is the problem. But ! How do I install engine on gluster 
on a separate - bonding - jumbo network in this case ???

Can you reproduce this on your side ? Can you please attach the output of 'ip 
a' in both the case? 
Frank
 

Le Lundi, Juin 25, 2018 16:50 CEST, "fsoyer" <fso...@systea.fr> a écrit:
  Hi staff,
Installing a fresh ovirt - CentOS 7.5.1804 up to date, ovirt version :
# rpm -qa | grep ovirt
ovirt-hosted-engine-ha-2.2.11-1.el7.centos.noarch
ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch
ovirt-host-dependencies-4.2.2-2.el7.centos.x86_64
ovirt-vmconsole-1.0.5-4.el7.centos.noarch
ovirt-provider-ovn-driver-1.2.10-1.el7.centos.noarch
ovirt-hosted-engine-setup-2.2.20-1.el7.centos.noarch
ovirt-engine-appliance-4.2-20180504.1.el7.centos.noarch
python-ovirt-engine-sdk4-4.2.6-2.el7.centos.x86_64
ovirt-host-deploy-1.7.3-1.el7.centos.noarch
ovirt-release42-4.2.3.1-1.el7.noarch
ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch
cockpit-ovirt-dashboard-0.11.24-1.el7.centos.noarch
ovirt-setup-lib-1.1.4-1.el7.centos.noarch
ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch
ovirt-host-4.2.2-2.el7.centos.x86_64
ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch

ON PHYSICAL SERVERS (not on VMware, why should I be ?? ;) I got exactly the 
same error :
[ INFO  ] TASK [Get local VM IP]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, 
"cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:69:3a:c6 | awk '{ 
print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.073313", "end": "2018-06-25 
16:11:36.025277", "rc": 0, "start": "2018-06-25 16:11:35.951964", "stderr": "", 
"stderr_lines": [], "stdout": "", "stdout_lines": []}
[ INFO  ] TASK [include_tasks]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [Remove local vm dir]
[ INFO  ] changed: [localhost]
[ INFO  ] TASK [Notify the user about a failure]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system 
may not be provisioned according to the playbook results: please check the logs 
for the issue, fix accordingly or re-deploy from scratch.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing 
ansible-playbook
[ INFO  ] Stage: Clean up


I have 4 NIC :
em1 10.0.0.230/8 is for ovirmgmt, it have the gateway
em2 10.0.0.229/8 is for a vmnetwork
em3+em4 in bond0 192.168.0.30 are for gluster with jumbo frames, volumes 
(ENGINE, ISO,EXPORT,DATA) are up and operationals.

I tried to stop em2 (ONBOOT=No and restart network), so the network is actually 
:
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group 
default qlen 1000
    link/ether e0:db:55:15:eb:70 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.230/8 brd 10.255.255.255 scope global em1
       valid_lft forever preferred_lft forever
    inet6 fe80::e2db:55ff:fe15:eb70/64 scope link 
       valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 
1000
    link/ether e0:db:55:15:eb:71 brd ff:ff:ff:ff:ff:ff
4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 
state UP group default qlen 1000
    link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 
state UP group default qlen 1000
    link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state 
UP group default qlen 1000
    link/ether e0:db:55:15:eb:72 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.30/24 brd 192.168.0.255 scope global bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::e2db:55ff:fe15:eb72/64 scope link 
       valid_lft forever preferred_lft forever

# ip r
default via 10.0.1.254 dev em1 
10.0.0.0/8 dev em1 proto kernel scope link src 10.0.0.230 
169.254.0.0/16 dev em1 scope link metric 1002 
169.254.0.0/16 dev bond0 scope link metric 1006 
192.168.0.0/24 dev bond0 proto kernel scope link src 192.168.0.30 

but same issue, after "/usr/sbin/ovirt-hosted-engine-cleanup" and restarting 
the deployment.
NetworkManager was stopped and disabled at the node install, and it is still 
stopped.After the error, the network shows this after device 6 (bond0) :
7: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
group default qlen 1000
    link/ether 52:54:00:38:e0:5a brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
8: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 
state DOWN group default qlen 1000
    link/ether 52:54:00:38:e0:5a brd ff:ff:ff:ff:ff:ff
11: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master 
virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:16:3e:69:3a:c6 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc16:3eff:fe69:3ac6/64 scope link 
       valid_lft forever preferred_lft forever

I do not see ovirmgmt... And I don't know if I can access the engine vm as I 
have not its IP :(
I tried to ping addresses after 192.168.122.1, but no one are accessible so I 
stopped at 122.10. The VM seems up (kvm process), qemu-kvm process taking 150% 
of cpu in "top"...

I pasted the log here : https://pastebin.com/Ebzh1uEh

PLEASE ! This issue seems to be reccurent since the beginning of 2018 (see 
messages here on list !
Jamie Lawrence in February,  supo...@logicworks.pt in april, 
shamil...@gmail.com and Yaniv Kaul in May,
florentl on june 01...). Can anyone give us a way to solve this ?
--
Cordialement,

Frank Soyer

Le Lundi, Juin 04, 2018 16:07 CEST, Simone Tiraboschi <stira...@redhat.com> a 
écrit:
   On Mon, Jun 4, 2018 at 2:20 PM, Phillip Bailey <phbai...@redhat.com> 
wrote:Hi Florent, Could you please provide the log for the stage in which the 
wizard is failing? Logs can be found in /var/log/ovirt-hosted-engine-setup. 
Thanks! -Phillip Bailey On Fri, Jun 1, 2018 at 7:57 AM, florentl 
<florentl.i...@laposte.net> wrote:Hi all,
I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518.
Every times I get stuck on :
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, 
"cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ 
print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 
11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", 
"stderr_lines": [], "stdout": "", "stdout_lines": []}
I tried with static IP Address and with DHCP but both failed.

To be more specific, I installed three nodes, deployed glusterfs with the 
wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi 
Hypervisor). Unfortunately I think that the issue is trying to run a nested env 
over ESXi.AFAIk nesting KVM VMs over ESX is still problematic. I'd suggest to 
repeat the experiment nesting over KVM on L0.  My node IP is : 192.168.176.40 / 
and I want the hosted-engine vm has 192.168.176.43.

Thanks,
Florent
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/F3BNUQ2T434EASIX56F7KQQJVF7OCDUM/
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RU34XDM2W6GPDCRRGWORBTPH2BUN3CJR/
 
 
 


_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7GELBK2W6GLGZYFRRRHELFM4BWF5MBSO/

Reply via email to