This happened to me too. The NIC doesn't come "up" on the first boot, even though it was initiated during the setup. DHCP or static makes no difference to this situation. iirc I used nmtui to bring the interface up and verify the hostname. Can't do it in cockpit without the interface being up...
Once you're in the engine you can initialize and add the rest of the required nics. I'm not sure if this is as designed or a bug, but it last happened to me on 4.2.5, and was the same process on my 3 hosts. On Sun, Dec 9, 2018 at 12:14 AM Eitan Raviv <[email protected]> wrote: > On Thu, Dec 6, 2018 at 7:10 PM Stefan Wolf <[email protected]> wrote: > > > > Hello, > > > > > > > > I ve downloaded an installed OVIRT NODE 4.2.7.1. > > > > During the installation I ‘ve setup a static ip (I ‘ve also tried dhcp, > both work) > > > > how did you setup the static ip? did you use Cockpit? > > > > The installation passes and after the reboot ovirt node starts without > any problems. > > > > BUT the network is not configured. > > what do you mean by 'network is not configured'? the static IP is not > assigned to your selected NIC or sth else? > > > > > > I know > https://www.ovirt.org/documentation/install-guide/chap-oVirt_Nodes/ and > I know > > > > https://www.ovirt.org/documentation/admin-guide/chap-Hosts/ > > > > > > > > and now I am between these two documents > > > > oVirt is installed but network is not configured to add it to datacenter > > > > > > > > of course I know the scripts under /etc/sysconfig/network-scripts > > > > do I really have do edit it manuel? > > > > > > > > if I change ip in command line > > > > ip a add … dev.. > > > > and ip route add … > > > > it fails to add node to datacenter > > > > > > > > - with one of the last version I ‘ve added the IP address in bash > > > > - added the host to datacenter, > > > > - after reboot readd the ip address in bash after reboot > > > > - an then I could change network settings in oVirt Manger > > > > > > > > What is best practices for adding a node to datacenter when the ip > address is not assigned after installation > > > > > > > > Thx shb > > > > _______________________________________________ > > Users mailing list -- [email protected] > > To unsubscribe send an email to [email protected] > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > https://lists.ovirt.org/archives/list/[email protected]/message/TH5MRXJUU4SI62Z5XXQX2S6GKBOQIJWW/ > _______________________________________________ > Users mailing list -- [email protected] > To unsubscribe send an email to [email protected] > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/[email protected]/message/PULDN5JRT6PZYVCPHQDIRVLVKIASXNAT/ >
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/LZQ4AZ752B5LTTTAOY2YM65S2GJKQFJM/
