Hi, "This enable host-side streaming, are you sure you want it?" Not sure yet, but i would at least disable compression, video playing seems to be pretty poor, and crackling ( youtube, etc )
"AFAIK, if virsh edit exits without issue, you need to shutdown the vm and then start it again" I did that, and when the vm comes back on, my changes are not there anymore .... On Mon, Feb 11, 2019 at 10:45 AM Victor Toso <victort...@redhat.com> wrote: > Hi, > > On Sun, Feb 10, 2019 at 02:08:48PM +0200, Leo David wrote: > > Hi, > > > > I am trying to disable video compression as per this thread: > > https://lists.ovirt.org/pipermail/users/2017-January/078753.html > > > > The thing is that I just can't figure out where to place the following: > > > > <graphics type='spice' autoport='yes'> > > <listen type='address'/> > > <image compression='off'/> > > <streaming mode='filter'/> > > This enable host-side streaming, are you sure you want it? > > > </graphics> > > > > If I attempt to edit vm properties by using virsh and add these > > custom settings, the configuration file gets overwritten once > > the vm reboots. > > AFAIK, if virsh edit exits without issue, you need to shutdown > the vm and then start it again. Reboot is not enough. > > > Any suggestions? > > > > Thank you, > > > > Leo > > > > > > > > > > On Wed, Feb 6, 2019 at 7:17 PM Leo David <leoa...@gmail.com> wrote: > > > > > Hello everyone, > > > Any chance that this issue to be already fixed in the new 4.3 version ? > > > Thank you ! > > > > > > On Tue, Jan 8, 2019, 12:25 Victor Toso <victort...@redhat.com wrote: > > > > > >> Hi, > > >> > > >> On Tue, Jan 08, 2019 at 12:08:31PM +0200, Leo David wrote: > > >> > Thank you very mucjh, and sorry for being so lazy to search > > >> > for that rpm by myself. Somehow, fedora rpms missed from my > > >> > mind. Oh boy, it requires a lot of packages. Do you think > > >> > would it be a good idea to temporarily install fedora repos, do > > >> > the yum installation to get the dependencoes too and then > > >> > disable the repo ? I am thinking to not break the ovirt node > > >> > installation. > > >> > > >> The easiest path is to get the source from your current rpm, > > >> apply the patch mentioned in previous email, build, install, > > >> test. > > >> > > >> If that does not work you can rollback. If works, you can rethink > > >> what is best. > > >> > > >> Cheers, > > >> > > >> > yum localinstall spice-server-0.14.1-1.fc30.x86_64.rpm > > >> > Loaded plugins: enabled_repos_upload, fastestmirror, > imgbased-persist, > > >> > package_upload, product-id, search-disabled-repos, > subscription-manager, > > >> > vdsmupgrade > > >> > This system is not registered with an entitlement server. You can > use > > >> > subscription-manager to register. > > >> > Examining spice-server-0.14.1-1.fc30.x86_64.rpm: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > Marking spice-server-0.14.1-1.fc30.x86_64.rpm as an update to > > >> > spice-server-0.14.0-2.el7_5.3.x86_64 > > >> > Resolving Dependencies > > >> > --> Running transaction check > > >> > ---> Package spice-server.x86_64 0:0.14.0-2.el7_5.3 will be updated > > >> > ---> Package spice-server.x86_64 0:0.14.1-1.fc30 will be an update > > >> > --> Processing Dependency: libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) > for > > >> > package: spice-server-0.14.1-1.fc30.x86_64 > > >> > Loading mirror speeds from cached hostfile > > >> > * epel: ftp.nluug.nl > > >> > * ovirt-4.2-epel: ftp.nluug.nl > > >> > --> Processing Dependency: libssl.so.1.1(OPENSSL_1_1_0)(64bit) for > > >> package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libcrypto.so.1.1()(64bit) for package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libgstapp-1.0.so.0()(64bit) for package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libgstbase-1.0.so.0()(64bit) for package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libgstreamer-1.0.so.0()(64bit) for > package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libgstvideo-1.0.so.0()(64bit) for > package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: liborc-0.4.so.0()(64bit) for package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Processing Dependency: libssl.so.1.1()(64bit) for package: > > >> > spice-server-0.14.1-1.fc30.x86_64 > > >> > --> Finished Dependency Resolution > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libgstvideo-1.0.so.0()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libgstbase-1.0.so.0()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libgstreamer-1.0.so.0()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: liborc-0.4.so.0()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libcrypto.so.1.1()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libssl.so.1.1(OPENSSL_1_1_0)(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libgstapp-1.0.so.0()(64bit) > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > > >> > Requires: libssl.so.1.1()(64bit) > > >> > You could try using --skip-broken to work around the problem > > >> > You could try running: rpm -Va --nofiles --nodigest > > >> > Uploading Enabled Repositories Report > > >> > Loaded plugins: fastestmirror, product-id, subscription-manager > > >> > This system is not registered with an entitlement server. You can > use > > >> > subscription-manager to register. > > >> > Cannot upload enabled repos report, is this client registered? > > >> > > > >> > Thank you ! > > >> > > > >> > Leo > > >> > > > >> > On Tue, Jan 8, 2019 at 10:19 AM Victor Toso <victort...@redhat.com> > > >> wrote: > > >> > > > >> > > Hi, > > >> > > > > >> > > On Mon, Jan 07, 2019 at 07:29:13PM +0200, Leo David wrote: > > >> > > > Thank you very much Victor, > > >> > > > Is there a rpm that I can easily install on all the nodes, or > will > > >> I need > > >> > > > to build that version from sources ? > > >> > > > > >> > > You can fetch the release of 0.14.1 version at > > >> > > https://gitlab.freedesktop.org/spice/spice/tags > > >> > > > > >> > > You can fetch an rpm from Fedora here > > >> > > https://koji.fedoraproject.org/koji/buildinfo?buildID=1138474 > > >> > > > > >> > > Cheers, > > >> > > > > >> > > > On Mon, Jan 7, 2019, 19:14 Victor Toso <victort...@redhat.com > > >> wrote: > > >> > > > > > >> > > > > Hi, > > >> > > > > > > >> > > > > On Mon, Jan 07, 2019 at 07:00:04PM +0200, Leo David wrote: > > >> > > > > > Thank you very much ! > > >> > > > > > > > >> > > > > > I have modified > > >> > > /etc/ovirt-engine/osinfo.conf.d/00-defaults.properties > > >> > > > > file > > >> > > > > > and added the last line > > >> > > > > > > > >> > > > > > # Windows10x64 > > >> > > > > > os.windows_10x64.id.value = 27 > > >> > > > > > os.windows_10x64.name.value = Windows 10 x64 > > >> > > > > > os.windows_10x64.derivedFrom.value = windows_8x64 > > >> > > > > > os.windows_10x64.productKey.value = > > >> > > > > > os.windows_10x64.resources.maximum.ram.value = 2097152 > > >> > > > > > os.windows_10x64.cpu.unsupported.value = conroe, opteron_g1 > > >> > > > > > os.windows_10x64.sysprepPath.value = > > >> > > > > > ${ENGINE_USR}/conf/sysprep/sysprep.w10x64 > > >> > > > > > *os.windows_10x64.devices.display.vramMultiplier.value = 2* > > >> > > > > > > > >> > > > > > The vm has the "Windows10x64" profile configured > > >> > > > > > > > >> > > > > > Restarted the ovirt-engine vm, powered on the Windows 10 vm. > > >> Not any > > >> > > > > > difference...The console is very slow, almost unusable. > > >> > > > > > > > >> > > > > > Also, tried to upgrade spice-server on the node, but it > seems > > >> that > > >> > > there > > >> > > > > > aeno updates available. At the moment, it is installed: > > >> > > > > > spice-server.x86_64 > 0.14.0-2.el7_5.3 > > >> > > > > > > >> > > > > Just for reference, the patch in spice-server that should > help is > > >> > > > > from the mail thread > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > >> > https://lists.freedesktop.org/archives/spice-devel/2018-June/044237.html > > >> > > > > > > >> > > > > Merged as > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > >> > https://gitlab.freedesktop.org/spice/spice/commit/ca4984570f425e87e92abe5f62f9687bb55c1e14 > > >> > > > > > > >> > > > > Looking at the repo with git tag --contains > ca4984570f425e87e92 > > >> > > > > it shows v0.14.1. > > >> > > > > > > >> > > > > 0.14.0-2 probably does not contain that. Either update to > 0.14.1 > > >> > > > > or backport the patch. It does need to shutdown and start the > VM > > >> > > > > again. > > >> > > > > > > >> > > > > > Any thoughts ? > > >> > > > > > > > >> > > > > > Thank you ! > > >> > > > > > > >> > > > > I hope it helps ;) > > >> > > > > > > >> > > > > Cheers, > > >> > > > > > > >> > > > > >> > > > >> > > > >> > -- > > >> > Best regards, Leo David > > >> > > > > > > > -- > > Best regards, Leo David > -- Best regards, Leo David
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/H67M6NMJD4IVQJGDDKDDAMO4EFRY2DYU/
