Hi, On Fri, Feb 15, 2019 at 04:24:15PM +0200, Leo David wrote: > Hi Everyone, > Any thoughts on this ? > It seems that audio streaming is affected as well, and > bandwidth is not an issue in this case.
What audio issues do you see? > 'm thinking that maybe if I just just disable compression on > spice, things would get a bit better...maybe. > Thank you ! > > On Wed, Feb 13, 2019 at 8:05 AM Leo David <[email protected]> wrote: > > > Thank you so much Victor ! > > Anyone, any ideea how could I disable video compression for > > spice console on particular vms ? I'm not familiar with oVirt interface but it shouldn't be hard if you have access to the host. # virsh edit $vm-name switch what you have in graphics to: <graphics type='spice' autoport='yes'> <image compression='off'/> <streaming mode='off'/> </graphics> > > I am trying to implement an "almost" full desktop experience > > with an oVirt based vdi environment. > > And besides the Windows10 spice issues ( which are the main > > cause of this thread ), it seems that Windows 7 is affected > > too by the multimedia playing perspective. Which makes a > > total blocker on project implementation.... Do you have spice-guest-tools installed? > > Any suggestions/ similar experiences ? > > Thank you very much and have a nice day ! > > > > Leo Cheers, Victor > > > > On Mon, Feb 11, 2019, 12:01 Victor Toso <[email protected] wrote: > > > >> Hi, > >> > >> On Mon, Feb 11, 2019 at 11:50:49AM +0200, Leo David wrote: > >> > Hi, > >> > "This enable host-side streaming, are you sure you want it?" > >> > Not sure yet, but i would at least disable compression, video > >> > playing seems to be pretty poor, and crackling ( youtube, etc ) > >> > >> For playing video use-cases (youtube) it might be okay but not > >> for playing games as it has some hard coded delay in the > >> streaming code path. > >> > >> The streaming is mjpeg so you don't save much bandwidth either. > >> > >> > "AFAIK, if virsh edit exits without issue, you need to shutdown > >> > the vm and then start it again" > >> > I did that, and when the vm comes back on, my changes are not there > >> > anymore .... > >> > >> Might be something specific to ovirt, not sure :( > >> > >> I hope someone else can help you. > >> > >> > On Mon, Feb 11, 2019 at 10:45 AM Victor Toso <[email protected]> > >> wrote: > >> > > >> > > Hi, > >> > > > >> > > On Sun, Feb 10, 2019 at 02:08:48PM +0200, Leo David wrote: > >> > > > Hi, > >> > > > > >> > > > I am trying to disable video compression as per this thread: > >> > > > https://lists.ovirt.org/pipermail/users/2017-January/078753.html > >> > > > > >> > > > The thing is that I just can't figure out where to place the > >> following: > >> > > > > >> > > > <graphics type='spice' autoport='yes'> > >> > > > <listen type='address'/> > >> > > > <image compression='off'/> > >> > > > <streaming mode='filter'/> > >> > > > >> > > This enable host-side streaming, are you sure you want it? > >> > > > >> > > > </graphics> > >> > > > > >> > > > If I attempt to edit vm properties by using virsh and add these > >> > > > custom settings, the configuration file gets overwritten once > >> > > > the vm reboots. > >> > > > >> > > AFAIK, if virsh edit exits without issue, you need to shutdown > >> > > the vm and then start it again. Reboot is not enough. > >> > > > >> > > > Any suggestions? > >> > > > > >> > > > Thank you, > >> > > > > >> > > > Leo > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > On Wed, Feb 6, 2019 at 7:17 PM Leo David <[email protected]> wrote: > >> > > > > >> > > > > Hello everyone, > >> > > > > Any chance that this issue to be already fixed in the new 4.3 > >> version ? > >> > > > > Thank you ! > >> > > > > > >> > > > > On Tue, Jan 8, 2019, 12:25 Victor Toso <[email protected] > >> wrote: > >> > > > > > >> > > > >> Hi, > >> > > > >> > >> > > > >> On Tue, Jan 08, 2019 at 12:08:31PM +0200, Leo David wrote: > >> > > > >> > Thank you very mucjh, and sorry for being so lazy to search > >> > > > >> > for that rpm by myself. Somehow, fedora rpms missed from my > >> > > > >> > mind. Oh boy, it requires a lot of packages. Do you think > >> > > > >> > would it be a good idea to temporarily install fedora repos, do > >> > > > >> > the yum installation to get the dependencoes too and then > >> > > > >> > disable the repo ? I am thinking to not break the ovirt node > >> > > > >> > installation. > >> > > > >> > >> > > > >> The easiest path is to get the source from your current rpm, > >> > > > >> apply the patch mentioned in previous email, build, install, > >> > > > >> test. > >> > > > >> > >> > > > >> If that does not work you can rollback. If works, you can rethink > >> > > > >> what is best. > >> > > > >> > >> > > > >> Cheers, > >> > > > >> > >> > > > >> > yum localinstall spice-server-0.14.1-1.fc30.x86_64.rpm > >> > > > >> > Loaded plugins: enabled_repos_upload, fastestmirror, > >> > > imgbased-persist, > >> > > > >> > package_upload, product-id, search-disabled-repos, > >> > > subscription-manager, > >> > > > >> > vdsmupgrade > >> > > > >> > This system is not registered with an entitlement server. You > >> can > >> > > use > >> > > > >> > subscription-manager to register. > >> > > > >> > Examining spice-server-0.14.1-1.fc30.x86_64.rpm: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > Marking spice-server-0.14.1-1.fc30.x86_64.rpm as an update to > >> > > > >> > spice-server-0.14.0-2.el7_5.3.x86_64 > >> > > > >> > Resolving Dependencies > >> > > > >> > --> Running transaction check > >> > > > >> > ---> Package spice-server.x86_64 0:0.14.0-2.el7_5.3 will be > >> updated > >> > > > >> > ---> Package spice-server.x86_64 0:0.14.1-1.fc30 will be an > >> update > >> > > > >> > --> Processing Dependency: > >> libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) > >> > > for > >> > > > >> > package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > Loading mirror speeds from cached hostfile > >> > > > >> > * epel: ftp.nluug.nl > >> > > > >> > * ovirt-4.2-epel: ftp.nluug.nl > >> > > > >> > --> Processing Dependency: libssl.so.1.1(OPENSSL_1_1_0)(64bit) > >> for > >> > > > >> package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libcrypto.so.1.1()(64bit) for > >> package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libgstapp-1.0.so.0()(64bit) for > >> package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libgstbase-1.0.so.0()(64bit) for > >> package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libgstreamer-1.0.so.0()(64bit) for > >> > > package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libgstvideo-1.0.so.0()(64bit) for > >> > > package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: liborc-0.4.so.0()(64bit) for > >> package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Processing Dependency: libssl.so.1.1()(64bit) for package: > >> > > > >> > spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > --> Finished Dependency Resolution > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libgstvideo-1.0.so.0()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libgstbase-1.0.so.0()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libgstreamer-1.0.so.0()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: liborc-0.4.so.0()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libcrypto.so.1.1()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libssl.so.1.1(OPENSSL_1_1_0)(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libgstapp-1.0.so.0()(64bit) > >> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64 > >> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64) > >> > > > >> > Requires: libssl.so.1.1()(64bit) > >> > > > >> > You could try using --skip-broken to work around the problem > >> > > > >> > You could try running: rpm -Va --nofiles --nodigest > >> > > > >> > Uploading Enabled Repositories Report > >> > > > >> > Loaded plugins: fastestmirror, product-id, subscription-manager > >> > > > >> > This system is not registered with an entitlement server. You > >> can > >> > > use > >> > > > >> > subscription-manager to register. > >> > > > >> > Cannot upload enabled repos report, is this client registered? > >> > > > >> > > >> > > > >> > Thank you ! > >> > > > >> > > >> > > > >> > Leo > >> > > > >> > > >> > > > >> > On Tue, Jan 8, 2019 at 10:19 AM Victor Toso < > >> [email protected]> > >> > > > >> wrote: > >> > > > >> > > >> > > > >> > > Hi, > >> > > > >> > > > >> > > > >> > > On Mon, Jan 07, 2019 at 07:29:13PM +0200, Leo David wrote: > >> > > > >> > > > Thank you very much Victor, > >> > > > >> > > > Is there a rpm that I can easily install on all the nodes, > >> or > >> > > will > >> > > > >> I need > >> > > > >> > > > to build that version from sources ? > >> > > > >> > > > >> > > > >> > > You can fetch the release of 0.14.1 version at > >> > > > >> > > https://gitlab.freedesktop.org/spice/spice/tags > >> > > > >> > > > >> > > > >> > > You can fetch an rpm from Fedora here > >> > > > >> > > > >> https://koji.fedoraproject.org/koji/buildinfo?buildID=1138474 > >> > > > >> > > > >> > > > >> > > Cheers, > >> > > > >> > > > >> > > > >> > > > On Mon, Jan 7, 2019, 19:14 Victor Toso < > >> [email protected] > >> > > > >> wrote: > >> > > > >> > > > > >> > > > >> > > > > Hi, > >> > > > >> > > > > > >> > > > >> > > > > On Mon, Jan 07, 2019 at 07:00:04PM +0200, Leo David > >> wrote: > >> > > > >> > > > > > Thank you very much ! > >> > > > >> > > > > > > >> > > > >> > > > > > I have modified > >> > > > >> > > /etc/ovirt-engine/osinfo.conf.d/00-defaults.properties > >> > > > >> > > > > file > >> > > > >> > > > > > and added the last line > >> > > > >> > > > > > > >> > > > >> > > > > > # Windows10x64 > >> > > > >> > > > > > os.windows_10x64.id.value = 27 > >> > > > >> > > > > > os.windows_10x64.name.value = Windows 10 x64 > >> > > > >> > > > > > os.windows_10x64.derivedFrom.value = windows_8x64 > >> > > > >> > > > > > os.windows_10x64.productKey.value = > >> > > > >> > > > > > os.windows_10x64.resources.maximum.ram.value = 2097152 > >> > > > >> > > > > > os.windows_10x64.cpu.unsupported.value = conroe, > >> opteron_g1 > >> > > > >> > > > > > os.windows_10x64.sysprepPath.value = > >> > > > >> > > > > > ${ENGINE_USR}/conf/sysprep/sysprep.w10x64 > >> > > > >> > > > > > *os.windows_10x64.devices.display.vramMultiplier.value > >> = 2* > >> > > > >> > > > > > > >> > > > >> > > > > > The vm has the "Windows10x64" profile configured > >> > > > >> > > > > > > >> > > > >> > > > > > Restarted the ovirt-engine vm, powered on the Windows > >> 10 vm. > >> > > > >> Not any > >> > > > >> > > > > > difference...The console is very slow, almost unusable. > >> > > > >> > > > > > > >> > > > >> > > > > > Also, tried to upgrade spice-server on the node, but it > >> > > seems > >> > > > >> that > >> > > > >> > > there > >> > > > >> > > > > > aeno updates available. At the moment, it is installed: > >> > > > >> > > > > > spice-server.x86_64 > >> > > 0.14.0-2.el7_5.3 > >> > > > >> > > > > > >> > > > >> > > > > Just for reference, the patch in spice-server that should > >> > > help is > >> > > > >> > > > > from the mail thread > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > >> > > > >> > >> > > > >> https://lists.freedesktop.org/archives/spice-devel/2018-June/044237.html > >> > > > >> > > > > > >> > > > >> > > > > Merged as > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > >> > > > >> > >> > > > >> https://gitlab.freedesktop.org/spice/spice/commit/ca4984570f425e87e92abe5f62f9687bb55c1e14 > >> > > > >> > > > > > >> > > > >> > > > > Looking at the repo with git tag --contains > >> > > ca4984570f425e87e92 > >> > > > >> > > > > it shows v0.14.1. > >> > > > >> > > > > > >> > > > >> > > > > 0.14.0-2 probably does not contain that. Either update to > >> > > 0.14.1 > >> > > > >> > > > > or backport the patch. It does need to shutdown and > >> start the > >> > > VM > >> > > > >> > > > > again. > >> > > > >> > > > > > >> > > > >> > > > > > Any thoughts ? > >> > > > >> > > > > > > >> > > > >> > > > > > Thank you ! > >> > > > >> > > > > > >> > > > >> > > > > I hope it helps ;) > >> > > > >> > > > > > >> > > > >> > > > > Cheers, > >> > > > >> > > > > > >> > > > >> > > > >> > > > >> > > >> > > > >> > > >> > > > >> > -- > >> > > > >> > Best regards, Leo David > >> > > > >> > >> > > > > > >> > > > > >> > > > -- > >> > > > Best regards, Leo David > >> > > > >> > > >> > > >> > -- > >> > Best regards, Leo David > >> > > > > -- > Best regards, Leo David
signature.asc
Description: PGP signature
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/L5LVTOK2WUIBCXGBRR7FQHHNX2SPV2TL/
