Il giorno gio 11 nov 2021 alle ore 23:19 David White < [email protected]> ha scritto:
> Hi team, > I saw that RHEL 8.5 was released yesterday, so I just put one of my hosts > that doesn't have local gluster storage into maintenance mode and again > attempted an update. > > The update again failed through the oVirt web UI, and a `yum update` from > the command line again failed with the same issues as I documented in this > email thread earlier. > So I ran `yum update --disablerepo ovirt\*` successfully, then I tried a > standard yum update again. > > I'm still getting the same problems. Is there still an issue with > upgrading to the latest version of oVirt, even when on RHEL 8.5? > I'm not going to paste the full stdout here, because there's a lot, but > here's all of the "Problems". > > Should I try a --no-best here? > > Problem 1: cannot install the best update candidate for package > vdsm-4.40.80.6-1.el8.x86_64 > Problem 2: package vdsm-gluster-4.40.90.4-1.el8.x86_64 requires vdsm = > 4.40.90.4-1.el8, but none of the providers can be installed > Problem 3: package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires > vdsm >= 4.40.90, but none of the providers can be installed > Problem 4: package ovirt-host-4.4.9-2.el8.x86_64 requires > ovirt-host-dependencies = 4.4.9-2.el8, but none of the providers can be > installed > Problem 5: package ovirt-provider-ovn-driver-1.2.34-1.el8.noarch requires > vdsm, but none of the providers can be installed > Problem 6: package ovirt-hosted-engine-ha-2.4.9-1.el8.noarch requires vdsm > >= 4.40.0, but none of the providers can be installed > Problem 7: problem with installed package vdsm-4.40.80.6-1.el8.x86_64 > Problem 8: problem with installed package > vdsm-gluster-4.40.80.6-1.el8.x86_64 > Problem 9: problem with installed package > ovirt-provider-ovn-driver-1.2.34-1.el8.noarch > Problem 10: problem with installed package > ovirt-hosted-engine-ha-2.4.8-1.el8.noarch > Problem 11: package ovirt-hosted-engine-setup-2.5.4-2.el8.noarch requires > ovirt-hosted-engine-ha >= 2.4, but none of the providers can be installed > Problem 12: problem with installed package > ovirt-host-dependencies-4.4.8-1.el8.x86_64 > There's something weird here because: "package vdsm-gluster-4.40.90.4-1.el8.x86_64 requires vdsm = 4.40.90.4-1.el8, but none of the providers can be installed" but there's no explanation on why vdsm-4.40.90.4 couldn't be installed. What worries me is the "problem with installed package" list. Can you please run again with "--debugsolver" ? > > I tried rebooting the system, but am getting the same errors, even on the > RHEL 8.5 kernel. > > As an aside, I'm having a really frustrating time with my network > configurations somehow getting somewhat reset on every system reboot, and > it always takes me a while to get full network connectivity up and running > again. I'm running into that issue yet again, but I don't want to derail > the topic here... I can send another email if necessary. > > Sent with ProtonMail <https://protonmail.com/> Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Tuesday, October 26th, 2021 at 9:37 AM, Sandro Bonazzola < > [email protected]> wrote: > > > > Il giorno mar 26 ott 2021 alle ore 15:32 Gianluca Cecchi < > [email protected]> ha scritto: > >> On Tue, Oct 26, 2021 at 12:12 PM Sandro Bonazzola <[email protected]> >> wrote: >> >>> Thanks for the report, my team is looking into the dedependency failures. >>> oVirt 4.4.9 has been developed on CentOS Stream 8 and some dependencies >>> are not yet available on RHEL 8.4 and derivatives. >>> >> >> Ok, fair enough you only test on CentOS Stream 8, but at least I think >> you should change what you are going to write in the next release notes, >> putting only what actually tested. >> >> For 4.4.9 there was: >> >> " >> >> This release is available now on x86_64 architecture for: >> >> - >> >> Red Hat Enterprise Linux 8.4 >> - >> >> CentOS Linux (or similar) 8.4 >> - >> >> CentOS Stream 8 >> >> >> This release supports Hypervisor Hosts on x86_64 and ppc64le >> architectures for: >> >> - >> >> Red Hat Enterprise Linux 8.4 >> - >> >> CentOS Linux (or similar) 8.4 >> - >> >> oVirt Node NG (based on CentOS Stream 8) >> - >> >> CentOS Stream 8 >> >> >> " >> So one understands that at least installation/upgrade from 4.4.8 to 4.4.9 >> has been validated when the hosts are in CentOS 8.4 or in RH EL 8.4, that >> currently are the latest 8.4 level released, while it seems both fails >> right now, correct? >> >> Gianluca >> > > It fails right now, correct. > > > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA <https://www.redhat.com/> > > [email protected] > <https://www.redhat.com/> > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours.* > > > > -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> [email protected] <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/HQWR5KXXYY7RU2B3FMXDHPO3GVJFJVJH/
