Hi Ganesh,
Yes, I had checked your fix but it doesn't seem to work here. Indeed, the test is still failing even when timeout is increased to 100. It seems the drain is always only receiving 8 messages out of 10. I didn't check it on the trunk however to see if it is fixed. Regards, Adel ________________________________ From: Ganesh Murthy <gmur...@redhat.com> Sent: Tuesday, February 28, 2017 3:58:37 PM To: users@qpid.apache.org Subject: Re: [Qpid Dispatch - 0.7.0] Random failure on unit test "system_tests_link_routes" on Linux Hi Adel, We did notice the same problem you are seeing and we did end up increasing the timeout from 5 to 10 (although on a different test) as seen in this commit on master branch - https://github.com/apache/qpid-dispatch/commit/5e6b2e65b2ea9614d7619711961d38aceefb49d4 Is it correct that even when you increased the timeout to 100, the test still fails randomly? Thanks. ----- Original Message ----- > From: "Adel Boutros" <adelbout...@live.com> > To: users@qpid.apache.org > Sent: Tuesday, February 28, 2017 9:00:36 AM > Subject: Re: [Qpid Dispatch - 0.7.0] Random failure on unit test > "system_tests_link_routes" on Linux > > I increased the timeout from 5 to 100 and the test which now takes 110 > seconds instead of 10 seconds is still failing. After re-checking, the error > message is actually the same on each failure. I think there is an issue > here. > > > My patch: > > > diff --git a/tests/system_tests_drain_support.py > b/tests/system_tests_drain_support.py > index e4bd2bc..9a4a86f 100644 > --- a/tests/system_tests_drain_support.py > +++ b/tests/system_tests_drain_support.py > @@ -46,7 +46,7 @@ class DrainMessagesHandler(MessagingHandler): > self.conn.close() > > def on_start(self, event): > - self.timer = event.reactor.schedule(5, Timeout(self)) > + self.timer = event.reactor.schedule(100, Timeout(self)) > self.conn = event.container.connect(self.address) > > # Create a sender and a receiver. They are both listening on the > same address > > > ================== > > Error > > =================== > > > 13: FAIL: test_www_drain_support_all_messages > (system_tests_link_routes.LinkRouteTest) > 13: ---------------------------------------------------------------------- > 13: Traceback (most recent call last): > 13: File "/qpid-dispatch-0.7.0/tests/system_tests_link_routes.py", line > 489, in test_www_drain_support_all_messages > 13: self.assertEqual(None, drain_support.error) > 13: AssertionError: None != 'Timeout Expired: sent: 10 rcvd: 8' > 13: > 13: ---------------------------------------------------------------------- > 13: Ran 15 tests in 109.933s > 13: > 13: FAILED (failures=1) > 1/1 Test #13: system_tests_link_routes .........***Failed 110.16 sec > > Regards, > > Adel > > ________________________________ > From: Adel Boutros <adelbout...@live.com> > Sent: Tuesday, February 28, 2017 2:47:16 PM > To: users@qpid.apache.org > Subject: [Qpid Dispatch - 0.7.0] Random failure on unit test > "system_tests_link_routes" on Linux > > Hello, > > > I noticed a random issue with the Dispatch Router 0.7.0 which has a random > failure in the test "system_tests_link_routes". > > I launch the same test 10 times, it fails randomly (Failure occurs at the 4th > or 5th run) but always with a similar error. It seems the timeout of 5 > milliseconds is not enough especially on slow machines. > > > I had submitted a patch for a similar task > (https://issues.apache.org/jira/browse/DISPATCH-627) > > > Can you please confirm? > > > Regards, > > Adel > > > 13: ====================================================================== > 13: FAIL: test_www_drain_support_all_messages > (system_tests_link_routes.LinkRouteTest) > 13: ---------------------------------------------------------------------- > 13: Traceback (most recent call last): > 13: File "/qpid-dispatch-0.7.0/tests/system_tests_link_routes.py", line > 489, in test_www_drain_support_all_messages > 13: self.assertEqual(None, drain_support.error) > 13: AssertionError: None != 'Timeout Expired: sent: 10 rcvd: 8' > > > --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscr...@qpid.apache.org For additional commands, e-mail: users-h...@qpid.apache.org
