Hi Changue, currently we the only support the xbee s2 module for arduino due, as far as I know. However this one is only ported for our new network architecture (which also provides preliminary Ethernet support via the encx24j600 chip) where there is currently no CCN-lite version for. We hope however to get this out for our next release at the end of this month.
Kind regards, Martine 2015-06-01 9:49 GMT+02:00 changue jung <[email protected]>: > Oh, Thank you! :) > > Actually i already posted my question but, > At first i wanted to use 'Ethernet' with 'EthernetShield + Ethernet Cable' > But i saw an mailinglist that current RIOT doesn't support Ethernet.. is > it available now? > > If not, can you recommend me some candidate of transceiver for > Arduino-mega2560 ? I'm a newbie of this field ^^; > Thank you very much! > > Sincerely, > Changue > > 2015-06-01 16:39 GMT+09:00 Ludwig Ortmann <[email protected]>: > >> Hi, >> >> The board you are using does not feature a transceiver. >> In order to use the network stack you need to configure a transceiver >> externally. Which transceiver do you want to use? >> >> Cheers, >> Ludwig >> >> Am 1. Juni 2015 06:34:55 MESZ, schrieb changue jung <[email protected] >> >: >> >Hello, everyone. >> > >> >I'm trying to play with CCN-lite with real hardware board >> >(Arduino-mega2560) >> >so, i followed the tutorial >> > >> >[RIOT] cd examples/ccn-lite-client >> > >> >then, >> > >> ># make BOARD=arduino-mega2560 flash >> > >> >as tutorial says... >> > >> >Below is the result of that command. >> > >> >What's wrong with it? and how could i fix it? >> > >> >Thanks in advance >> > >> >Changue >> > >> >> >------------------------------------------------------------------------------------------------------------------ >> > >> >root@comnet-Lenovo-IdeaPad-S400 >> :/home/comnet/RIOT/examples/ccn-lite-client# >> >BOARD=arduino-mega2560 make all flash >> > >> >There are unsatisfied feature requirements: transceiver >> > >> >EXPECT ERRORS! >> > >> >Building application "ccn-lite-client" for "arduino-mega2560" with MCU >> >"atmega2560". >> > >> >In file included from /home/comnet/RIOT/sys/include/transceiver.h:26:0, >> > >> >from /home/comnet/RIOT/examples/ccn-lite-client/main.c:31: >> > >> >/home/comnet/RIOT/sys/include/radio/types.h:79:5: error: unknown type >> >name >> >‘radio_packet_length_t’ >> > >> >radio_packet_length_t length; ///< Length of payload >> > >> >^ >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >> >‘riot_ccn_register_prefix’: >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:123:9: warning: >> >unused >> >variable ‘content_len’ [-Wunused-variable] >> > >> >int content_len = ccnl_riot_client_publish(_relay_pid, small_buf, >> >faceid, >> >type, big_buf); >> > >> >^ >> > >> >In file included from >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:39:0: >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >> >‘riot_ccn_transceiver_start’: >> > >> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: error: >> >‘TRANSCEIVER_DEFAULT’ undeclared (first use in this function) >> > >> >#define TRANSCEIVER TRANSCEIVER_DEFAULT >> > >> >^ >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in >> >expansion of macro ‘TRANSCEIVER’ >> > >> >transceiver_init(TRANSCEIVER); >> > >> >^ >> > >> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: note: >> >each >> >undeclared identifier is reported only once for each function it >> >appears in >> > >> >#define TRANSCEIVER TRANSCEIVER_DEFAULT >> > >> >^ >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in >> >expansion of macro ‘TRANSCEIVER’ >> > >> >transceiver_init(TRANSCEIVER); >> > >> >^ >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >> >‘riot_ccn_relay_config’: >> > >> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:148:1: warning: >> >control >> >reaches end of non-void function [-Wreturn-type] >> > >> >} >> > >> >^ >> > >> >make[1]: *** >> >> >[/home/comnet/RIOT/examples/ccn-lite-client/bin/arduino-mega2560/ccn-lite-client/main.o] >> >Error 1 >> > >> >make: *** [all] Error 2 >> > >> >root@comnet-Lenovo-IdeaPad-S400 >> :/home/comnet/RIOT/examples/ccn-lite-client# >> > >> > >> >------------------------------------------------------------------------ >> > >> >_______________________________________________ >> >users mailing list >> >[email protected] >> >http://lists.riot-os.org/mailman/listinfo/users >> >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.riot-os.org/mailman/listinfo/users >> > > > _______________________________________________ > users mailing list > [email protected] > http://lists.riot-os.org/mailman/listinfo/users > >
_______________________________________________ users mailing list [email protected] http://lists.riot-os.org/mailman/listinfo/users
