Thank you, Martine! It's really helpful and interesting! As you answered, i think it's impossible to make CCN-lite network with Arduino until now.
In paper, "Information Centric Networking in the IoT: Experiments with NDN in the wild" there are real environment testbeds with RIOT (MSBA-2). What i wannted to do was similar things with Arduino-mega2560. then if i want to make real envrionment CCN-lite testbed, MSBA-2 is only candidate until now for real environment CCN-lite? Sincerely, Changue 2015-06-01 17:49 GMT+09:00 Martine Lenders <[email protected]>: > Hi Changue, > currently we the only support the xbee s2 module for arduino due, as far > as I know. However this one is only ported for our new network architecture > (which also provides preliminary Ethernet support via the encx24j600 chip) > where there is currently no CCN-lite version for. We hope however to get > this out for our next release at the end of this month. > > Kind regards, > Martine > > 2015-06-01 9:49 GMT+02:00 changue jung <[email protected]>: > >> Oh, Thank you! :) >> >> Actually i already posted my question but, >> At first i wanted to use 'Ethernet' with 'EthernetShield + Ethernet >> Cable' >> But i saw an mailinglist that current RIOT doesn't support Ethernet.. is >> it available now? >> >> If not, can you recommend me some candidate of transceiver for >> Arduino-mega2560 ? I'm a newbie of this field ^^; >> Thank you very much! >> >> Sincerely, >> Changue >> >> 2015-06-01 16:39 GMT+09:00 Ludwig Ortmann <[email protected]>: >> >>> Hi, >>> >>> The board you are using does not feature a transceiver. >>> In order to use the network stack you need to configure a transceiver >>> externally. Which transceiver do you want to use? >>> >>> Cheers, >>> Ludwig >>> >>> Am 1. Juni 2015 06:34:55 MESZ, schrieb changue jung < >>> [email protected]>: >>> >Hello, everyone. >>> > >>> >I'm trying to play with CCN-lite with real hardware board >>> >(Arduino-mega2560) >>> >so, i followed the tutorial >>> > >>> >[RIOT] cd examples/ccn-lite-client >>> > >>> >then, >>> > >>> ># make BOARD=arduino-mega2560 flash >>> > >>> >as tutorial says... >>> > >>> >Below is the result of that command. >>> > >>> >What's wrong with it? and how could i fix it? >>> > >>> >Thanks in advance >>> > >>> >Changue >>> > >>> >>> >------------------------------------------------------------------------------------------------------------------ >>> > >>> >root@comnet-Lenovo-IdeaPad-S400 >>> :/home/comnet/RIOT/examples/ccn-lite-client# >>> >BOARD=arduino-mega2560 make all flash >>> > >>> >There are unsatisfied feature requirements: transceiver >>> > >>> >EXPECT ERRORS! >>> > >>> >Building application "ccn-lite-client" for "arduino-mega2560" with MCU >>> >"atmega2560". >>> > >>> >In file included from /home/comnet/RIOT/sys/include/transceiver.h:26:0, >>> > >>> >from /home/comnet/RIOT/examples/ccn-lite-client/main.c:31: >>> > >>> >/home/comnet/RIOT/sys/include/radio/types.h:79:5: error: unknown type >>> >name >>> >‘radio_packet_length_t’ >>> > >>> >radio_packet_length_t length; ///< Length of payload >>> > >>> >^ >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >>> >‘riot_ccn_register_prefix’: >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:123:9: warning: >>> >unused >>> >variable ‘content_len’ [-Wunused-variable] >>> > >>> >int content_len = ccnl_riot_client_publish(_relay_pid, small_buf, >>> >faceid, >>> >type, big_buf); >>> > >>> >^ >>> > >>> >In file included from >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:39:0: >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >>> >‘riot_ccn_transceiver_start’: >>> > >>> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: error: >>> >‘TRANSCEIVER_DEFAULT’ undeclared (first use in this function) >>> > >>> >#define TRANSCEIVER TRANSCEIVER_DEFAULT >>> > >>> >^ >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in >>> >expansion of macro ‘TRANSCEIVER’ >>> > >>> >transceiver_init(TRANSCEIVER); >>> > >>> >^ >>> > >>> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: note: >>> >each >>> >undeclared identifier is reported only once for each function it >>> >appears in >>> > >>> >#define TRANSCEIVER TRANSCEIVER_DEFAULT >>> > >>> >^ >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in >>> >expansion of macro ‘TRANSCEIVER’ >>> > >>> >transceiver_init(TRANSCEIVER); >>> > >>> >^ >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function >>> >‘riot_ccn_relay_config’: >>> > >>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:148:1: warning: >>> >control >>> >reaches end of non-void function [-Wreturn-type] >>> > >>> >} >>> > >>> >^ >>> > >>> >make[1]: *** >>> >>> >[/home/comnet/RIOT/examples/ccn-lite-client/bin/arduino-mega2560/ccn-lite-client/main.o] >>> >Error 1 >>> > >>> >make: *** [all] Error 2 >>> > >>> >root@comnet-Lenovo-IdeaPad-S400 >>> :/home/comnet/RIOT/examples/ccn-lite-client# >>> > >>> > >>> >------------------------------------------------------------------------ >>> > >>> >_______________________________________________ >>> >users mailing list >>> >[email protected] >>> >http://lists.riot-os.org/mailman/listinfo/users >>> >>> _______________________________________________ >>> users mailing list >>> [email protected] >>> http://lists.riot-os.org/mailman/listinfo/users >>> >> >> >> _______________________________________________ >> users mailing list >> [email protected] >> http://lists.riot-os.org/mailman/listinfo/users >> >> > > _______________________________________________ > users mailing list > [email protected] > http://lists.riot-os.org/mailman/listinfo/users > >
_______________________________________________ users mailing list [email protected] http://lists.riot-os.org/mailman/listinfo/users
