Dear Caldarale, As per the ifconfig command, it seems BROADCAST and MULTICAST are enabled on my AIX 5.3 Network interface:
bash-3.00# ifconfig -a en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROU PRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN> inet 192.168.12.103 netmask 0xfffffe00 broadcast 192.168.13.255 tcp_sendspace 131072 tcp_recvspace 65536 en1: flags=5e080862,c0<BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN> inet 192.168.12.8 netmask 0xfffffe00 broadcast 192.168.13.255 tcp_sendspace 131072 tcp_recvspace 65536 et0: flags=5e080862,80<BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,CHAIN> inet 192.168.12.103 netmask 0xfffffe00 broadcast 192.168.13.255 lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64 BIT> inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 inet6 ::1/0 tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1 Is there another place to check if MULTICAST is enabled or to be configured somewhere ? Imad Hachem | Asst.Product Development Manager e-Banking Department Path Solutions Tel: +961 1 697444 ext. 222 Fax: +961 1 696744 www.path-solutions.com Disclaimer [The information contained in this e-mail message and any attached files are confidential information and intended solely for the use of the individual or entity to whom they are addressed. This transmission may contain information that is privileged, confidential or exempt from disclosure under applicable law. If you have received this e-mail in error, please notify the sender immediately and delete all copies. If you are not the intended recipient, any disclosure, copying, distribution, or use of the information contained herein is STRICTLY PROHIBITED. Path Solutions accepts no responsibility for any errors, omissions, computer viruses and other defects.] -----Original Message----- From: Caldarale, Charles R [mailto:chuck.caldar...@unisys.com] Sent: Wednesday, October 14, 2009 7:54 PM To: Tomcat Users List Subject: RE: Tomcat Startup Error on "IBM AIX 5.3" after Cluster enable in server.xml > From: Imad Hachem [mailto:ihac...@lb.path-solutions.com] > Subject: Tomcat Startup Error on "IBM AIX 5.3" after Cluster enable in > server.xml > > I am getting the below error during Tomcat-5.5.12 Startup on "IBM AIX > 5.3" after enabling the Cluster configuration in "server.xml" : You might want to try with a version of Tomcat that's a bit newer than your four-year-old one. Is multicasting enabled on your platform? (I have no idea how that's done on AIX.) - Chuck THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscr...@tomcat.apache.org For additional commands, e-mail: users-h...@tomcat.apache.org --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscr...@tomcat.apache.org For additional commands, e-mail: users-h...@tomcat.apache.org