>> Well, this is enough to get you started. Enjoy the googling!

Thanks a lot Jim! Yes it certainly is, and I will.

Nat  

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of James Frysinger
Sent: Saturday, 2004 January 03 15:58
To: U.S. Metric Association
Subject: [USMA:28142] Re: UPLR status page updated


On Saturday 2004 January 03 15:07, Nat Hager III wrote:
> Sure would like to know what's going on in my embarrassingly purple 
> state. I've searched Pennsylvania and UPLR and all I get is a lot of 
> references to the University of Pittsburgh Law Review.
>
> Nat

Nat,

Pennsylvania code on weights and measures is at
  http://www.pacode.com/secure/data/070/070toc.html
The labeling section is at
  http://www.pacode.com/secure/data/070/partIItoc.html
and it indexes four files.These will probably serve only to tell you
what the 
current code says but in writing to legislators it helps often to cite 
specifics. If you show that you are up on the law citations, you are
more 
likely to be taken seriously, I think. The pertinent section is Title
70, 
Part II, Chapter 23, Subchapter 23a, section � 23.15a. 

[quote; 
http://www.pacode.com/secure/data/070/chapter23/chap23toc.html#23.15a.]
� 23.15a. Metric system declarations:
A separate statement of the net quantity of contents in terms of the
metric 
system is not regarded as a supplemental statement, and a statement of 
quantity in terms of the metric system of weight or measure may also
appear 
on the principal display panel or other panels.

Source

The provisions of this �  23.15a adopted March 11, 1977, effective March
12, 
1977, 7 Pa.B. 706.
[end quote]

You will also want to be conversant with Act 1996-155, found at
    
http://www.agriculture.state.pa.us/weights/cwp/view.asp?A=3&QUESTION_ID=
114299
especially sections 4127 and 4128. Sections 4135 and 4136 set required
sizes 
for packages of butter/oleo and of dairy products, respectively; section
4138 
similarly sets package sizes for potatoes. Section 4137 is interesting
in 
that this is where Pennsylvania requires flour, grits, cornmeal, etc. to
be 
sold in only certain sizes of packages unless they are over 100 lb or
under 3 
lb. This section seems to be a pet of a certain Pennsy statesman (I
don't 
know who) but I think it is the one NIST refered to in declaring it the 
reason that PA is "wedged". So this act would also have to be revised!

Interestingly, Act 1996-155, section 4136 says that dairy products may
be sold 
in any sized package less than one gill or in metric or metric
equivalent 
packages of 125 milliliters, 250 milliliters, 500 milliliters, 1 liter
or 
multiples of 1 liter. 

A section not involved with labeling per se but implementing the use of
the 
metric system in PA is at
  http://www.pacode.com/secure/data/001/chapter13/s13.39.html

The points of contact at the PA W&MO are:
Charles Bruckner, Director
Bureau of Ride and Measurement Standards
Department of Agriculture
2301 North Cameron Street
Harrisburg, PA 17110-9408
717-787-9089
717-787-6772
Fax: 717-783-4158
E-mail: [EMAIL PROTECTED]
Web site: www.pda.state.pa.us

Well, this is enough to get you started. Enjoy the googling!

Jim

-- 
James R. Frysinger
Lifetime Certified Advanced Metrication Specialist
Senior Member, IEEE

http://www.cofc.edu/~frysingj
[EMAIL PROTECTED]
[EMAIL PROTECTED]

Office:
  Physics Lab Manager, Lecturer
  Dept. of Physics and Astronomy
  University/College of Charleston
  66 George Street
  Charleston, SC 29424
  843.953.7644 (phone)
  843.953.4824 (FAX)

Home:
  10 Captiva Row
  Charleston, SC 29407
  843.225.0805


Reply via email to