Excellent. Thanks for pointing that out and finding a reference. -- Terry Simpson Human Factors Consultant Connected Systems Ltd
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Bill Potts > Sent: 30 January 2004 17:26 > To: U.S. Metric Association > Subject: [USMA:28453] Re: Bolt specification > > As a follow up to my own comment, see > http://www.metalinfo.com/propertysam.cfm. Scroll down to the Mechanical > Properties table. > > You'll see the unit they use is MPa. > > Bill Potts, CMS > Roseville, CA > http://metric1.org [SI Navigator] > > > >-----Original Message----- > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >Behalf Of Bill Potts > >Sent: Friday, January 30, 2004 09:10 > >To: U.S. Metric Association > >Subject: [USMA:28452] Re: Bolt specification > > > > > >Maybe it should be MPa. > > > >Bill Potts, CMS > >Roseville, CA > >http://metric1.org [SI Navigator] > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >>Behalf Of Terry Simpson > >>Sent: Friday, January 30, 2004 02:47 > >>To: U.S. Metric Association > >>Subject: [USMA:28451] Re: Bolt specification > >> > >> > >>>The first number is 1/100 of the nominal tensile > >>>strength in N/mm2 (newtons per square millimeter. > >> > >>Where did I see the recommendation to have the multiplier on the top? > >>If so, it should be: > >>MN/m2 > >> > >
