Send USRP-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of USRP-users digest..."
Today's Topics:
1. Re: Transmit and receive bits (manjusha)
2. please anwer: Changing USRP -UHD- frequency
(Juan Daniel Fernandez Martinez)
3. Re: Pre-cog (manjusha)
4. Re: Pre-cog (John Malsbury)
5. Re: Pre-cog (manjusha)
6. Re: Pre-cog (John Malsbury)
7. Re: Transmit and receive bits (Josh Blum)
8. Setting external reference for subsequent programs
(Kevin Rosenberg)
9. right for R3 but wrong for R4? (???)
10. Re: right for R3 but wrong for R4? (Nick Foster)
----------------------------------------------------------------------
Message: 1
Date: Mon, 4 Mar 2013 19:42:03 +0000 (UTC)
From: manjusha <[email protected]>
To: [email protected]
Subject: Re: [USRP-users] Transmit and receive bits
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
Thank you Josh.I built the grc blocks as you said for transmitting and receiving
messages.But i need help in running them over terminal.What could be the set of
commands i could use to get this work?
Thanks
------------------------------
Message: 2
Date: Mon, 4 Mar 2013 21:49:39 +0000
From: Juan Daniel Fernandez Martinez <[email protected]>
To: "[email protected]" <[email protected]>,
"[email protected]" <[email protected]>
Subject: [USRP-users] please anwer: Changing USRP -UHD- frequency
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
________________________________
De: USRP-users [[email protected]] en nombre de Juan Daniel
Fernandez Martinez [[email protected]]
Enviado el: lunes, 04 de marzo de 2013 11:53 a.m.
Para: [email protected]; [email protected]
Asunto: [USRP-users] Changing USRP -UHD- frequency
Hi everyone,
I need to choose one of this options and I would really appreciate your help.
I need to scan a range of the spectrum that is bigger than the USRP capacity.
In order to solve this, I will scan chunks of the spectrum that cover the same
spectrum range using several steps.
I have thought in two approaches:
1: use gr.bin_statistics just to change the USRP frequency
2: Build a block to manipulate the variables used by the UHD block (I do not
know how to change variables values (the ones that are like blocks) within a
block)
Which one would be better? (easier, efficient)
Thanks
________________________________
Este documento puede contener informaci?n privilegiada o confidencial. Por
tanto, usar esta informaci?n y sus anexos para prop?sitos ajenos a los de la
Universidad Icesi, divulgarla a personas a las cuales no se encuentre destinado
este correo o reproducirla total o parcialmente, se encuentra prohibido en
virtud de la legislaci?n vigente. La universidad no asumir? responsabilidad
sobre informaci?n, opiniones o criterios contenidos en este correo que no est?n
directamente relacionados con la Icesi. Si usted no es el destinatario
autorizado o por error recibe este mensaje, por favor informe al remitente y
posteriormente b?rrelo de su sistema sin conservar copia del mismo.
________________________________
Este documento puede contener informaci?n privilegiada o confidencial. Por
tanto, usar esta informaci?n y sus anexos para prop?sitos ajenos a los de la
Universidad Icesi, divulgarla a personas a las cuales no se encuentre destinado
este correo o reproducirla total o parcialmente, se encuentra prohibido en
virtud de la legislaci?n vigente. La universidad no asumir? responsabilidad
sobre informaci?n, opiniones o criterios contenidos en este correo que no est?n
directamente relacionados con la Icesi. Si usted no es el destinatario
autorizado o por error recibe este mensaje, por favor informe al remitente y
posteriormente b?rrelo de su sistema sin conservar copia del mismo.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20130304/e840cb6a/attachment-0001.html>
------------------------------
Message: 3
Date: Mon, 4 Mar 2013 23:29:02 +0000 (UTC)
From: manjusha <[email protected]>
To: [email protected]
Subject: Re: [USRP-users] Pre-cog
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
John Malsbury <john.malsbury@...> writes:
>
Hi,
Thanks for your post.What changes have to be made if i want to transmit and
receive messages through one usrp.
Thanks.
------------------------------
Message: 4
Date: Mon, 4 Mar 2013 15:34:45 -0800
From: John Malsbury <[email protected]>
To: manjusha <[email protected]>
Cc: [email protected]
Subject: Re: [USRP-users] Pre-cog
Message-ID:
<can5wegrjxxkomktz_9z+tw7ez-otytfcjqqphwqi90navb9...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
The example provided only uses one USRP. If you're only using one USRP,
what will you receive message from, or transmit messages to?
Maybe I'm misunderstanding your question...
-John
On Mon, Mar 4, 2013 at 3:29 PM, manjusha <[email protected]> wrote:
> John Malsbury <john.malsbury@...> writes:
>
> >
>
> Hi,
>
> Thanks for your post.What changes have to be made if i want to transmit and
> receive messages through one usrp.
>
> Thanks.
>
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20130304/0281b691/attachment-0001.html>
------------------------------
Message: 5
Date: Mon, 4 Mar 2013 23:41:22 +0000 (UTC)
From: manjusha <[email protected]>
To: [email protected]
Subject: Re: [USRP-users] Pre-cog
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8
John Malsbury <john.malsbury@...> writes:
> The example uses two USRPs.But i want to use only one USRP. i.e,Transmit
through one antenna and receive through another antenna(Both antennas belong to
the same USRP)..Hope my question is clear now.If not please let me know.
Thanks.
> The example provided only uses one USRP.? If you're only using one USRP, what
will you receive message from, or transmit messages to?Maybe I'm
misunderstanding your question...-John
>
> On Mon, Mar 4, 2013 at 3:29 PM, manjusha
<[email protected]> wrote:
> John Malsbury <john.malsbury <at> ...> writes:
> >
> Hi,
> Thanks for your post.What changes have to be made if i want to transmit and
> receive messages through one usrp.
> Thanks.
>
> _______________________________________________
> USRP-users mailing
[email protected]http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@...
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
------------------------------
Message: 6
Date: Mon, 4 Mar 2013 15:54:55 -0800
From: John Malsbury <[email protected]>
To: manjusha <[email protected]>
Cc: [email protected]
Subject: Re: [USRP-users] Pre-cog
Message-ID:
<can5wegtos2o-2g348yhqw0myvvdjpl24_srgf256_aoewlo...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
That kind of takes the "wireless" out of wireless research. But if you
insist:
1. Its probably easiest to remove the "Simple Mac" block.
2. Connect your application layer msg src/sinks to the radio_hier block.
3. There is sufficient leakage in the radios that you'll receive all of
the messages that you transmit
-John
On Mon, Mar 4, 2013 at 3:41 PM, manjusha <[email protected]> wrote:
> John Malsbury <john.malsbury@...> writes:
>
> > The example uses two USRPs.But i want to use only one USRP. i.e,Transmit
> through one antenna and receive through another antenna(Both antennas
> belong to
> the same USRP)..Hope my question is clear now.If not please let me know.
> Thanks.
> > The example provided only uses one USRP. If you're only using one USRP,
> what
> will you receive message from, or transmit messages to?Maybe I'm
> misunderstanding your question...-John
> >
> > On Mon, Mar 4, 2013 at 3:29 PM, manjusha
> <[email protected]> wrote:
> > John Malsbury <john.malsbury <at> ...> writes:
> > >
> > Hi,
> > Thanks for your post.What changes have to be made if i want to transmit
> and
> > receive messages through one usrp.
> > Thanks.
> >
> > _______________________________________________
> > USRP-users mailing
> [email protected]://
> lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users@...
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20130304/13bd3757/attachment-0001.html>
------------------------------
Message: 7
Date: Mon, 04 Mar 2013 18:00:21 -0600
From: Josh Blum <[email protected]>
To: [email protected]
Subject: Re: [USRP-users] Transmit and receive bits
Message-ID: <[email protected]>
Content-Type: text/plain; charset=ISO-8859-1
On 03/04/2013 01:42 PM, manjusha wrote:
> Thank you Josh.I built the grc blocks as you said for transmitting and
> receiving
> messages.But i need help in running them over terminal.What could be the set
> of
> commands i could use to get this work?
>
When you run a GRC app, it will usually print something like this in the
debug window:
Executing: "/home/user/Desktop/top_block.py"
So, top_block.py is the flow graph code generated by GRC, but you can
simply run this outside of GRC in the terminal like so:
/home/user/Desktop/top_block.py
-josh
> Thanks
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
------------------------------
Message: 8
Date: Mon, 4 Mar 2013 22:04:55 -0700
From: Kevin Rosenberg <[email protected]>
To: [email protected]
Subject: [USRP-users] Setting external reference for subsequent
programs
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii
Hello,
Apologies to the list if this is documented somewhere and I missed it.
I'd like to configure my N210/B100s to use my house standard 10MHz
reference (and PPS) in programs such as uhd_siggen_gui that don't
appear to have the ability to set the clock reference to an external
source.
Is there a means to configure an N210 or B100 to use an external
reference for subsequent programs until the device is told to
use a different clock reference?
Thanks,
Kevin
------------------------------
Message: 9
Date: Tue, 5 Mar 2013 22:39:46 +0800
From: ??? <[email protected]>
To: [email protected]
Subject: [USRP-users] right for R3 but wrong for R4?
Message-ID: <[email protected]>
Content-Type: text/plain; charset="GB2312"
Hi:
We use USRPs for a FDD system. USRP N210, rev 4 motherboard and rev 4
daughterboard.
Last month we re-installated the OS of one of our servers(Server 1).
After that, the output of our software went wrong. It seemed that the TX
module worked well but the waveform received from RX module looked
strange. At the same time, the same software works well on the other
server(Server 2), which has the same server, OS, version of complier,
boost and UHD.
Last week we replaced the R4 motherboard with an R3
motherboard.(daughterboard was still Rev 4)To our surprise, it went well
at once.The replaced motherboard has no fault because it works well on
Server 2.
Who can tell me why is that?What's the difference between RX module of
R3 and R4 motherboard? We need r4 board because we have only one R3 board.
Looking forward to reply.
ps:
our UHD version:003.001.002
------------------------------
Message: 10
Date: Tue, 05 Mar 2013 07:55:26 -0800
From: Nick Foster <[email protected]>
To: [email protected]
Subject: Re: [USRP-users] right for R3 but wrong for R4?
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8; format=flowed
On 03/05/2013 06:39 AM, ??? wrote:
> Hi:
>
> We use USRPs for a FDD system. USRP N210, rev 4 motherboard and rev 4
> daughterboard.
>
> Last month we re-installated the OS of one of our servers(Server 1).
> After that, the output of our software went wrong. It seemed that the TX
> module worked well but the waveform received from RX module looked
> strange. At the same time, the same software works well on the other
> server(Server 2), which has the same server, OS, version of complier,
> boost and UHD.
>
> Last week we replaced the R4 motherboard with an R3
> motherboard.(daughterboard was still Rev 4)To our surprise, it went well
> at once.The replaced motherboard has no fault because it works well on
> Server 2.
>
> Who can tell me why is that?What's the difference between RX module of
> R3 and R4 motherboard? We need r4 board because we have only one R3 board.
>
> Looking forward to reply.
Release 3.1.2 was actually released before N210 R4 was. You will have
better luck updating to a newer version of UHD, and you will get lots of
new features and bug fixes as a side effect.
--n
>
> ps:
> our UHD version:003.001.002
>
> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
------------------------------
Subject: Digest Footer
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
------------------------------
End of USRP-users Digest, Vol 31, Issue 5
*****************************************
