Hi, I have a similar problem with a B200 on a Linux VM (archlinux) but I am using VMware (Workstation Player 12). I do have USB 3.0 enabled and the VM can see a USB 3.0 hard drive but it can't see the B200. Is there a similar solution for VMware ?
thanks Jacqueline ________________________________________ From: USRP-users [[email protected]] on behalf of Nate Temple via USRP-users [[email protected]] Sent: 14 July 2017 18:33:28 To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] Cc: [email protected] Subject: Re: [USRP-users] Very Close - Trying to Connect B210 Using VMware Hi Konstanitn, I assume you mean you are using VirtualBox, not VMWare. You will need to add a USB Filtering rule for the USRP within the settings for the virtual machine (within VirtualBox settings). You will need to add a rule for VID: 2500 PID: 0020 for the B210. Also, you need replace the value "<install-path>" with the path to which UHD is installed, commonly this is /usr/local/. uhd_images_downloader will be located /usr/local/lib/uhd/utils/uhd_image_downloader.py Regards, Nate Temple > On Jul 14, 2017, at 9:28 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN > TECHNOLOGIES INC] via USRP-users <[email protected]> wrote: > > > Hello to everyone. I am a novice to the B210. My main first task is to > hookup the B210 to the laptop via Oracle VMware (Virtual machine). > > I realize this may not be the most admired approach, but I think i am very > close in getting the B210 connected. btw, after many hours of hurdles that i > found out already. > > I hope you can review the screen shot first. > Comments/Facts > > 1) the B210 is USB 3.0 > 2) I already installed Windows host.guest USB 3.0 driver and Oracle VMware > extensions pack to allow the USB 3.0 to pass from the Windows 7 OS to the > virtual Ubuntu 16.04 OS. I hear the beep noise when I open the Vmware > software. Thus, giving a good sign that the Linux OS as detected the USB 3.0 > port of the B210. > 3) When running the 'uhd_find_devices' at the terminal prompt, a message > come up stating that I needed to update the B210 image by running the folling > python code -/usr/lib/uhd/utils/uhd_images_downloader.py - This seemed to > update a driver. > 4) I then unplugged the B210 and reset the Linux software. > 5) But then when I ran the 'uhd_find_devices' command in the terminal, i > received No UHD Devices Found. > > At this time, I am out of ideas, thus if anyone can help out in assisting me > in getting tthings connected with the current approach. > > Thanks > > Konstanitn > > > > Have a little more info that might help. Look at the screenshot. i have a > B210, but it shows it is trying to load a b200 hex file to firmware. This > happens when I unplug and plug the USB port in. May this be the issue? > > Thanks > > > > <image.png><image1.png>_______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
