Hello, I'm trying to "HOT" debug on E310 with the JTAG, what I'm trying to
say with HOT is burning the image but maintaining the OS functional for
open the GnuRadio and test my RFNoc Module whit all the system running, is
it possible ? because I'm experiencing some issues with it. To start whit
this task I followed the Tutorial of the X310 and try to debug the SIGGEN
block I can debug my image correctly if I umount the MicroSDcard and burn
the image directly into the FPGA, but when the SDCard is mounted I can't
even start ILA.

This is the Vivado's information of the same image that works without the
sdcard mounted

WARNING: [Labtools 27-3123] The debug hub core was not detected at User
Scan Chain 1 or 3.
1. Make sure the clock connected to the debug hub (dbg_hub) core is a free
running clock and is active OR
2. Manually launch hw_server with -e "set xsdb-user-bscan
<C_USER_SCAN_CHAIN scan_chain_number>" to detect the debug hub at User Scan
Chain of 2 or 4. To determine the user scan chain setting, open the
implemented design and use: get_property C_USER_SCAN_CHAIN [get_debug_cores
WARNING: [Labtools 27-1974] Mismatch between the design programmed into the
device xc7z020_1 and the probes file
The device design has 0 ILA core(s) and 0 VIO core(s). The probes file has
1 ILA core(s) and 0 VIO core(s).
1. Reprogram device with the correct programming file and associated probes
file OR
2. Goto device properties and associate the correct probes file with the
programming file already programmed in the device.

I saw that the E310 reboot when the Vivado burn the image into the FPGA
with the microSD mounted, so I put the SIGGEN image with the name
of usrp_e310_fpga.bit and check the image loaded with the uhd_usrp_probe
without burning from VIVADO but hit refresh, and again no luck.

Please, can somebody give me some ideas about it, is it possible to
do?. Thank you in advance.
USRP-users mailing list

Reply via email to