Hi all,
Do you give us some advice?
thank you.

best regards
Jon

2018-03-06 11:48 GMT+08:00 liu Jong <jongliu1...@gmail.com>:

> Hi all,
> We test it with matlan2017b.But we don't think it does with softwere.
>
> best regards
> Jon
>
> 2018-03-05 10:29 GMT+08:00 liu Jong <jongliu1...@gmail.com>:
>
>> Hi all,
>> Any suggestion is welcome.
>>
>> 2018-03-02 14:21 GMT+08:00 liu Jong <jongliu1...@gmail.com>:
>>
>>> Hi all,
>>>        When we set "master_clock_rate=25.6M" for Receiving and we found
>>> that there is a Single frequency interference in
>>> 76.8M(25.6X3),102.4M(25.6X4),153.6M and so on until above 1.5G.We
>>> changed the "master_clock_rate=16M",and we also found that there is a
>>> Single frequency interference in 80M(16X5),96M(16X6)and so on.The signal
>>>  power is larger than  noise about 5db.Is it the problem of the chip or the
>>> problem of USRP E310?
>>> thank you
>>> best regards
>>> Jon
>>>
>>
>>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to