On 09/07/2018 07:01 PM, Serge Malo wrote:
Thanks for you quick answer Marcus:
I always thought it was impossible to create 2 multi_usrp objects
which connects to the same X300 device. Is this really possible?
I can try that on my side later if you think its possible.
Best regards,
Serge
I would say try it. But now that you mention it, it may not work. I'm
not at my lab right now, or I'd try it myself....
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
*Meet us at ION GNSS+ 2018 in Miami! Sept 24-28 2018, booth 604.*
*Serge Malo *
CDO & Co-founder, Skydel Solutions
Cell: 1-514-294-4017
www.skydelsolutions.com <http://www.skydelsolutions.com/>
Twitter: @skydelsol <https://twitter.com/skydelsol>
Avis : Ce message est confidentiel et protégé par le secret
professionnel. Si vous n'êtes pas le destinataire, veuillez informer
l'expéditeur par courriel immédiatement et effacer ce message et en
détruire toute copie. / Notice: This message is confidential and
privileged. If you are not the addressee, please inform the sender by
return e-mail immediately and delete this message and destroy all copies.
On 7 September 2018 at 16:35, Marcus D. Leech via USRP-users
<[email protected] <mailto:[email protected]>> wrote:
On 09/07/2018 04:32 PM, Serge Malo via USRP-users wrote:
Hi all,
I'm trying to use 2 different sampling rates the 2 TX channels of
a X300.
Basically, I create 2 different tx_streamers, and call
usrp->set_tx_rate() for each channel.
I'm getting this error from UHD:
Multiple sampling rates downstream of TX Terminator 0:
RuntimeError: Node 0/DUC_0 specifies 1.25e+07, node 0/DUC_1
specifies 2.5e+07.
I'm using UHD 3.10.3.0.
Can you tell me if this is expected, or should I be able to use 2
different sampling rates?
Thanks,
Serge
If you want different sample rates, you'll likely need to create
two independent multi_usrp objects to contain the streamers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - -
*Meet us at ION GNSS+ 2018 in Miami! Sept 24-28 2018, booth 604.*
*Serge Malo *
CDO & Co-founder, Skydel Solutions
Cell: 1-514-294-4017
www.skydelsolutions.com <http://www.skydelsolutions.com/>
Twitter: @skydelsol <https://twitter.com/skydelsol>
Avis : Ce message est confidentiel et protégé par le secret
professionnel. Si vous n'êtes pas le destinataire, veuillez
informer l'expéditeur par courriel immédiatement et effacer ce
message et en détruire toute copie. / Notice: This message is
confidential and privileged. If you are not the addressee, please
inform the sender by return e-mail immediately and delete this
message and destroy all copies.
_______________________________________________
USRP-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com