On 12/05/2018 04:05 AM, Said Uçar via USRP-users wrote: > Hi all, > > > I'm trying to build batman-adv^[1] for E310 however it required the > kernel sources since it builds /batman-adv.ko/ kernel object. I built > the batctl^[2] and alfred^[3] without problem. I searched on the > internet for kernel sources however couldn't find it. Is there a way to > build batman for e310? >
So a couple of approaches to take: 1) Build the E300 linux distro locally and add recipes for the kernel module and other parts of the software. 2) Inspect the linux kernel recipe used on the E300 and build a local git tree, and copy the kernel config from the build area. Then build the module against those sources. Both are fairly straightforward, but you'll need to figure out some OpenEmbedded stuff. All the information is a available to you. I did peek at the kernel module to see if it would build aainst a 3.14 kernel. They do have an ifdef for kernels below 4.0, but it is clear most work is targeted at later kernels. Good luck! Philip > > > Here is the output of 'uname -a': > > Linux ettus-e3xx-sg3 3.14.2-xilinx #1 SMP PREEMPT Thu Jan 7 14:49:20 > PST 2016 armv7l GNU/Linux > > > [1] = https://git.open-mesh.org/batman-adv.git > > [2] = https://git.open-mesh.org/batctl.git > > [3] = https://git.open-mesh.org/alfred.git > > > Best Regards, > > > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
