Hi Sneha - I take it by you forwarding your query without further comment that you didn't receive an answer to it? FYI It would be useful in the future to add such a comment, enquiring politely, before the forwarded part.
So the big question here is how you are generating the signal. You say "MATLAB", but do not supply your code (m-file or siumulink or whatever). There is very little we can do to help you without knowing how the signal is -actually- being generated. Maybe supply at least a snippet of code or a screenshot of the simulink? There are probably some folks here who use MATLAB with UHD / USRP, so maybe someone on this list will understand you situation. I'd also encourage you to reach out to the MathWorks support, as this might be an area where they know more about the situation more quickly than you'd get here. Hope this is useful! - MLD On Thu, Aug 8, 2019, at 10:22 AM, Sneha vasan via USRP-users wrote: > > > ---------- Forwarded message --------- > From: *Sneha vasan* <[email protected]> > Date: Thu, Aug 8, 2019 at 2:31 PM > Subject: Varying delay in signal reception > To: <[email protected]> > > > > Hi everyone, > > I am transmitting a OFDM modulated random signal padded with zeros which is > generated from the Matlab. I am transmitting this signal using USRP X310. But > I am receiving the continuous random signal with the various delays in the > first burst. This delay in receiving the signal is varying randomly with > should certainly not happen when the parameters are constant. > > In my project I am using a 20cm MIMO Cable to connect TX and RX. Can you > please tell how I am receive signal with a constant delay at receiver. > > Regards, > Sneha > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
