Hi Arun - Short answer: No, the X310 doesn't support "sc8" OTW yet; we're still working on the RFNoC converter from "sc16" to "sc8". As noted, the X310 provides dual SPF+ 1GbENET and 10GbENET, and obtaining the ENET hardware interface to a host computer is very doable, providing a lot of possible sample rates.
When using the Akitio Node (Lite etc), we've found that the Mellanox "MCX4121A-ACAT ConnectX-4" provides very good compatibility with both the host computer and UHD, especially if you're using DPDK for data transport between the X310 and the host computer. Hope this is useful! - MLD On Wed, Oct 16, 2019 at 3:35 PM Arun kumar Verma via USRP-users < [email protected]> wrote: > Hi Users > > I am trying to achieve 50MHz BW (25MHz Each Channel) with X310 and TwinRX > using 1G Ethernet. I went through some of the forums regrading this and > found that X310 does not support 8-bit IQ samples as mentioned in below > link. > > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2016-February/046123.html > > Is still 8-bit IQ samples are not supported in the latest UHD ? > > We are looking for a solution for 50MHz (25MHz Channel each) with laptop > processing (Ubuntu). While going through some comments from different > users I found that using T3NL-T3DIY-AKTU ( > https://www.akitio.com/expansion/node-lite) and Intel X710-DA2 more > than 50MHz BW can be achieved. Is there any other solution available for > this kind of bandwidth as we are looking for some compact solution. > > > Regards, > Arun Verma >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
