Hi Marcus,

Thank you for your reply. Since you foreget to copy the email to me, I have
to reply from my last email.
dpdk_ipv4 is set to 192.168.60.1/24, the ip address of port 1 of X310 is
set to 192.168.60.2.
dpdk_ipv4 = 192.168.60.1/24

Best regards,
Damon

guowang qiu <[email protected]> 于2020年3月17日周二 上午3:03写道:

> Hi everyone,
>
> I am trying to connect my notebook to X310 with a thunderbolt 3 to
> 10GNBase-T module, which has a AQC107 chirp.
> The notebook can find the X310 without DPDK. But it could not find the
> device with DPDK. Is there any suggestion?
>
> UHD Version: 4.0, the master branch.
> DPDK: 18.11 (supporting Aquantia’s AQtion family of chipsets:
> AQC107/AQC108/AQC109 )
> Ubuntu: 18.04
>
> root@sdr:~# dpdk-devbind --status-dev net
> Network devices using DPDK-compatible driver
> ============================================
> 0000:3c:00.0 'AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]
> 87b1' drv=vfio-pci unused=atlantic
> Network devices using kernel driver
> ===================================
> 0000:00:1f.6 'Ethernet Connection (7) I219-LM 15bb' if=eno1 drv=e1000e
> unused=vfio-pci *Active*
> Other Network devices
> =====================
> 0000:6f:00.0 'Device 2723' unused=vfio-pci
>
> root@sdr:~# uhd_find_devices --args=use_dpdk=1,addr=192.168.60.2
> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
> UHD_4.0.0.0-505-g1393553d
> EAL: Detected 12 lcore(s)
> EAL: Detected 1 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> EAL: No free hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:00:1f.6 on NUMA socket -1
> EAL:   Invalid NUMA socket, default to 0
> EAL:   probe driver: 8086:15bb net_e1000_em
> EAL: PCI device 0000:3c:00.0 on NUMA socket -1
> EAL:   Invalid NUMA socket, default to 0
> EAL:   probe driver: 1d6a:87b1 net_atlantic
> EAL:   using IOMMU type 1 (Type 1)
> [ERROR] [DPDK] Could not find route to destination address 192.168.60.2
> [ERROR] [X300] X300 Network discovery error RuntimeError: DPDK: Could not
> find route to destination address 192.168.60.2
> No UHD Devices Found
> Device with port_id=0 already stopped
>
> Best regards,
> Damon
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to