Hi Marcus,

No, it doesn't work.

damon@rssdr:~/.uhd$ sudo uhd_find_devices
--args=use_dpdk=1,addr=192.168.60.2,type=x300,dpdk_mac=24:5e:be:35:ba:e8
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.0.0.0-531-g5fb585c3
EAL: Detected 12 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:00:1f.6 on NUMA socket -1
EAL:   Invalid NUMA socket, default to 0
EAL:   probe driver: 8086:15bb net_e1000_em
EAL: PCI device 0000:3c:00.0 on NUMA socket -1
EAL:   Invalid NUMA socket, default to 0
EAL:   probe driver: 1d6a:80b1 net_atlantic
EAL:   using IOMMU type 1 (Type 1)
[ERROR] [DPDK] Could not find route to destination address 192.168.60.2
[ERROR] [X300] X300 Network discovery error RuntimeError: DPDK: Could not
find route to destination address 192.168.60.2
No UHD Devices Found
Device with port_id=0 already stopped

Best regards,
Damon

On Sat, 21 Mar 2020 at 04:25, Marcus Müller <[email protected]>
wrote:

> Hi Damon,
>
> sorry, that wasn't my intention :( But let me make it better!
>
> My current guess is that UHD's DPDK transport gets confused and tries to
> use the wrong network card. Luckily, we can try to work around that:
>
> uhd_find_devices --args=use_dpdk=1,addr=192.168.60.2,dpdk_mac=XYZ
>
> where XYZ would be the same MAC you've used in your uhd config, i.e. the
> MAC address of the right network card. Does that help?
>
> Best regards,
> Marcus
>
> On 20.03.20 17:54, guowang qiu wrote:
> > Hi Marcus,
> >
> > Thank you for your reply. Since you foreget to copy the email to me, I
> > have to reply from my last email.
> > dpdk_ipv4 is set to 192.168.60.1/24 <http://192.168.60.1/24>, the ip
> > address of port 1 of X310 is set to 192.168.60.2.
> > dpdk_ipv4 = 192.168.60.1/24 <http://192.168.60.1/24>
> >
> > Best regards,
> > Damon
> >
> > guowang qiu <[email protected] <mailto:[email protected]>>
> > 于2020年3月17日周二 上午3:03写道:
> >
> >     Hi everyone,
> >
> >     I am trying to connect my notebook to X310 with a thunderbolt 3 to
> >     10GNBase-T module, which has a AQC107 chirp.
> >     The notebook can find the X310 without DPDK. But it could not find
> >     the device with DPDK. Is there any suggestion?
> >
> >     UHD Version: 4.0, the master branch.
> >     DPDK: 18.11 (supporting Aquantia’s AQtion family of chipsets:
> >     AQC107/AQC108/AQC109 )
> >     Ubuntu: 18.04
> >
> >     root@sdr:~# dpdk-devbind --status-dev net
> >     Network devices using DPDK-compatible driver
> >     ============================================
> >     0000:3c:00.0 'AQC107 NBase-T/IEEE 802.3bz Ethernet Controller
> >     [AQtion] 87b1' drv=vfio-pci unused=atlantic
> >     Network devices using kernel driver
> >     ===================================
> >     0000:00:1f.6 'Ethernet Connection (7) I219-LM 15bb' if=eno1
> >     drv=e1000e unused=vfio-pci *Active*
> >     Other Network devices
> >     =====================
> >     0000:6f:00.0 'Device 2723' unused=vfio-pci
> >
> >     root@sdr:~# uhd_find_devices --args=use_dpdk=1,addr=192.168.60.2
> >     [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
> >     UHD_4.0.0.0-505-g1393553d
> >     EAL: Detected 12 lcore(s)
> >     EAL: Detected 1 NUMA nodes
> >     EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> >     EAL: No free hugepages reported in hugepages-1048576kB
> >     EAL: Probing VFIO support...
> >     EAL: VFIO support initialized
> >     EAL: PCI device 0000:00:1f.6 on NUMA socket -1
> >     EAL:   Invalid NUMA socket, default to 0
> >     EAL:   probe driver: 8086:15bb net_e1000_em
> >     EAL: PCI device 0000:3c:00.0 on NUMA socket -1
> >     EAL:   Invalid NUMA socket, default to 0
> >     EAL:   probe driver: 1d6a:87b1 net_atlantic
> >     EAL:   using IOMMU type 1 (Type 1)
> >     [ERROR] [DPDK] Could not find route to destination address
> 192.168.60.2
> >     [ERROR] [X300] X300 Network discovery error RuntimeError: DPDK:
> >     Could not find route to destination address 192.168.60.2
> >     No UHD Devices Found
> >     Device with port_id=0 already stopped
> >
> >     Best regards,
> >     Damon
> >
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to