Thank you very much for clearing that up.

-Hai

On Thu, Jun 11, 2020 at 1:11 AM Marcus D Leech <[email protected]>
wrote:

> There are critical differences. The X310 was designed to provide a phase
> coherent infrastructure—with that coherence working across multiple units.
>
> The WBX and CBX both have phase resynch which helps tremendously. The
> TwinRx goes further and allows LO sharing, which provides even better
> fidelity of phase coherence.
>
> Sent from my iPhone
>
> On Jun 11, 2020, at 12:57 AM, Hai Nguyen <[email protected]>
> wrote:
>
> 
> Thank you Marcus. I feel it will be the same story if I use two X310s?
> I look a bit at the project gr-doa and as I understand it seems to just
> require the calibration once. I'm not sure if there is a critical
> difference between the WBX/CBX vs. TwinRX for this task though.
>
>
> On Thu, Jun 11, 2020 at 12:05 AM Marcus D Leech <[email protected]>
> wrote:
>
>> No. It is the nature of PLL synthesizers that they won’t land at the same
>> phase offset every time they’re tuned.
>>
>> In addition the DDC components in the FPGA aren’t necessarily going to be
>> at the same phase offset every time.
>>
>> You’ll need to have a phase calibration on every run.
>>
>> Sent from my iPhone
>>
>> > On Jun 11, 2020, at 12:01 AM, Hai Nguyen via USRP-users <
>> [email protected]> wrote:
>> >
>> > 
>> > Hello,
>> >
>> > I'm trying to do phase calibration for two B210s for a DoA application.
>> I use a known tone with splitter and equal-length cables. The problem I'm
>> having is, the phase difference between two corresponding channels of the
>> USRP (for example, RX2 of radio A) seems to change not just between the
>> resets of the USRPs, but also between the runs of the UHD program.
>> >
>> > Is this possible to phase-calibrate the two B210s?
>> >
>> > Thank you and best regards,
>> > Hai
>> > _______________________________________________
>> > USRP-users mailing list
>> > [email protected]
>> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to