On 02/18/2021 10:16 PM, Xiang Ma wrote:
Are there any python code for this? I am using the python interface.
You'll have to kind of infer what to do from the C++ example--there is
no Python version of that example.
On Thu, Feb 18, 2021 at 7:44 PM Marcus D Leech
<[email protected] <mailto:[email protected]>> wrote:
Well there’s the rx_multi_samples example that is part of the UHD
source tree.
Sent from my iPhone
On Feb 18, 2021, at 9:32 PM, Xiang Ma <[email protected]
<mailto:[email protected]>> wrote:
Do you have any example code? I am still confused.
Thank you.
On Thu, Feb 18, 2021 at 5:50 PM Marcus D Leech
<[email protected] <mailto:[email protected]>> wrote:
Just create a 2-channel USRP source and specify a subdev of
“A:0 B:0”.
Sent from my iPhone
On Feb 18, 2021, at 7:38 PM, Xiang Ma via USRP-users
<[email protected]
<mailto:[email protected]>> wrote:
Hi,
I am using a x310 USRP with two UBX daughterboards. Now
I can transmit and receive the signal in RF A daughterboard
with command
self.source.set_antenna("RX2", 0)
self.sink.set_antenna("TX/RX", 0).
Now, I want to transmit the signal in RF A, and receive
the signal in both RF A and RF B. It is actually 1
transmitter and 2 receivers. How can I implement this? I
checked the set_subdev_subdev("B", 1), but it doesn't work.
Thank you,
--
/*Xiang Ma, */Ph.D. Student
College of Engineering
Utah State University
E-mail:[email protected] <mailto:[email protected]>
_______________________________________________
USRP-users mailing list
[email protected] <mailto:[email protected]>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
--
/*Xiang Ma, */Ph.D. Student
College of Engineering
Utah State University
E-mail:[email protected] <mailto:[email protected]>
--
/*Xiang Ma, */Ph.D. Student
College of Engineering
Utah State University
E-mail:[email protected] <mailto:[email protected]>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
