Get a proper splitter. Sent from my iPhone
> On May 7, 2021, at 8:52 AM, Rob Kossler <[email protected]> wrote: > > > This doesn't sound like a good idea to me. > >> On Thu, May 6, 2021 at 11:26 PM Zeng, Huacheng <[email protected]> >> wrote: >> Dear Rob and Marcus, >> >> Thank you for your response. I have a follow up question. Since I do not >> have an RF power splitter at hand for the external LO source, do you think >> it is fine to use a 1-to-2 SMA cable to connect an N210's output port to >> N310's TX and RX External LO ports? Thanks again. >> >> Best regards, >> Hua >> >> >> >>> On Thu, May 6, 2021 at 10:58 PM Marcus D Leech <[email protected]> >>> wrote: >>> This should work. Keep in mind that the mixers in the N310 are 2XLO so the >>> external LO has to be at twice the desired tuned frequency. >>> >>> Sent from my iPhone >>> >>> > On May 6, 2021, at 10:31 PM, Zeng, Huacheng <[email protected]> >>> > wrote: >>> > >>> > >>> > Hello, >>> > >>> > I want to use an external LO for N310. I learned that a common case is to >>> > use a signal generator to produce the external LO and feed it to N310. >>> > Since I do not have a signal generator at the moment, I was wondering if >>> > it is okay to use an N210 to generate the external LO for N310. I will >>> > adjust the Tx gain of N210 so that the output power is in the range of 0 >>> > to 6 dBm. >>> > >>> > Regards, >>> > Hua >>> > _______________________________________________ >>> > USRP-users mailing list -- [email protected] >>> > To unsubscribe send an email to [email protected] >> _______________________________________________ >> USRP-users mailing list -- [email protected] >> To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
