Hi,
I never used UHD4, but at least in UHD3.15 and previous versions, for
the best of my knowledge, there is now way to explicitly assign a given
stream to a given sfp+ (and let me say this is a sin). As far as I can
understand the assignment is, in some way static, the first channel is
streamed on sfp+0, the second on sfp+1, the third again on sfp+0 and so on.
Hope this can be helpful
On 5/14/21 8:33 AM, Paul Atreides wrote:
Hi there:
Im trying to wrap my head around using RFNoC/UHD4 and the X310. Ive gotten
basic flowgraphs working and I’m building custom images in Vivado. Right now
I’m working on the default XG image.
I would like to send the received samples from one UBX160 to 2 different
physical outputs on the x310. The streams will be decimated to different rates
(i.e. stream0=high-rate/stream1=low-rate). Is there a way in GNURadio/rfnoc to
route rx stream0 to SFP+ Port 0 and rx stream1 to SFP+ Port 1? I can’t seem to
find any relevant documents on assigning radio ID, address or ports. Can you
help?
Thanks!
<end transmission>
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
