Following up on this as no one from ettus responded to the original. Would be really great if someone from ettus could respond and let me know If this is possible with RFNoC/UHD with or without GNURadio. The question is, how can I assign a high rate rx-only I/Q stream over SFP+ via either Aurora or Ethernet protocol while also issuing control commands and a low rate TX/RX stream over 1G Ethernet. This seems like the most basic of use cases for the HA/HG images, but I can’t get it to work.
I’m using UHD4.0 with GNURadio 3.8.2 -In the HG image case I’m using an X310 connected via SFP+ and 1G Ethernet to a pc -In the HA image case im using a host PC and connecting the second X310 via SFP+ (both radios running HA image). Can someone help with this? Thanks <end transmission> > On May 14, 2021, at 02:33, Paul Atreides <[email protected]> wrote: > > Hi there: > Im trying to wrap my head around using RFNoC/UHD4 and the X310. Ive gotten > basic flowgraphs working and I’m building custom images in Vivado. Right now > I’m working on the default XG image. > I would like to send the received samples from one UBX160 to 2 different > physical outputs on the x310. The streams will be decimated to different > rates (i.e. stream0=high-rate/stream1=low-rate). Is there a way in > GNURadio/rfnoc to route rx stream0 to SFP+ Port 0 and rx stream1 to SFP+ Port > 1? I can’t seem to find any relevant documents on assigning radio ID, address > or ports. Can you help? > > Thanks! > > <end transmission> _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
