Martin: I’m I’m in discussions with Ettus R&D who are trying to reproduce.
I was unable with mine. Sent from my iPhone > On May 20, 2021, at 1:23 PM, Marcus D Leech <[email protected]> wrote: > > FYI I see the same memory leak and PMU warnings on my SG1 hardware u der > 3.15. So I assume that this is a side effect of the move to MPM for E310 > hardware. > > > > Sent from my iPhone > >> On May 20, 2021, at 12:05 PM, Martin <[email protected]> wrote: >> >> I tried again with the UHD 4.0.0.0 sdimg >> I get a lot of warnings, but with the uhd 4.0.0.0 sdimg the uhd hardware is >> recognized. >> >> I ado see this error with uhd 4.0.0.0: >> [ 50.716349] e31x-pmu: probe of fpga-full:pmu failed with error -524 >> I'm not sure what this means. >> >> If needed, we could work with the uhd 4.0.0 sdimg, but we would really like >> to be able to also keep using our uhd 3.15 development tree. Moving to uhd >> 4.0.0.0 would mean installing both uhd 3.15 and uhd 4.0.0.0 trees on some of >> our deployment host-machines. Which seems error-prone. >> >> Alchemy 2020.01 ni-e31x-F661C4 ttyPS0 >> >> ni-e31x-F661C4 login: root >> root@ni-e31x-F661C4:~# uhd_find_devices >> [INFO] [UHD] linux; GNU C++ version 9.2.0; Boost_107100; >> UHD_4.0.0.0-0-g90ce6062 >> No UHD Devices Found >> root@ni-e31x-F661C4:~# [ 49.925787] fpga_manager fpga0: writing >> e310_sg1_idle.bin to Xilinx Zynq FPGA Manager >> [ 50.121918] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /fpga-full/firmware-name >> [ 50.146427] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/devctrl >> [ 50.156208] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/charger >> [ 50.186332] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/battery >> [ 50.716349] e31x-pmu: probe of fpga-full:pmu failed with error -524 >> >> root@ni-e31x-F661C4:~/logs# uhd_usrp_probe >> [INFO] [UHD] linux; GNU C++ version 9.2.0; Boost_107100; >> UHD_4.0.0.0-0-g90ce6062 >> [INFO] [MPMD] Initializing 1 device(s) in parallel with args: >> mgmt_addr=127.0.0.1,type=e3xx,product=e310_sg1,serial=F661C4,claimed= >> False >> [ 649.706380] fpga_manager fpga0: writing e310_sg1.bin to Xilinx Zynq FPGA >> Manager >> [ 649.782720] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /fpga-full/firmware-name >> [ 649.792926] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /amba/spi@e0006000/status >> [ 649.803194] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /amba/spi@e0006000/cs-gpios >> [ 649.813823] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/spidev0 >> [ 649.823667] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/devctrl >> [ 649.833505] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/charger >> [ 649.843335] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/battery >> [ 649.853172] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/nixge_internal >> [ 650.384737] e31x-pmu: probe of fpga-full:pmu failed with error -524 >> [ 650.406779] nixge 40020000.ethernet int0: renamed from eth1 >> [ 650.584811] nixge 40020000.ethernet int0: Link is Up - 10Mbps/Half - flow >> control off >> [INFO] [MPM.PeriphManager] Found 1 daughterboard(s). >> [INFO] [MPM.PeriphManager] init() called with device args >> `mgmt_addr=127.0.0.1,product=e310_sg1'. >> [INFO] [0/Radio#0] Performing CODEC loopback test on channel 0 ... >> [INFO] [0/Radio#0] CODEC loopback test passed >> [INFO] [0/Radio#0] Performing CODEC loopback test on channel 1 ... >> [INFO] [0/Radio#0] CODEC loopback test passed >> _____________________________________________________ >> / >> | Device: E300-Series Device >> | _____________________________________________________ >> | / >> | | Mboard: ni-e31x-F661C4 >> | | dboard_0_pid: 272 >> | | dboard_0_serial: F65275 >> | | fs_version: 20200914001743 >> | | mender_artifact: v4.0.0.0_e310_sg1 >> | | mpm_sw_version: 4.0.0.0-g90ce6062 >> | | pid: 30674 >> | | product: e310_sg1 >> | | rev: 0 >> | | rpc_connection: local >> | | serial: F661C4 >> | | type: e3xx >> | | MPM Version: 3.0 >> | | FPGA Version: 6.0 >> | | FPGA git hash: be53058.clean >> | | >> | | Time sources: internal, external, gpsdo >> | | Clock sources: internal >> | | Sensors: ref_locked, gps_locked, temp_fpga, temp_mb, gps_gpgga, >> gps_sky, gps_time, gps_tpv >> | / >> | | RFNoC blocks on this device: >> | | >> | | * 0/Radio#0 >> | _____________________________________________________ >> | / >> | | Static connections on this device: >> | | >> | | * 0/SEP#0:0==>0/Radio#0:0 >> | | * 0/SEP#1:0==>0/Radio#0:1 >> | | * 0/Radio#0:0==>0/SEP#0:0 >> | | * 0/Radio#0:1==>0/SEP#1:0 >> | _____________________________________________________ >> | / >> | | TX Dboard: dboard >> | | _____________________________________________________ >> | | / >> | | | TX Frontend: 0 >> | | | Name: E3xx >> | | | Antennas: TX/RX >> | | | Freq range: 47.000 to 6000.000 MHz >> | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >> | | | Connection Type: IQ >> | | | Uses LO offset: No >> | | _____________________________________________________ >> | | / >> | | | TX Frontend: 1 >> | | | Name: E3xx >> | | | Antennas: TX/RX >> | | | Freq range: 47.000 to 6000.000 MHz >> | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >> | | | Connection Type: IQ >> | | | Uses LO offset: No >> | _____________________________________________________ >> | / >> | | RX Dboard: dboard >> | | _____________________________________________________ >> | | / >> | | | RX Frontend: 0 >> | | | Name: E3xx >> | | | Antennas: RX2, TX/RX >> | | | Freq range: 70.000 to 6000.000 MHz >> | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >> | | | Connection Type: IQ >> | | | Uses LO offset: No >> | _____________________________________________________ >> | | / >> | | | RX Frontend: 1 >> | | | Name: E3xx >> | | | Antennas: RX2, TX/RX >> | | | Freq range: 70.000 to 6000.000 MHz >> | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >> | | | Connection Type: IQ >> | | | Uses LO offset: No >> >> [ 658.474906] nixge 40020000.ethernet int0: Link is Down >> [ 658.590581] fpga_manager fpga0: writing e310_sg1_idle.bin to Xilinx Zynq >> FPGA Manager >> [ 658.671152] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /fpga-full/firmware-name >> [ 658.681463] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/devctrl >> [ 658.691315] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/charger >> [ 658.701150] OF: overlay: WARNING: memory leak will occur if overlay >> removed, property: /__symbols__/battery >> [ 659.219759] e31x-pmu: probe of fpga-full:pmu failed with error -524 >> >> >> >>>> On 20-05-2021 17:31, Martin wrote: >>> I have still no idea why my E310 sg1 does not recognize its own uhd >>> hardware with uhd_find_devices. >>> Can the exact hardware variant be of influence. >>> Mine has partno: 156333B-01L >>> The B in the partnumber seems to indicate the precise hardware revision. >>> The manual says: >>>> The Release 4 image comes in two varieties. The variety that you will need >>>> depends on the product number of your E310 or E312, which is printed on >>>> the bottom of the device. >>>> E310 (15633X-01L) X= A, B, C, D Ettus-e3xx-sg1 >>>> X= E or later Ettus-e3xx-sg3 >>>> E312 (140605X-01L) X = All Ettus-e3xx-sg3 >>> So I have a really early edition. >>> Mine gives this: >>>>>>> root@ni-e31x:~# uhd_find_devices >>>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>>> UHD_3.15.0.0-0-gaea0e2de >>>>>>> -------------------------------------------------- >>>>>>> -- UHD Device 0 >>>>>>> -------------------------------------------------- >>>>>>> Device Address: >>>>>>> serial: >>>>>>> claimed: False >>>>>>> mgmt_addr: 127.0.0.1 >>>>>>> product: >>>>>>> reachable: No >>>>>>> type: >>> Best regards, >>> Martin >>>> On 18-05-2021 14:33, Marcus D. Leech wrote: >>>> On 05/18/2021 05:06 AM, Martin wrote: >>>>> What does uhd_find_devices show on your system? >>>>> >>>>> Martin >>>>> >>>> Device Address: >>>> serial: 30B0152 >>>> claimed: False >>>> mgmt_addr: 127.0.0.1 >>>> product: e310_sg1 >>>> type: e3xx >>>>> >>>>> On 17-05-2021 23:09, Marcus D. Leech wrote: >>>>>> On 05/17/2021 05:03 PM, Martin wrote: >>>>>>> On 17-05-2021 00:10, Marcus D Leech wrote: >>>>>>>> I’m currently trying to reproduce but on an sg3 system. Having >>>>>>>> entirely different problems. >>>>>>> Thank you for looking into this. >>>>>>> I am looking forward to your findings. >>>>>>> What issues do you have with sg3? >>>>>>> Maybe I can help you with that ;-) >>>>>> I mis-spoke as it turns out... >>>>>> >>>>>> My device is an SG1, and running uhd_usrp_probe produces: >>>>>> >>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>> UHD_3.15.0.0-0-gaea0e2e >>>>>> [INFO] [MPMD] Initializing 1 device(s) in parallel with args: >>>>>> mgmt_addr=127.0.0e >>>>>> [ 63.396911] fpga_manager fpga0: writing e310_sg1.bin to Xilinx Zynq >>>>>> FPGA Manr >>>>>> [ 63.597426] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,e >>>>>> [ 63.607629] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,s >>>>>> [ 63.617856] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,s >>>>>> [ 63.629066] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.638894] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,l >>>>>> [ 63.648644] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,r >>>>>> [ 63.658443] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,y >>>>>> [ 63.668206] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.678010] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,1 >>>>>> [ 63.687768] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,2 >>>>>> [ 63.697568] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,3 >>>>>> [ 63.707324] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.717127] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,1 >>>>>> [ 63.726899] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,2 >>>>>> [ 63.736704] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,3 >>>>>> [ 63.746463] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.756698] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,1 >>>>>> [ 63.766927] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,2 >>>>>> [ 63.777182] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,3 >>>>>> [ 63.787416] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.797648] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,1 >>>>>> [ 63.807881] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,2 >>>>>> [ 63.818115] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,3 >>>>>> [ 63.828350] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,0 >>>>>> [ 63.895829] rfnoc_crossbar crossbar0: NI Platform RFNoC Crossbar >>>>>> registered >>>>>> [ 64.419972] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>>>> [ 64.485031] usrp-dma-core: Registered rx-dma0 >>>>>> [ 64.515301] usrp-dma-core: Registered rx-dma1 >>>>>> [ 64.531891] usrp-dma-core: Registered rx-dma2 >>>>>> [ 64.545275] usrp-dma-core: Registered rx-dma3 >>>>>> [ 64.560157] usrp-dma-core: Registered tx-dma0 >>>>>> [ 64.571785] usrp-dma-core: Registered tx-dma1 >>>>>> [ 64.585115] usrp-dma-core: Registered tx-dma2 >>>>>> [ 64.595584] usrp-dma-core: Registered tx-dma3 >>>>>> [INFO] [MPM.main] Launching USRP/MPM, version: 3.15.0.0-gaea0e2de >>>>>> [INFO] [MPM.main] Spawning RPC process... >>>>>> [WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check! >>>>>> [INFO] [MPM.PeriphManager] Device serial number: 30B0152 >>>>>> [WARNING] [MPM.GPSDIface] Could not connect to GPSd! None of the GPS >>>>>> sensors wi! >>>>>> [INFO] [MPM.RPCServer] RPC server ready! >>>>>> [INFO] [MPM.RPCServer] Spawning watchdog task... >>>>>> [INFO] [MPM.PeriphManager] Found 1 daughterboard(s). >>>>>> [INFO] [0/Radio_0] Initializing block control (NOC ID: >>>>>> 0x12AD100000003310) >>>>>> [INFO] [MPM.PeriphManager] init() called with device args >>>>>> `product=e310_sg1,mgm. >>>>>> [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000) >>>>>> [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000002) >>>>>> [INFO] [0/Radio_0] Performing CODEC loopback test... >>>>>> [INFO] [0/Radio_0] CODEC loopback test passed >>>>>> [INFO] [0/Radio_0] Performing CODEC loopback test... >>>>>> [INFO] [0/Radio_0] CODEC loopback test passed >>>>>> _____________________________________________________ >>>>>> / >>>>>> | Device: E300-Series Device >>>>>> | _____________________________________________________ >>>>>> | / >>>>>> | | Mboard: ni-e31x >>>>>> | | mpm_version: 3.15.0.0-gaea0e2de >>>>>> | | pid: 30674 >>>>>> | | product: e310_sg1 >>>>>> | | rev: 4 >>>>>> | | rpc_connection: local >>>>>> | | serial: 30B0152 >>>>>> | | type: e3xx >>>>>> | | MPM Version: 1.2 >>>>>> | | FPGA Version: 1.0 >>>>>> | | FPGA git hash: fde2a94.clean >>>>>> | | RFNoC capable: Yes >>>>>> | | >>>>>> | | Time sources: internal, external, gpsdo >>>>>> | | Clock sources: internal >>>>>> | | Sensors: ref_locked, temp_fpga, temp_mb, gps_locked >>>>>> | | _____________________________________________________ >>>>>> | | / >>>>>> | | | RX Dboard: A >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | RX Frontend: 0 >>>>>> | | | | Name: E3xx >>>>>> | | | | Antennas: RX2, TX/RX >>>>>> | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature >>>>>> | | | | Freq range: 70.000 to 6000.000 MHz >>>>>> | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>> | | | | Connection Type: IQ >>>>>> | | | | Uses LO offset: No >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | RX Frontend: 1 >>>>>> | | | | Name: E3xx >>>>>> | | | | Antennas: RX2, TX/RX >>>>>> | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature >>>>>> | | | | Freq range: 70.000 to 6000.000 MHz >>>>>> | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>> | | | | Connection Type: IQ >>>>>> | | | | Uses LO offset: No >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | RX Codec: A >>>>>> | | | | Name: AD9361 Dual ADC >>>>>> | | | | Gain Elements: None >>>>>> | | _____________________________________________________ >>>>>> | | / >>>>>> | | | TX Dboard: A >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | TX Frontend: 0 >>>>>> | | | | Name: E3xx >>>>>> | | | | Antennas: TX/RX >>>>>> | | | | Sensors: lo_locked, ad9361_temperature >>>>>> | | | | Freq range: 47.000 to 6000.000 MHz >>>>>> | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>> | | | | Connection Type: IQ >>>>>> | | | | Uses LO offset: No >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | TX Frontend: 1 >>>>>> | | | | Name: E3xx >>>>>> | | | | Antennas: TX/RX >>>>>> | | | | Sensors: lo_locked, ad9361_temperature >>>>>> | | | | Freq range: 47.000 to 6000.000 MHz >>>>>> | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>> | | | | Connection Type: IQ >>>>>> | | | | Uses LO offset: No >>>>>> | | | _____________________________________________________ >>>>>> | | | / >>>>>> | | | | TX Codec: A >>>>>> | | | | Name: AD9361 Dual DAC >>>>>> | | | | Gain Elements: None >>>>>> | | _____________________________________________________ >>>>>> | | / >>>>>> | | | RFNoC blocks on this device: >>>>>> | | | >>>>>> | | | * Radio_0 >>>>>> | | | * DDC_0 >>>>>> | | | * DUC_0 >>>>>> >>>>>> [ 72.280024] usrp-dma-core: Deregistered tx-dma3 >>>>>> [ 72.293917] usrp-dma-core: Deregistered tx-dma2 >>>>>> [ 72.304477] usrp-dma-core: Deregistered tx-dma1 >>>>>> [ 72.316396] usrp-dma-core: Deregistered tx-dma0 >>>>>> [ 72.327630] usrp-dma-core: Deregistered rx-dma3 >>>>>> [ 72.339059] usrp-dma-core: Deregistered rx-dma2 >>>>>> [ 72.350350] usrp-dma-core: Deregistered rx-dma1 >>>>>> [ 72.360698] usrp-dma-core: Deregistered rx-dma0 >>>>>> [ 72.401639] fpga_manager fpga0: writing e310_sg1_idle.bin to Xilinx >>>>>> Zynq FPGr >>>>>> [ 72.501239] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,e >>>>>> [ 72.511488] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,l >>>>>> [ 72.521660] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,r >>>>>> [ 72.531642] OF: overlay: WARNING: memory leak will occur if overlay >>>>>> removed,y >>>>>> [ 73.064935] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>>>> root@ni-e31x:~# >>>>>> >>>>>> >>>>>>> >>>>>>> I will also tryout the latest uhd 4.0 sdimg for E310 sg1 as soon as I >>>>>>> have the time. Maybe that has different results. >>>>>>> >>>>>>> I was wondering if the output of uhd_find_devices gives a clue. >>>>>>> Is this the normal expected output whne you run uhd_find_devices on the >>>>>>> E310. >>>>>>> >>>>>>> root@ni-e31x:~# uhd_find_devices >>>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>>> UHD_3.15.0.0-0-gaea0e2de >>>>>>> -------------------------------------------------- >>>>>>> -- UHD Device 0 >>>>>>> -------------------------------------------------- >>>>>>> Device Address: >>>>>>> serial: >>>>>>> claimed: False >>>>>>> mgmt_addr: 127.0.0.1 >>>>>>> product: >>>>>>> reachable: No >>>>>>> type: >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> Martin >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Sent from my iPhone >>>>>>>> >>>>>>>>> On May 16, 2021, at 5:33 PM, Martin <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> On 15-05-2021 18:33, Marcus D. Leech wrote: >>>>>>>>>>> On 05/15/2021 10:19 AM, Martin wrote: >>>>>>>>>>> On 14-05-2021 21:26, Marcus D Leech wrote: >>>>>>>>>>>> What happens if you don’t specify any args at all? >>>>>>>>>>> Then I also get No Device found. >>>>>>>>>>> >>>>>>>>>>> Martin >>>>>>>>>> Martin: >>>>>>>>>> Where did you get your sdimg from? >>>>>>>>> >>>>>>>>> On a host system with UHD 3.15 installed I did: >>>>>>>>> >>>>>>>>> sudo uhd_images_downloader -t sdimg -t e310 -t sg1 >>>>>>>>> >>>>>>>>> [INFO] Images destination: /usr/share/uhd/images >>>>>>>>> The file size for this target (832.3 MiB) exceeds the download limit >>>>>>>>> (100.0 MiB). Continue downloading? [y/N]y >>>>>>>>> [INFO] Downloading e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip, total >>>>>>>>> size: 872729.93 kB >>>>>>>>> [INFO] Images download complete. >>>>>>>>> >>>>>>>>> This seems to download this file and extracts it: >>>>>>>>> https://files.ettus.com/binaries/cache/e3xx/meta-ettus-v3.15.0.0/e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip >>>>>>>>> >>>>>>>>> >>>>>>>>> I wrote the extracted image to a 8 GB sdcard with dd. >>>>>>>>> >>>>>>>>> I also tried downloading the above file by hand and and extracing it >>>>>>>>> to the sdcard. That has the exact same result. >>>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> _______________________________________________ >>> USRP-users mailing list -- [email protected] >>> To unsubscribe send an email to [email protected] >> _______________________________________________ >> USRP-users mailing list -- [email protected] >> To unsubscribe send an email to [email protected] _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
