None of us have been able to reproduce this I have an SG1 device and can’t make this happen, but a later hardware rev.
Sent from my iPhone > On Jun 8, 2021, at 8:25 AM, Martin <[email protected]> wrote: > > On 22-05-2021 15:18, Marcus D Leech wrote: >> Martin: >> I’m >> I’m in discussions with Ettus R&D who are trying to reproduce. > Any news on this? > > A working uhd 3.15 image on E310 sg1 would really be appreciated. > > Is there anything that I can do or test? > > My E310 has partno: 156333B-01L > The exact hardware revision (B in my case) could be a clue. > > Thanks, > Martin > > >> I was unable with mine. >> Sent from my iPhone >>>> On May 20, 2021, at 1:23 PM, Marcus D Leech <[email protected]> >>>> wrote: >>> >>> FYI I see the same memory leak and PMU warnings on my SG1 hardware u der >>> 3.15. So I assume that this is a side effect of the move to MPM for E310 >>> hardware. >>> >>> >>> >>> Sent from my iPhone >>> >>>> On May 20, 2021, at 12:05 PM, Martin <[email protected]> >>>> wrote: >>>> >>>> I tried again with the UHD 4.0.0.0 sdimg >>>> I get a lot of warnings, but with the uhd 4.0.0.0 sdimg the uhd hardware >>>> is recognized. >>>> >>>> I ado see this error with uhd 4.0.0.0: >>>> [ 50.716349] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>> I'm not sure what this means. >>>> >>>> If needed, we could work with the uhd 4.0.0 sdimg, but we would really >>>> like to be able to also keep using our uhd 3.15 development tree. Moving >>>> to uhd 4.0.0.0 would mean installing both uhd 3.15 and uhd 4.0.0.0 trees >>>> on some of our deployment host-machines. Which seems error-prone. >>>> >>>> Alchemy 2020.01 ni-e31x-F661C4 ttyPS0 >>>> >>>> ni-e31x-F661C4 login: root >>>> root@ni-e31x-F661C4:~# uhd_find_devices >>>> [INFO] [UHD] linux; GNU C++ version 9.2.0; Boost_107100; >>>> UHD_4.0.0.0-0-g90ce6062 >>>> No UHD Devices Found >>>> root@ni-e31x-F661C4:~# [ 49.925787] fpga_manager fpga0: writing >>>> e310_sg1_idle.bin to Xilinx Zynq FPGA Manager >>>> [ 50.121918] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /fpga-full/firmware-name >>>> [ 50.146427] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/devctrl >>>> [ 50.156208] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/charger >>>> [ 50.186332] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/battery >>>> [ 50.716349] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>> >>>> root@ni-e31x-F661C4:~/logs# uhd_usrp_probe >>>> [INFO] [UHD] linux; GNU C++ version 9.2.0; Boost_107100; >>>> UHD_4.0.0.0-0-g90ce6062 >>>> [INFO] [MPMD] Initializing 1 device(s) in parallel with args: >>>> mgmt_addr=127.0.0.1,type=e3xx,product=e310_sg1,serial=F661C4,claimed= >>>> False >>>> [ 649.706380] fpga_manager fpga0: writing e310_sg1.bin to Xilinx Zynq >>>> FPGA Manager >>>> [ 649.782720] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /fpga-full/firmware-name >>>> [ 649.792926] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /amba/spi@e0006000/status >>>> [ 649.803194] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /amba/spi@e0006000/cs-gpios >>>> [ 649.813823] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/spidev0 >>>> [ 649.823667] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/devctrl >>>> [ 649.833505] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/charger >>>> [ 649.843335] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/battery >>>> [ 649.853172] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/nixge_internal >>>> [ 650.384737] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>> [ 650.406779] nixge 40020000.ethernet int0: renamed from eth1 >>>> [ 650.584811] nixge 40020000.ethernet int0: Link is Up - 10Mbps/Half - >>>> flow control off >>>> [INFO] [MPM.PeriphManager] Found 1 daughterboard(s). >>>> [INFO] [MPM.PeriphManager] init() called with device args >>>> `mgmt_addr=127.0.0.1,product=e310_sg1'. >>>> [INFO] [0/Radio#0] Performing CODEC loopback test on channel 0 ... >>>> [INFO] [0/Radio#0] CODEC loopback test passed >>>> [INFO] [0/Radio#0] Performing CODEC loopback test on channel 1 ... >>>> [INFO] [0/Radio#0] CODEC loopback test passed >>>> _____________________________________________________ >>>> / >>>> | Device: E300-Series Device >>>> | _____________________________________________________ >>>> | / >>>> | | Mboard: ni-e31x-F661C4 >>>> | | dboard_0_pid: 272 >>>> | | dboard_0_serial: F65275 >>>> | | fs_version: 20200914001743 >>>> | | mender_artifact: v4.0.0.0_e310_sg1 >>>> | | mpm_sw_version: 4.0.0.0-g90ce6062 >>>> | | pid: 30674 >>>> | | product: e310_sg1 >>>> | | rev: 0 >>>> | | rpc_connection: local >>>> | | serial: F661C4 >>>> | | type: e3xx >>>> | | MPM Version: 3.0 >>>> | | FPGA Version: 6.0 >>>> | | FPGA git hash: be53058.clean >>>> | | >>>> | | Time sources: internal, external, gpsdo >>>> | | Clock sources: internal >>>> | | Sensors: ref_locked, gps_locked, temp_fpga, temp_mb, gps_gpgga, >>>> gps_sky, gps_time, gps_tpv >>>> | / >>>> | | RFNoC blocks on this device: >>>> | | >>>> | | * 0/Radio#0 >>>> | _____________________________________________________ >>>> | / >>>> | | Static connections on this device: >>>> | | >>>> | | * 0/SEP#0:0==>0/Radio#0:0 >>>> | | * 0/SEP#1:0==>0/Radio#0:1 >>>> | | * 0/Radio#0:0==>0/SEP#0:0 >>>> | | * 0/Radio#0:1==>0/SEP#1:0 >>>> | _____________________________________________________ >>>> | / >>>> | | TX Dboard: dboard >>>> | | _____________________________________________________ >>>> | | / >>>> | | | TX Frontend: 0 >>>> | | | Name: E3xx >>>> | | | Antennas: TX/RX >>>> | | | Freq range: 47.000 to 6000.000 MHz >>>> | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>> | | | Connection Type: IQ >>>> | | | Uses LO offset: No >>>> | | _____________________________________________________ >>>> | | / >>>> | | | TX Frontend: 1 >>>> | | | Name: E3xx >>>> | | | Antennas: TX/RX >>>> | | | Freq range: 47.000 to 6000.000 MHz >>>> | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>> | | | Connection Type: IQ >>>> | | | Uses LO offset: No >>>> | _____________________________________________________ >>>> | / >>>> | | RX Dboard: dboard >>>> | | _____________________________________________________ >>>> | | / >>>> | | | RX Frontend: 0 >>>> | | | Name: E3xx >>>> | | | Antennas: RX2, TX/RX >>>> | | | Freq range: 70.000 to 6000.000 MHz >>>> | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>> | | | Connection Type: IQ >>>> | | | Uses LO offset: No >>>> | _____________________________________________________ >>>> | | / >>>> | | | RX Frontend: 1 >>>> | | | Name: E3xx >>>> | | | Antennas: RX2, TX/RX >>>> | | | Freq range: 70.000 to 6000.000 MHz >>>> | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>> | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>> | | | Connection Type: IQ >>>> | | | Uses LO offset: No >>>> >>>> [ 658.474906] nixge 40020000.ethernet int0: Link is Down >>>> [ 658.590581] fpga_manager fpga0: writing e310_sg1_idle.bin to Xilinx >>>> Zynq FPGA Manager >>>> [ 658.671152] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /fpga-full/firmware-name >>>> [ 658.681463] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/devctrl >>>> [ 658.691315] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/charger >>>> [ 658.701150] OF: overlay: WARNING: memory leak will occur if overlay >>>> removed, property: /__symbols__/battery >>>> [ 659.219759] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>> >>>> >>>> >>>>>> On 20-05-2021 17:31, Martin wrote: >>>>> I have still no idea why my E310 sg1 does not recognize its own uhd >>>>> hardware with uhd_find_devices. >>>>> Can the exact hardware variant be of influence. >>>>> Mine has partno: 156333B-01L >>>>> The B in the partnumber seems to indicate the precise hardware revision. >>>>> The manual says: >>>>>> The Release 4 image comes in two varieties. The variety that you will >>>>>> need depends on the product number of your E310 or E312, which is >>>>>> printed on the bottom of the device. >>>>>> E310 (15633X-01L) X= A, B, C, D Ettus-e3xx-sg1 >>>>>> X= E or later Ettus-e3xx-sg3 >>>>>> E312 (140605X-01L) X = All Ettus-e3xx-sg3 >>>>> So I have a really early edition. >>>>> Mine gives this: >>>>>>>>> root@ni-e31x:~# uhd_find_devices >>>>>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>>>>> UHD_3.15.0.0-0-gaea0e2de >>>>>>>>> -------------------------------------------------- >>>>>>>>> -- UHD Device 0 >>>>>>>>> -------------------------------------------------- >>>>>>>>> Device Address: >>>>>>>>> serial: >>>>>>>>> claimed: False >>>>>>>>> mgmt_addr: 127.0.0.1 >>>>>>>>> product: >>>>>>>>> reachable: No >>>>>>>>> type: >>>>> Best regards, >>>>> Martin >>>>>> On 18-05-2021 14:33, Marcus D. Leech wrote: >>>>>> On 05/18/2021 05:06 AM, Martin wrote: >>>>>>> What does uhd_find_devices show on your system? >>>>>>> >>>>>>> Martin >>>>>>> >>>>>> Device Address: >>>>>> serial: 30B0152 >>>>>> claimed: False >>>>>> mgmt_addr: 127.0.0.1 >>>>>> product: e310_sg1 >>>>>> type: e3xx >>>>>>> >>>>>>> On 17-05-2021 23:09, Marcus D. Leech wrote: >>>>>>>> On 05/17/2021 05:03 PM, Martin wrote: >>>>>>>>> On 17-05-2021 00:10, Marcus D Leech wrote: >>>>>>>>>> I’m currently trying to reproduce but on an sg3 system. Having >>>>>>>>>> entirely different problems. >>>>>>>>> Thank you for looking into this. >>>>>>>>> I am looking forward to your findings. >>>>>>>>> What issues do you have with sg3? >>>>>>>>> Maybe I can help you with that ;-) >>>>>>>> I mis-spoke as it turns out... >>>>>>>> >>>>>>>> My device is an SG1, and running uhd_usrp_probe produces: >>>>>>>> >>>>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>>>> UHD_3.15.0.0-0-gaea0e2e >>>>>>>> [INFO] [MPMD] Initializing 1 device(s) in parallel with args: >>>>>>>> mgmt_addr=127.0.0e >>>>>>>> [ 63.396911] fpga_manager fpga0: writing e310_sg1.bin to Xilinx Zynq >>>>>>>> FPGA Manr >>>>>>>> [ 63.597426] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,e >>>>>>>> [ 63.607629] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,s >>>>>>>> [ 63.617856] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,s >>>>>>>> [ 63.629066] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.638894] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,l >>>>>>>> [ 63.648644] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,r >>>>>>>> [ 63.658443] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,y >>>>>>>> [ 63.668206] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.678010] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,1 >>>>>>>> [ 63.687768] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,2 >>>>>>>> [ 63.697568] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,3 >>>>>>>> [ 63.707324] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.717127] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,1 >>>>>>>> [ 63.726899] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,2 >>>>>>>> [ 63.736704] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,3 >>>>>>>> [ 63.746463] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.756698] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,1 >>>>>>>> [ 63.766927] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,2 >>>>>>>> [ 63.777182] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,3 >>>>>>>> [ 63.787416] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.797648] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,1 >>>>>>>> [ 63.807881] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,2 >>>>>>>> [ 63.818115] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,3 >>>>>>>> [ 63.828350] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,0 >>>>>>>> [ 63.895829] rfnoc_crossbar crossbar0: NI Platform RFNoC Crossbar >>>>>>>> registered >>>>>>>> [ 64.419972] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>>>>>> [ 64.485031] usrp-dma-core: Registered rx-dma0 >>>>>>>> [ 64.515301] usrp-dma-core: Registered rx-dma1 >>>>>>>> [ 64.531891] usrp-dma-core: Registered rx-dma2 >>>>>>>> [ 64.545275] usrp-dma-core: Registered rx-dma3 >>>>>>>> [ 64.560157] usrp-dma-core: Registered tx-dma0 >>>>>>>> [ 64.571785] usrp-dma-core: Registered tx-dma1 >>>>>>>> [ 64.585115] usrp-dma-core: Registered tx-dma2 >>>>>>>> [ 64.595584] usrp-dma-core: Registered tx-dma3 >>>>>>>> [INFO] [MPM.main] Launching USRP/MPM, version: 3.15.0.0-gaea0e2de >>>>>>>> [INFO] [MPM.main] Spawning RPC process... >>>>>>>> [WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check! >>>>>>>> [INFO] [MPM.PeriphManager] Device serial number: 30B0152 >>>>>>>> [WARNING] [MPM.GPSDIface] Could not connect to GPSd! None of the GPS >>>>>>>> sensors wi! >>>>>>>> [INFO] [MPM.RPCServer] RPC server ready! >>>>>>>> [INFO] [MPM.RPCServer] Spawning watchdog task... >>>>>>>> [INFO] [MPM.PeriphManager] Found 1 daughterboard(s). >>>>>>>> [INFO] [0/Radio_0] Initializing block control (NOC ID: >>>>>>>> 0x12AD100000003310) >>>>>>>> [INFO] [MPM.PeriphManager] init() called with device args >>>>>>>> `product=e310_sg1,mgm. >>>>>>>> [INFO] [0/DDC_0] Initializing block control (NOC ID: >>>>>>>> 0xDDC0000000000000) >>>>>>>> [INFO] [0/DUC_0] Initializing block control (NOC ID: >>>>>>>> 0xD0C0000000000002) >>>>>>>> [INFO] [0/Radio_0] Performing CODEC loopback test... >>>>>>>> [INFO] [0/Radio_0] CODEC loopback test passed >>>>>>>> [INFO] [0/Radio_0] Performing CODEC loopback test... >>>>>>>> [INFO] [0/Radio_0] CODEC loopback test passed >>>>>>>> _____________________________________________________ >>>>>>>> / >>>>>>>> | Device: E300-Series Device >>>>>>>> | _____________________________________________________ >>>>>>>> | / >>>>>>>> | | Mboard: ni-e31x >>>>>>>> | | mpm_version: 3.15.0.0-gaea0e2de >>>>>>>> | | pid: 30674 >>>>>>>> | | product: e310_sg1 >>>>>>>> | | rev: 4 >>>>>>>> | | rpc_connection: local >>>>>>>> | | serial: 30B0152 >>>>>>>> | | type: e3xx >>>>>>>> | | MPM Version: 1.2 >>>>>>>> | | FPGA Version: 1.0 >>>>>>>> | | FPGA git hash: fde2a94.clean >>>>>>>> | | RFNoC capable: Yes >>>>>>>> | | >>>>>>>> | | Time sources: internal, external, gpsdo >>>>>>>> | | Clock sources: internal >>>>>>>> | | Sensors: ref_locked, temp_fpga, temp_mb, gps_locked >>>>>>>> | | _____________________________________________________ >>>>>>>> | | / >>>>>>>> | | | RX Dboard: A >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | RX Frontend: 0 >>>>>>>> | | | | Name: E3xx >>>>>>>> | | | | Antennas: RX2, TX/RX >>>>>>>> | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature >>>>>>>> | | | | Freq range: 70.000 to 6000.000 MHz >>>>>>>> | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>>>> | | | | Connection Type: IQ >>>>>>>> | | | | Uses LO offset: No >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | RX Frontend: 1 >>>>>>>> | | | | Name: E3xx >>>>>>>> | | | | Antennas: RX2, TX/RX >>>>>>>> | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature >>>>>>>> | | | | Freq range: 70.000 to 6000.000 MHz >>>>>>>> | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB >>>>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>>>> | | | | Connection Type: IQ >>>>>>>> | | | | Uses LO offset: No >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | RX Codec: A >>>>>>>> | | | | Name: AD9361 Dual ADC >>>>>>>> | | | | Gain Elements: None >>>>>>>> | | _____________________________________________________ >>>>>>>> | | / >>>>>>>> | | | TX Dboard: A >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | TX Frontend: 0 >>>>>>>> | | | | Name: E3xx >>>>>>>> | | | | Antennas: TX/RX >>>>>>>> | | | | Sensors: lo_locked, ad9361_temperature >>>>>>>> | | | | Freq range: 47.000 to 6000.000 MHz >>>>>>>> | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>>>> | | | | Connection Type: IQ >>>>>>>> | | | | Uses LO offset: No >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | TX Frontend: 1 >>>>>>>> | | | | Name: E3xx >>>>>>>> | | | | Antennas: TX/RX >>>>>>>> | | | | Sensors: lo_locked, ad9361_temperature >>>>>>>> | | | | Freq range: 47.000 to 6000.000 MHz >>>>>>>> | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB >>>>>>>> | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz >>>>>>>> | | | | Connection Type: IQ >>>>>>>> | | | | Uses LO offset: No >>>>>>>> | | | _____________________________________________________ >>>>>>>> | | | / >>>>>>>> | | | | TX Codec: A >>>>>>>> | | | | Name: AD9361 Dual DAC >>>>>>>> | | | | Gain Elements: None >>>>>>>> | | _____________________________________________________ >>>>>>>> | | / >>>>>>>> | | | RFNoC blocks on this device: >>>>>>>> | | | >>>>>>>> | | | * Radio_0 >>>>>>>> | | | * DDC_0 >>>>>>>> | | | * DUC_0 >>>>>>>> >>>>>>>> [ 72.280024] usrp-dma-core: Deregistered tx-dma3 >>>>>>>> [ 72.293917] usrp-dma-core: Deregistered tx-dma2 >>>>>>>> [ 72.304477] usrp-dma-core: Deregistered tx-dma1 >>>>>>>> [ 72.316396] usrp-dma-core: Deregistered tx-dma0 >>>>>>>> [ 72.327630] usrp-dma-core: Deregistered rx-dma3 >>>>>>>> [ 72.339059] usrp-dma-core: Deregistered rx-dma2 >>>>>>>> [ 72.350350] usrp-dma-core: Deregistered rx-dma1 >>>>>>>> [ 72.360698] usrp-dma-core: Deregistered rx-dma0 >>>>>>>> [ 72.401639] fpga_manager fpga0: writing e310_sg1_idle.bin to Xilinx >>>>>>>> Zynq FPGr >>>>>>>> [ 72.501239] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,e >>>>>>>> [ 72.511488] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,l >>>>>>>> [ 72.521660] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,r >>>>>>>> [ 72.531642] OF: overlay: WARNING: memory leak will occur if overlay >>>>>>>> removed,y >>>>>>>> [ 73.064935] e31x-pmu: probe of fpga-full:pmu failed with error -524 >>>>>>>> root@ni-e31x:~# >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> I will also tryout the latest uhd 4.0 sdimg for E310 sg1 as soon as I >>>>>>>>> have the time. Maybe that has different results. >>>>>>>>> >>>>>>>>> I was wondering if the output of uhd_find_devices gives a clue. >>>>>>>>> Is this the normal expected output whne you run uhd_find_devices on >>>>>>>>> the E310. >>>>>>>>> >>>>>>>>> root@ni-e31x:~# uhd_find_devices >>>>>>>>> [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; >>>>>>>>> UHD_3.15.0.0-0-gaea0e2de >>>>>>>>> -------------------------------------------------- >>>>>>>>> -- UHD Device 0 >>>>>>>>> -------------------------------------------------- >>>>>>>>> Device Address: >>>>>>>>> serial: >>>>>>>>> claimed: False >>>>>>>>> mgmt_addr: 127.0.0.1 >>>>>>>>> product: >>>>>>>>> reachable: No >>>>>>>>> type: >>>>>>>>> >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Martin >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Sent from my iPhone >>>>>>>>>> >>>>>>>>>>> On May 16, 2021, at 5:33 PM, Martin >>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> On 15-05-2021 18:33, Marcus D. Leech wrote: >>>>>>>>>>>>> On 05/15/2021 10:19 AM, Martin wrote: >>>>>>>>>>>>> On 14-05-2021 21:26, Marcus D Leech wrote: >>>>>>>>>>>>>> What happens if you don’t specify any args at all? >>>>>>>>>>>>> Then I also get No Device found. >>>>>>>>>>>>> >>>>>>>>>>>>> Martin >>>>>>>>>>>> Martin: >>>>>>>>>>>> Where did you get your sdimg from? >>>>>>>>>>> >>>>>>>>>>> On a host system with UHD 3.15 installed I did: >>>>>>>>>>> >>>>>>>>>>> sudo uhd_images_downloader -t sdimg -t e310 -t sg1 >>>>>>>>>>> >>>>>>>>>>> [INFO] Images destination: /usr/share/uhd/images >>>>>>>>>>> The file size for this target (832.3 MiB) exceeds the download >>>>>>>>>>> limit (100.0 MiB). Continue downloading? [y/N]y >>>>>>>>>>> [INFO] Downloading e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip, total >>>>>>>>>>> size: 872729.93 kB >>>>>>>>>>> [INFO] Images download complete. >>>>>>>>>>> >>>>>>>>>>> This seems to download this file and extracts it: >>>>>>>>>>> https://files.ettus.com/binaries/cache/e3xx/meta-ettus-v3.15.0.0/e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip >>>>>>>>>>> >>>>>>>>>>> I wrote the extracted image to a 8 GB sdcard with dd. >>>>>>>>>>> >>>>>>>>>>> I also tried downloading the above file by hand and and extracing >>>>>>>>>>> it to the sdcard. That has the exact same result. >>>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> _______________________________________________ >>>>> USRP-users mailing list -- [email protected] >>>>> To unsubscribe send an email to [email protected] >>>> _______________________________________________ >>>> USRP-users mailing list -- [email protected] >>>> To unsubscribe send an email to [email protected] > _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
