This is why most folks who are using a shared PPS signal also use a shared 10Mhz reference signal.
Sent from my iPhone > On Jul 2, 2021, at 9:00 AM, Oscar Pablo <[email protected]> wrote: > > > HI Marcus, > this timestamp in the metadata is not the accurate timestamp this timestamp > is computed from the the sample count so the accuracy is depend on the > accuracy of the on board crystal. so why i want to know the time of last pps > because usrp do not keep the time sync to PPS. the sync only happen when set > the time of PPS. for example when set next pps time to 0 seconds then after 1 > hour the pps time should be 3600 seconds but for the error of the on board > crystal so the pps time is 3600+-error. so we need to keep to know the time > of pps for long time sync. > > > From: Marcus Müller <[email protected]> > Sent: Sunday, May 23, 2021 7:53 PM > To: Oscar Pablo <[email protected]>; [email protected] > <[email protected]> > Subject: Re: [USRP-users] how to get time of last pps during streaming > > Hi Oscar, > > > the metadata contains a timestamp. That's literally a timestamp – If you know > the time at > *any* PPS, for example because you set it, then you can directly infer the > time at the > last PPS from the timestamp. > > However, usually people care about the time of a sample, not the time at the > last PPS. > > > Best regards, > > Marcus > > On 23.05.21 04:36, Oscar Pablo wrote: > > Hi, > > i want to know the time of each pps during rx streaming. i don't know if i > > call > > get_time_last_pps will cause the overload? is there a way to let uhd put > > time of last > > pps in the meta data of the received data? > > > > _______________________________________________ > > USRP-users mailing list -- [email protected] > > To unsubscribe send an email to [email protected] > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
