Hello, I have two N210s and an E312, and I'm not able to detect any of them with uhd_find_devices.
I have set a static IP address on my computer as well as on the radio. I have a gigabit ethernet cable, as well as a gigabit port on my laptop. For one of the N210s, I've hit the safe mode button (S2) to boot into a safe image. This appeared to work (lights flashed after I power cycled), but UHD is still not able to detect the device. On the N210, the D and F lights on the front panel light up indicating that the firmware is loaded and the CPLD is loaded, indicating that there isn't a problem with the FPGA and that the device isn't bricked. I am able to ping the device, but uhd_find_devices or uhd_usrp_probe doesn't detect anything, even if input arguments are given such as serial, type, or IP address. For the E312, I was able to run the test example (rx_ascii_art_dft) without any issues. Still wasn't detected by UHD. The version of UHD I have is 4.0.0, but I have also attempted this with multiple previous versions. I used both N210s about 6 months ago and didn't have any issues at all. The E312 hasn't been used before. Thanks in advance, Bobbi
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
