I've attempted this in Ubuntu 20.04 and 18.04.
I had not previously checked that the ports were open, but after disabling
the firewall ("ufw disable") and opening the ports, it still isn't able to
detect the radios.
The nice bold font on the outer casing has convinced me that they are in
fact N210s :)
I'm just about to try an older version of UHD, but that may not be the
issue if Paul was able to get it working with UHD v4.0.0.0
Similar to Paul, fresh install of Ubuntu 18.04
gigabit ethernet port
have set ip address of host computer to 192.168.10.1, netmask to 24
(255.255.255.0)
Could it be an error with how I installed UHD? No errors were given during
installation, but all three radios appear to be working correctly so I'm
starting to doubt it's an issue with the radios. I have tried installing
UHD three ways:
1.) Binary installation
2.) Installing from source
3.) Pybombs
None gave me errors, but none have worked either. Currently using the
version installed from source.
On Thu, Aug 12, 2021 at 9:15 PM Marcus D. Leech <patchvonbr...@gmail.com>
wrote:
> On 08/12/2021 09:12 PM, Paul Atreides wrote:
> > In an attempt to help out with this I just fired up my old N210 and it
> shows up in uhd_find_devices with UHD v4.0.0.0
> >
> > I have a fresh install of Ubuntu 20.04
> > Usb3 to Ethernet dongle
> Those aren't really recommended for actual use (USB3 to 1GiGe dongles).
> Many of them arbitrarily re-order
> packets. But for quick sanity tests, seem to work OK.
>
> > Default network settings except for setting my up address to
> 192.168.10.1 (my radio is 192.168.10.4) and the netmask to 24
> >
> >
> >
> > <end transmission>
> >
> >> On Aug 12, 2021, at 20:32, Marcus D. Leech <patchvonbr...@gmail.com>
> wrote:
> >>
> >>
> >> On 08/12/2021 07:50 PM, Bobbi Taylor wrote:
> >>> I just reset it again, the IP address was correct, the CPLD and
> firmware lights were on, and I could ping it. But as soon as I try to load
> an image, I still get the No UHD devices found error.
> >>>
> >>>
> >>> <mime-attachment.png>
> >>>
> >>>
> >>>
> >> Is this inside a VM or on a "bare metal" Linux system?
> >>
> >> Is port 49152 and 49153 "open" for UDP?
> >>
> >> Are you sure that these are N210 devices?
> >>
> >> If you revert to UHD 3.15 or even 3.14, does the behavior change?
> >>
> >>
> >> _______________________________________________
> >> USRP-users mailing list -- usrp-users@lists.ettus.com
> >> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
>
>
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
