Hi!
This is what appears:
itupac@itupac:/usr/local/lib/uhd/utils$ ./usrp_burn_mb_eeprom --args
"addr=192.168.10.3" --read-all
Creating USRP device from address: addr=192.168.10.3
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
UHD_3.14.0.HEAD-0-g6875d061
[INFO] [USRP2] Opening a USRP2/N-Series device...
[INFO] [USRP2] Current recv frame size: 1472 bytes
[INFO] [USRP2] Current send frame size: 1472 bytes
[WARNING] [USRP2] Unable to identify device - assuming USRP2/N-Series device
[WARNING] [UHD] Unable to set the thread priority. Performance may be
negatively affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
Fetching current settings from EEPROM...
EEPROM ["hardware"] is ""
EEPROM ["revision"] is ""
EEPROM ["product"] is ""
EEPROM ["mac-addr"] is "00:00:00:00:40:00"
EEPROM ["ip-addr"] is "192.168.10.3"
EEPROM ["subnet"] is "0.0.0.104"
EEPROM ["gateway"] is "255.255.255.255"
EEPROM ["gpsdo"] is "none"
EEPROM ["serial"] is "0"
EEPROM ["name"] is ""
Power-cycle the USRP device for the changes to take effect.
Done
[WARNING] [UHD] Unable to set the thread priority. Performance may be
negatively affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
El vie, 22 oct 2021 a las 12:33, Marcus D. Leech (<[email protected]>)
escribió:
> On 2021-10-22 11:33 a.m., isaac mario tupac davila wrote:
> > Using Device: Single USRP:
> > Device: USRP2 / N-Series Device
> > Mboard 0: N???
> > RX Channel: 0
> > RX DSP: 0
> > RX Dboard: A
> > RX Subdev: BasicRX (AB)
> > TX Channel: 0
> > TX DSP: 0
> > TX Dboard: A
> > TX Subdev: Unknown (0xffff) - 0
>
> If you look here:
>
> Using Device: Single USRP:
> Device: USRP2 / N-Series Device
> Mboard 0: N???
> RX Channel: 0
> RX DSP: 0
> RX Dboard: A
> RX Subdev: BasicRX (AB)
> TX Channel: 0
> TX DSP: 0
> TX Dboard: A
> TX Subdev: Unknown (0xffff) - 0
>
> You can see that it's unable to clearly identify what type of device
> this is. This implies that the motherboard EEPROM contains invalid data.
>
> What happens if you:
>
> /usr/lib/uhd/utils/usrp_burn_mb_eeprom --args "addr=192.168.10.2"
> --read-all
>
> Or substitute whatever IP address your device has.
>
>
>
>
>
>
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
