For what it’s worth, the RFNoC blocks are included in GNURadio 3.9 in both maint-3.9 and tag 3.9.4 I haven’t tested them yet, but it appears as though they are actively being maintained.
<end transmission> > On Dec 20, 2021, at 05:26, Michael Hermann <[email protected]> wrote: > > Hello, > > i am currently working on a small project using an USRP X310 combined with > UHD 4.0, gr-ettus 3.8 and GNUradio 3.8 on Ubuntu 20.04. > The final goal would be to implement the following flowgraph on an FPGA > without transferring data to the host in between: > > RX Radio ( -> DDC) -> FIR (-> DUC) -> TX Radio > > I followed the workshop example and implemented the gain block successfully > and it works for the mentioned examples. I tried to implement the above > mentioned flowgraph with the gain block instead of a FIR filter for testing > purposes. This setup does not seem to work correctly even tough GNUradio does > not display any errors messages. The TX Radio does not transmit a signal, > even if there is an input on the RX Radio Part. Weirdly enough, if i use the > following flowgraph > > RX Radio -> DDC -> RX Streamer -> TX Streamer -> gain -> DUC -> TX Radio > > the setup works and successfully relays the signal but routes the data > through the host which i want to avoid since the goal is to fully process the > signal on the FPGA. > > Greetings and thanks in advance, > Michael > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
