On 2022-02-22 07:36, Alvaro Pendas Recondo wrote:
Hello,
When I work with 1 B210 I can get 2 Rx perfectly synchronized as
expected. Also, if I use 2 B210 with 1 Rx each, I can synchronize them
with an external reference (in this case the octoclock) without any
problem. However, when using 2 B210 with 2 Rx each (4 Rx in total) the
synchronization is still perfect between Rx of the same devices, but
has some problems between Rx of different devices. Of course, the
result with the octoclock is way better than if I do not use any
external reference. Nevertheless, it seems that there are some
problems with the phase sync (although the frequency sync seems
correct). I wonder if this is a hardware limitation or if there is
something I am not doing right.
Thank you very much,
Álvaro
You could perhaps share with us the code you're using to set-up sync
among all 4 channels. The B2xx series is not actually designed to
support synchronization external
to the board, but in some cases, you can sort-of achieve it.
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
