On the X440, I'd like my block to be able to output to both QSFP+ ports. I will be setting this up using remote streaming and I am wondering the appropriate way to set up my block to be able to output to both ports. From the little blurb on remote streaming here:
https://files.ettus.com/manual/page_stream.html#stream_remote I see that I can supply: - dest_addr, dest_port, dest_mac_addr, adapter The example uses the MultiUSRP object but I am using straight RFNoC. I assume I need to do this for every stream that I might create, so for the N ports that are on my block, I need N RX streams that define those values, right? If I had 4 ports, and I wanted to split 2 ports on sfp0 and 2 on sfp1, I'd create the stream for all 4 then issue the stream command to each one and I should see the packets flow? Thanks, Brian
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
