One more question regarding remote streaming. I have a block which has a single CHDR output, but 4 "output ports". I have an endpoint with 4 inputs.
Am I able to stream my block outputs to different remote locations? When I try it, it just seems to want to stream to the same software endpoint and whatever the last configuration was written is used. I think this makes sense as looking through the HDL, it seems like each chdr_stream_endpoint can only address a single destination endpoint. So if I want to use multiple remote streams at different remotes, I'd need to instantiate a single endpoint for each remote stream I want - right? Can this be confirmed? Thanks, Brian On Wed, May 21, 2025 at 3:23 AM Martin Braun <martin.br...@ettus.com> wrote: > > > On Fri, May 16, 2025 at 10:18 PM Brian Padalino <bpadal...@gmail.com> > wrote: > >> On the X440, I'd like my block to be able to output to both QSFP+ ports. >> I will be setting this up using remote streaming and I am wondering the >> appropriate way to set up my block to be able to output to both ports. From >> the little blurb on remote streaming here: >> >> https://files.ettus.com/manual/page_stream.html#stream_remote >> >> I see that I can supply: >> >> - dest_addr, dest_port, dest_mac_addr, adapter >> >> The example uses the MultiUSRP object but I am using straight RFNoC. I >> assume I need to do this for every stream that I might create, so for the N >> ports that are on my block, I need N RX streams that define those values, >> right? >> > > Yes, exactly. > > >> If I had 4 ports, and I wanted to split 2 ports on sfp0 and 2 on sfp1, >> I'd create the stream for all 4 then issue the stream command to each one >> and I should see the packets flow? >> > > That's right. > > --M > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
