>I don't have the exact options, but some help to troubleshoot. When you say
>"it says No APM support compiled into the kernel", what is "it"? What does
>dmesg have relating to APM or ACPI?
>
>Matt W.
Sorry, 'it' is when I run apm, as in
[EMAIL PROTECTED]:ryan>> apm
No APM support in kernel
[EMAIL PROTECTED]:ryan>>
dmesg apm gives this. I don't know what a lot of it means.
Linux version 2.4.20-gentoo-r8 ([EMAIL PROTECTED]) (gcc version 3.2.3 20030422 (
Gentoo Linux 1.4 3.2.3-r2, propolice)) #1 Tue Nov 11 19:36:16 MST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131042
zone(0): 4096 pages.
zone(1): 126946 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 DELL ) @ 0x000fde50
ACPI: RSDT (v001 DELL CPi R 10194.02065) @ 0x000fde64
ACPI: FADT (v001 DELL CPi R 10194.02065) @ 0x000fde90
ACPI: DSDT (v001 INT430 SYSFexxx 00000.04097) @ 0x00000000
ACPI: BIOS passes blacklist
Kernel command line: root=/dev/hda7
Initializing CPU#0
Detected 1794.807 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 511104k/524168k available (1492k kernel code, 10500k reserved, 287k data
, 100k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by [EMAIL PROTECTED]
proc config counted 6528 bytes in names
proc config counted 711 bytes in value handles
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7, enabled at IRQ 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: Power Resource [PADA] (on)
PCI: Probing PCI hardware
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off
'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23DA-30, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
hdc: IBM-DADA-26480, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0173344, I/O limit 4095Mb (mask 0xffffffff)
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100)
blk: queue c0173690, I/O limit 4095Mb (mask 0xffffffff)
hdc: 12685680 sectors (6495 MB) w/460KiB Cache, CHS=13424/15/63, UDMA(33)
hdb: ATAPI 24X DVD-ROM drive, 192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus1/target0/lun0: [PTBL] [789/255/63] p1 p2 p3 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simo
[EMAIL PROTECTED])
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1406k freed
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
3ware Storage Controller device driver for Linux v1.02.00.031.
3w-xxxx: No cards with valid units found.
NCR53c406a: no available ports found
Red Hat/Adaptec aacraid driver, Nov 11 2003
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
sim710: No NCR53C710 adapter found.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xbf80, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xbf20, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:1d.0-1, assigned address 2
input0: USB HID v1.00 Mouse [Kensington USB/PS2 Wheel Mouse ] on usb1:2.0
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 100k freed
Adding Swap: 522072k swap-space (priority -1)
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16
19:03:09 PDT 2003
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
reiserfs: checking transaction log (device 16:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 578 $ Ben Collins <[EMAIL PROTECTED]>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=
[2048]
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:00.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ieee1394: Host added: Node[00:1023] GUID[344fc0002a586c21] [Linux OHCI-1394]
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI IS
APNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Intel 810 + AC97 Audio, version 0.24, 23:04:16 Nov 12 2003
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0xdc80 and 0xd800, MEM 0x0000 and 0x0000, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: CRY91(Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
eth0: no IPv6 routers present
inserting floppy driver for 2.4.20-gentoo-r8
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ps, ACPI is not enabled in the kernel, since before when I had both enabled apm didn't
work.
Thanks, Ryan
_____________________________________________________________
Linux.Net -->Open Source to everyone
Powered by Linare Corporation
http://www.linare.com/
____________________
BYU Unix Users Group
http://uug.byu.edu/
___________________________________________________________________
List Info: http://uug.byu.edu/cgi-bin/mailman/listinfo/uug-list
